Supply Of 3.5 LCP TITANIUM DISTAL MEDIAL LEFT TIBIA PLATE- .....3.5 LCP TITANIUMPOSTERO MEDIAL TIBIA PLATE. THE SET SHOULD CONSIST OF ONE PLATE ( 1, 2, 4, 6, 8, OR 10 HOLES) WITH 4 LOCKING SCREWS AND 2 CORTICAL SCREWS.......LCP TITANIUM PROXIMAL LATE

Sharing tender

Supply Of 3.5 lcp titanium distal medial left tibia plate- .....3.5 lcp titaniumpostero medial tibia plate. the set should consist of one plate ( 1, 2, 4, 6, 8, or 10 holes) with 4 locking screws and 2 cortical screws.......lcp titanium proximal lateral left tibia plate- .......lcp titanium proximal lateral right tibia plate-.........lcp titaniumproximal medial left or right tibia plate. the set should consist one plate .....3.5 lcp titanium set for fracture both bones fore arm - consisting of two lcp plates six or seven or eight combi holes......4.5 lcp titanium distal lateral or right femur plate . the set should consist one plate......4.5 lcp titanium distal lateral right femur plate- (a) 5hole l-55mm 4cc screws, l-28mm 4locking screws, .....broad dcp plates- titanium-12,14,16,18 holes with appropriate number of screws varying l-36mm to 52mm cortex screws.......3.5 lcp titanium distal lateral (left or right) tibia plate-. the set should consist of one plate ( 5-13 holed) with 8 locking screws and 2 cortical screws....... , srphc82419040-3.5 lcp titanium proximal medial left or right tibia plate. the se t should consist one plate ( plate should be from length of 4, 6, 8, 10, 12, 14, 16, 18, or 20 c ombiholes) and six locking and two cortical screws (screws of possible lengths as neede d for proximal tibia fixation). each set along with complete set of instrumentation includi ng sleeves and torque limiting screw driver. it must be supplied as and when required basi s. the screw system merges locking screw technology with conventional plating technol ogy. ] , srphc82419065-broad dcp plates-titanium-12,14,16,18 holes with appropriate nu mber of screws varying l-36mm to 52mm cortex screws. a set should consist of one plate and 10 cortical screws. ] , srphc82419015-3.5 lcp titanium distal medial left tibia plate- (a) 5hole l-55mm 4 cc screws, l-28mm 4locking screws, (b) 7hole l-60mm 6cc screws, l-30mm 4locking screws, ( c) 9hole l-75mm 6cc screws, l-30mm 4locking screws, (d) 10hole l-80mm 6 cc screws, l-30mm 4locking screws, (e) 11hole l-85mm 6 cc screws, l-30mm 4locking screws, (f) 13hole l-80mm 6 cc screws, l-30mm 4locking screws. each set along with complete set of instrumentation including sleeves and torque limiting screw driver. it must be supplied as and when required basis. the screw system merges locking screw technology with conven tional plating technology ] , srphc82419050-3.5 lcp titanium set for fracture both bones fore arm - consisti ng of two lcp plates six or seven or eight combi holes for locking or cortical screws an d ten locking screws and 4 cortical screws.the set must be supplied as and when required basis with appropriate sizes and sides (left or right) of plates for the correct si de and appropriate locking screws as and when required.the necessary and correct instr umentation must be supplied along with the set. unit: set ] , srphc82419060-4.5 lcp titanium distal lateral right femur plate- (a) 5hole l-55m m 4cc screws, l-28mm 4locking screws, (b) 7hole l-60mm 6cc screws, l-30mm 4locking screw s, (c) 9hole l-75mm 6cc screws, l-30mm 4locking screws, (d) 10hole l-80mm 6 cc screws, l-30 mm 4locking screws, (e) 11hole l-85mm 6 cc screws, l-30mm 4locking screws, (f) 13hole l-80 mm 6 cc screws, l-30mm 4locking screws. each set along with complete set of instrumenta tion including sleeves and torque limiting screw driver. it must be supplied as and when r equired basis. the screw system merges locking screw technology with conventional plati ng technology ] , srphc82419005-3.5 lcp titanium distal lateral (left or right) tibia plate-. the se t should consist of one plate ( 5-13 holed) with 8 locking screws and 2 cortical screws ( a ll possible length as needed for distal tibia). each set along with complete set of instrum entation including sleeves and torque limiting screw driver. it must be supplied as and wh en required basis. the screw system merges locking screw technology with conventional plating technology. unit:set ] , srphc82419025-3.5 lcp titanium postero medial tibia plate. the set should consi st of one plate ( 1, 2, 4, 6, 8, or 10 holes) with 4 locking screws and 2 cortical screws (appr opriate 3.5mm locking and non locking and 4mm cancellous screws). each set along with c omplete set of instrumentation including sleeves and torque limiting screw driver. it mus t be supplied as and when required basis. the screw system merges locking screw technol ogy with conventional plating technology. unit: set ] , srphc82419035-3.5 lcp titanium proximal lateral right tibia plate-(a) 4hole l-55 mm 4cc screws, l-28mm 4locking screws, (b) 6hole l-60mm 6cc screws, l-30mm 4locking scre ws, (c) 8hole l-65mm 6cc screws, l-30mm 4locking screws, (d) 10hole l-70mm 6cc screws, l-3 0mm 4locking screws, (e) 12hole l-75mm 6cc screws, l-30mm 4locking screws, (f) 14hole l-80 mm 6 cc screws, l-30mm 4locking screws. each set along with complete set of instrumenta tion including sleeves and torque limiting screw driver. it must be supplied as and when r equired basis. the screw system merges locking screw technology with conventional plati ng technology ] , srphc82419030-3.5 lcp titanium proximal lateral left tibia plate-(a) 4hole l-55m m 4cc screws, l-28mm 4locking screws, (b) 6hole l-60mm 6cc screws, l-30mm 4locking screw s, (c) 8hole l-65mm 6cc screws, l-30mm 4locking screws, (d) 10hole l-70mm 6cc screws, l-30 mm 4locking screws, (e) 12hole l-75mm 6cc screws, l-30mm 4locking screws, (f) 14hole l-80 mm 6 cc screws, l-30mm 4locking screws. each set along with complete set of instrumenta tion including sleeves and torque limiting screw driver. it must be supplied as and when r equired basis. the screw system merges locking screw technology with conventional plati ng technology ] , srphc82419055-4.5 lcp titanium distal lateral or right femur plate . the set sh ould consist one plate ( plate should be from length of 5,7,9,11,13 holes) and nine locking and two cortical screws ( screws of possible lengths as needed for distal femur fixation).each set along with complete set of instrumentation including sleeves and torq ue limiting screw driver. it must be supplied as and when required basis. the screw system merges locking screw technology with conventional plating technology. ]