Tender For Renovation Work Of Amrut Cell,Sliguri Mc
Tender Value
6.86 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
5 days left
EMD
13729
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work Of Amrut Cell,Sliguri Mc
BOQ
| Sl. No. | Item Description |
| 1 | Supplying,fitting & fixing in position suspended false ceiling with frame work ofaluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined withaluminium corners of size 38mm X 25mm, suspended by aluminium hollow tubesection of size 38mm X 25mm having size of 600mm X 600mm ceiling withaluminium composit panels (ACP) - Interior grade of thickness 3.0mm comprisingof proctective film, polyester coating, primer, aluminium coil, adhesive film,polyethylene core again with one layer adhesive film, aluminium bottom coatingand finally service coating as per manufacturer's specification finished withaluminium screw and silicon sealent complete in all respect including allincidental charges etc. as per direction of Engineer-in-charge |
| 2 | Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top,bottom and side member, intermediate member , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983and IS: 1285-1975, annodized conforming toIS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete asper architectural drawings and direction of Engineer-in-charge.( Excluding cost of glass/ panel board,10-12 Micron thickness Annodizing film.Natural white.a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90sqm |
| 3 | Wall panelling / partition with melamine faced 3 layered flat pressed wood particle board of approval make and brand as per direction of engineering-in charge of requisite grade bonded with phenol formaldehyde synthetic rasin conforming to I.S. 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)in ground floor.(A) Plain: conforming to IS: 3087 - 1985.(i) plain : Exterior grade.(c)18mm thick. |
| 4 | Supplying fitting , fixing decorative lamination conforming to IS-2046 : 1995 as per approved make, brand , finish and thick ness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-Charge. The rate includes the cost of labour, adhesive and all incidental charges thereof.in ground floor Glossy/Matt/Suede excluding surface texture of metallic lustre.(i) Thick ness of laminate 1.5mm. |
| 5 | (ii) Thick ness of laminate 1mm. (Add. above ground floor - 1st. floor) |
| 6 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde sythetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per designn as per approval and direction of Engineer-In-Charge.[ excluding the cost of supporting frame work and teak wood batten/ipping ]in ground floor.(ii) 6 mm. (ii) 6 mm. |
| 7 | (iv)12 mm. |
| 8 | (vi) 19 mm. |
| 9 | Taking out carefully Ranigunge pattern tiles from roof stacking seviceable tiles at site and removing rubbish as directed with in a lead of 75m.(Payment to be made on the measurement of portion of roof removed). |
| 10 | Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. . |
| 11 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer'sspecification [Cement to be supplied by the Department] |
| 12 | Extra rate for using water proofing and plasticising admixture @ 0.2% byweight of cement (or at manufacturer's specified rate) for concrete of variousgrades. |
| 13 | 40 mm. thick damp proof course with cement concrete(1:1.5:3) (with graded stone chips 20 mm nominal size) withwater proofing compound of approved brand @ 0.2% weightof cement including cost of materials over two coats of nontoxic acrylic polymer modified cementitious waterproofingslurry coat complete [cost of water proofing compound andnon toxic paint to be paid seperately) for underground waterretaining structures.[water proofing as per item no 9 and non toxic paint as peritem no. 8 (b) of subhead C of Section 'C' ] |
| 14 | Supply best Indian laminated safety glass 5 mm. thick including cutting to required sizes, setting on putty bases and fitted and fixed with teak glazing beads (19 mm. x 12 mm.) including putty and nails as necessary complete (In all floors.for internal wall & upto 6 m height for external wall).. |
| 15 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor. (Add. above ground floor - 1st. floor) |
| 16 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. |
| 17 | Supplying and laying true to line and level Anti-Skid, Full Body,Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance withIS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr'shardness > 5.0, Staining resistance: Class-1, Water Absorption: E <0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thicklayer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement,synthetic adhesive and grout material to be supplied by the contractor).b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N (Add. above ground floor - 1st. floor) |
| 18 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer'sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be supplied by the CONTRACTOR)(II) With Polymerised Adhesive [6 mm thick] & epoxygrouting materials for filling joints including spacer-2 mm[Applied directly over finished artificial stone floor/ mosaicetc.](A) Deep Colour & White |
| 19 | Supply and installation of (ii) Godrej hydraulic door closer fitted and fixed complete. (a) Heavy type. |
| 20 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thickwith uniform texture & without decorative veins in columns,wall, facia,rise etc. with 15 mm thick [avg] cement mortar(1:2) including making suitable arrangements to hold thestones properly by brass / copper hooks including pointing incement mortar (1:2) (1 white cement : 2 marble dust) withadmixture of pigment matching the stone shades all completeas per direction of the Engineer-in-charge including cost of allmaterials, labours, scaffolding, staging, curing androughening of concrete surface complete.[Using cement slurry at back side of granite @ 4.4 kg/sq.m &white cement slurry for joint filling @ 1.8 kg/sq.m]In ground floor(a) Area of each Granite slab 0.6 to 1.0 Square meter. |
| 21 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately). For Concealed Work.25 mm. |
| 22 | Supplying fitting and fixing concealed cistern of approved make with flash plate cute/loop/shell/Nova (Code No. concealo- H(80 mm Body sap code 508179 of Hindware or equivalent). Matt/Gloss |
| 23 | Suppling, fitting and fixing Wall mounted water closet of white glazedvitreous chinaware of approved make and brand in position complete withnecessary nut and boalts (Equivalent to Code No. 20061 or 92065 &Model Studio or Rubbic of Hidware or equivalent.)(This item to be executed on specific permission of SuperintendingEngineer |
| 24 | Supplying, fitting and fixing white vitreous china Sink in position on C.I. brackets including two coats of painting of brackets. . Laboratory sink with rim and overflow |
| 25 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any foor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Enginer-in-charge) Payment will be made on centre line measurement of the total pipeline including specials.).Above ground.110 mm dia. |
| 26 | Supply ofUPVC pipes & fittings conforming to IS-13592-1992 .Double socketed 3 meter length.110 mm . |
| 27 | L.S cost of other small fittings and fixtures eg mirror,bibcock, toilet fittings etc(payment will be made following specification and rates of PWD SOR in force during tender;contractual rate will be applied during payment) |
| 28 | Providing and fixing factory made door frame (single rebate) made of singlepiece extruded solid PVC profile with homogenous fine cellular structure havingsmooth outer integral skin having 62mm width x 32 mm thickness (the door frameis to be made with single piece extruded solid pvc profile whereas no sheet pastedprofile shall be applied for door frame fabrication) and shall be fixed to wall asper instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws. |
| 29 | Supplying, Fitting & Fixing 30 mm thick Factory made moulded Door shutter,consisting of solid core single leaf flash door of 30 mm thickness lipped with 15mm [5mmx3] thick x 30 mm wide on one style and top rail and 10 mm [5mmx2]thick x 30 mm wide of the other style and bottom rail. The inner panel laminatedwith 2 mm thick termite proof water proof and fire resistant moulded PVC sheetwith raised panel designed in different plain/ or Prelam colour on one side afterrouting the moulded design on flash door and 2mm plain and or Prelam PVCsheet on other side using rubber adhesive on flash door and solvent cementadhesive on the PVC lipping etc. complete excluding hardwares as necessary asper direction of Engineer-in Charge, Manufacturer‟s Specification and drawing..In ground floor.(b) Moulded door using 2 mm Prelam moulded PVC sheet on both side |
| 30 | (b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers, including fitting and fixing complete. |
| 31 | Supplying, fitting, fixing wall mounting water purifier including all alied plumbing works needs service for 2 years /10 stage purifier RO+UV+Alkaline+Minerals water purifier.Minimum Water storage Capacity 7-8 ltr.Brand like Kent ACE plus-B, NATIVE by Urban Company M1 Copper, Livpure LIV-ETERNA-PREMIA |
| 32 | Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. |
| 33 | GST@18% on total of Sl No1-33 |
| 34 | L.Cess @1% on total of Sl No1-34 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender