Tender For Construction Of Shops -Cum-Godown At Larm Ganjipora,Pyt:Lg Pora , Block : Vessu
Tender Value
35.48 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
2 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Shops -Cum-Godown At Larm Ganjipora,Pyt:Lg Pora , Block : Vessu
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches bymechanical means (not exceeding 1.5 m in width as well as 10 Sqm. in plan) including dressing of slides and ramming of bottoms, lift up to 1.50 m and disposal lead upto 1.5m. All kinds of Soil. |
| 2 | S/P of Stone Soling hand packed tightly in bed including levelling & ramming. |
| 3 | P/L in position PCC of specified grade excluding the cost of centring and shuttering 1: 4: 8 cement: 4 coarse sand: 8 graded stone aggregate 20mm nominal size). |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) . |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | P/L in position PCC of grade 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm NS) but excluding the cost of centring and shuttering. |
| 7 | Providing and Laying Damp Proof course 50 mm thick with cement mortar in 1:2:4 mix, 20mm nominal size of aggregate and curing complete. |
| 8 | Centring and shuttering including strutting, propping etc. and removal of formwork for. |
| 9 | Filling by Available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 10 | Supplying and filling in plinth with fine sand /Nallah Muck under floors including watering rammiing ,consolidating and dressing , carriage complete job |
| 11 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in Cement mortar 1: 6 (1 cement: 6 sand). |
| 12 | Extra for brick work in superstructure above plinth level upto floor V level. |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs havingslopeupto15°,landings,balconies,shelves,chajjas, lintels, bands, plain window sills, staircases and spiral stair cases uptofive level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 16 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 17 | 5.9.5 Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Applying12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 19 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame and beddings in cement concrete block30x10x10 cm 1: 3: 6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm NS) with all leads lifts & carriages. Complete Job. |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) imported wood (K.D). With all leads lifts & carriages. |
| 21 | Providing and fixing panelled or panelled and glazed shutters for windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately all complete as per direction of engineer in charge. imported Wood 30mm thick. with all leads lifts & carriages. |
| 22 | Providing and fixing wire guage shutters for windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws all complete as per direction of engineer in charge. imported Wood 30mm thick. with all leads lifts & carriages. |
| 23 | Providing and fixing glass panes in windows, clerestory windows, all complete with 4.0mm thick glass panes |
| 24 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 25 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0. 901itre/10sqm over an under coat of primer applied @ 0. 751itre/10Sqm of approved brand and manufacture. |
| 26 | Providing and fixing anchor bolts 16mm Dia. 400mm in length including nuts and washers complete. |
| 27 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour In all colours, shades, except White, Ivory, Fume Red Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. including carriage of materials. Complete job. |
| 28 | Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 50 mm thick 12.50mm nominal size stone aggregate (crushed) including glass strips at a squared interval of 5'x5' all rooms |
| 29 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 30 | Providing and fixing aluminium handles ISI marked anodized 125mm |
| 31 | Providing and fixing aluminium tower bolts ISI marked anodized. 100x10 mm |
| 32 | Structural steel work welded in built up sections, trusses , soffits, eaves boarding and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes / channels etc. |
| 33 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.6 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 34 | P/F of threaded truss bolts of 16 mm dia and 45 cm long with angle iron strip at bottom welded i/c its embedment in concrete as per the directions of site engineer, complete job No. 16.00 200.00 3200 |
| 35 | Providing ridges/ valleys or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 36 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 37 | Carriage of Materials by MT. Lead 10kmCrushed stone Aggregate/Sand |
| 38 | Bricks for an average lead of 10km |
| 39 | Charges for Signboard and photographs and stair railing and other unforeseen items(STA) |
| 40 | Electrical Part-IIWiring for light point/ fan point/exhaust fan point with 1.5.sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit(Including its supply and fixing alongwith acessories) ,with modular switch(Anchor roma urban /eq.make),base plate ,cover plate ,suitable modular GI box etc as required Note The GI boxes can be of different sizes of Modulues to hold the Modular Boxes and Modular Switches for lights/fans/exhaust fans and are included in the point rate |
| 41 | Wiring for circuits/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor Havells/Anchor/Eq.make),single core cable in recessed medium class PVC conduit (Including its supply and fixing alongwith acessories)as required.2x2.5 sq mm for lighting and UPS ckts Note This includes Two wires(Phase , Neutral ) and 1 Ckt meter is equivalent to 2 meters |
| 42 | Wiring for circuits/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor Havells/Anchor/Eq.make),single core cable in recessed medium class PVC conduit (Including its supply and fixing alongwith acessories and making good the surface)as required.2x4 sq mm for heating ckts/ACs Note This includes Two wires (Phase , Neutral ) and 1 Ckt meter is equivalent to 2 meters |
| 43 | Wiring for circuits/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor Havells/Anchor/Eq.make),single core cable in recessed medium class PVC conduit (Including its supply and fixing alongwith acessories and making good the surface)as required.2x10 sqmm for lighting /inverter sub main Note This includes Two wires (Phase , Neutral ) and 1 Ckt meter is equivalent to 2 meters |
| 44 | Supply of fixing of 3\\" GI Deep Junction boxes for lights/fans |
| 45 | Supply of fixing of Suitable GI Box with Modular Plate and cover in front on surface or in recess including providing and fixing of 3 pin 16/32 amp /230 V AC modular socket and 16/32 amp modular switch(Anchor Rourban/SSK NV/Havells /Eq.make) for heating UPS in out and Acs |
| 46 | Supply of fixing of Suitable GI Box with Modular Plate and cover in front on surface or in recess including providing and fixing of 2 nos 3 pin 5/ 6 amp /230 V AC modular socket and 2 nos 5/6 amp modularswitch(Anchor Ro urban/SSK NV/Havells /Eq.make) |
| 47 | Supply installation testing and commissioning of 1200 mm dia sweep Ceilng fan of standard make(minimum 1star) |
| 48 | Supply of fixing of 6 amp /230 V AC fan dimmer step type 2 module with cover plateAnchor Ro urban/SSKNV/Havells /Eq.make. |
| 49 | SITC of 150-200 mm dia Sweep metallic Exhaust Fan with ceiling rose of standard make |
| 50 | Supply, Installation, Testing and commissioning of12/15watt LED surface mounted Down lighters incl making of necessary Connections. |
| 51 | SITC of 20 watt LED Flood Lights of standard make (Complete Job) |
| 52 | Suppling and fixing of 8 way horizontal type Single pole and neutral sheet steel,MCB distribution board ,240 V,On surface /recess,complet with neutral bus bar,earth bar,din bar interconnection ,powder painted including earthing etc .as required .(But with out mcb/ Rccb/Isolator ):-Hager /Legrand /ssk/equt .standard |
| 53 | S/F testing and comm..of MCB of the below mentioned capacities in sub main control legrand C curve series 6-25 Amp SP MCB |
| 54 | S/F testing and comm..of MCB of the below mentioned capacities in sub main control legrand C curve series 40Amp DP MCB |
| 55 | Supply ,laying overhead or underground ,testing and commissioning of 16 sqmm Two Core Al cable in conduitof standards make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender