Tender For Repair And Renovation Of Shrine Of Hazrat Ismail Malik, Daryaw Ra At Chittergam
Tender Value
48.61 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
5 days left
EMD
97232
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shopian → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Shrine Of Hazrat Ismail Malik, Daryaw Ra At Chittergam
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing damaged cement concrete manually/ by mechanical means including old damaged chain link fencing and disposal of material within 50 mtr lead as per direction of Engineer-in-Charge. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 3 | Providing and laying of stone soling (hand packed) including watering,dressing and ramming with all carriages loading,unloading and stacking etc. |
| 4 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including cost of material involved complete. |
| 5 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 6 | Centering and shuttering including strutting , proping etc. and removal of form for : foundation, footings, basis of columns etc, for mass concrete. |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 above plinth level upto floor V level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages complete. |
| 8 | Ruled/flush pointing on white sand stone massonary surface with lime surkhi and marble dust mortar in the ratio 1:1½:½ 1 lime: 1½ surkhi (50% red and 50% light yellow surkhi): ½ marble dust ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 9 | Structural steel welded in built up sections trusses and framed work incld cutting,hoisting fixing in positon and applying a priming coat of approved steel primer incl. painting all complete. Welded. |
| 10 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 11 | Providing and laying rough chisel dressed Devri Stone in kerbs, of size 200x200 mm face with chamfer in cement mortar 1: 6 (1 cement : 6 coarse sand) including curing. |
| 12 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed. |
| 13 | Providing and fixing of 75mm dia PVC pipes as weep holes including carriages involved complete. |
| 14 | Supplying and filling of RBM as back filling behind R-Walls with all carrriage etc complete |
| 15 | Providing and fixing of wooden panelling (imported) including 12mm thick ply, polishing, nailing all complete as per directions of Engineer-in-Charge. |
| 16 | Providing and fixing of Khatam Bandi ceiling of First Class Budloo/ Fir Wood including the cost of frame work with 12mm ply board Chaar Gul all complete. |
| 17 | Providing and applying French spirit polishing, two or more coats of new works including a coat of wood filler. |
| 18 | Providing and fixing of 20mm thick ornamental pannels ( Pinjara Kari) heritage work 1.37 lattice work as per approved drawings pattern using first class deodar with all kinds of fittings polishing complete. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second Class kail wood. |
| 20 | Providing and fixing of MS Hold Fasts 50cm long (40 x 5 mm) embedded in cement concrete all carriages complete. |
| 21 | Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First Class Deodar Wood. |
| 22 | Providing and fixing 4mm thick panels of Plain Glass including nails, beadings etc complete. |
| 23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class Deodar Wood. |
| 24 | Antique type wood carving by manual means as directed by EIC |
| 25 | French spirit polishing. Two or more coats on new works including a coat of wood filler. |
| 26 | Providing and fixing of Aluminium Hardware of approved make: |
| 27 | T-Bolts 150 x 100 mm |
| 28 | Ornamental Handles (16'') 400mm |
| 29 | L-Drops 450mm |
| 30 | Supplying and stacking of good earth at site including royalty (earth masured in stacks will be reduced by 20% for payment) |
| 31 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately) with grass turf |
| 32 | Carriage for Different Materials. |
| 33 | Crushed aggregate average lead of 10 Kms |
| 34 | Sand average lead of 15 kms. |
| 35 | Disposal lead of dismantled material average lead of 4 km |
| 36 | Construction of Wuzu Khana |
| 37 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 38 | Providing and laying of stone soling (hand packed) including watering,dressing and ramming with all carriages loading,unloading and stacking etc. |
| 39 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including cost of material involved complete. |
| 40 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. |
| 41 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 42 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete in sub structure and superstructure Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 43 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 44 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages complete. Septic Tank. |
| 45 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in above plinth level upto floor V level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages complete. |
| 46 | Centering and shuttering including strutting , proping etc. and removal of form for : foundation, footings, basis of columns etc, for mass concrete. |
| 47 | Centering and shuttering including strutting , proping etc. and removal of form for : Suspended floors, roofs, landings , balconies and access platforms. |
| 48 | Supplying and filling of RBM in plinth including spreading, dressing, watering with nall carriage etc complete. |
| 49 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported kail wood. |
| 50 | Providing and fixing of MS Hold Fasts 50cm long (40 x 5 mm) embedded in cement concrete all carriages complete. |
| 51 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm thick Kail Wood. |
| 52 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 35mm thick imported kail wood. |
| 53 | Providing and fixing 4mm thick panels of Plain Glass including nails, beadings etc complete. |
| 54 | Providing and fixing 12mm thick pre laminated particle board with decorative lamination on both sides all complete. |
| 55 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 56 | Providing and fixing of Aluminium Hardware of approved make: |
| 57 | T-Bolts 100 x 10 mm |
| 58 | T-Bolts 150 x 10 mm |
| 59 | Handles 100mm |
| 60 | Handles 125mm |
| 61 | L drops |
| 62 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) on Brick Walls all complete |
| 63 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 64 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 65 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 66 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 67 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 68 | Providing and fixing of ceramc glazed wall tiles of first quality confirming to IS: 13753 of maximum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours shade etc laid over 123mm thick cement mortar (1:3) and jointing with grey cement slurry including printing in white cement mixed with pigment matching shade complete. |
| 69 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 70 | Providing and fixing PVC (Prince Make) pipe including cost of rubber washer and adhesive complete. |
| 71 | 100mm size |
| 72 | 75 mm size |
| 73 | Providing and fixing PVC (Prince Make) following fittings complete. |
| 74 | Door Tee 100mm size |
| 75 | PVC Collar 100mm |
| 76 | PVC Reducer 100x75mm |
| 77 | Floor Trap 100 mm size |
| 78 | Plain Bend 100 mm size |
| 79 | Plain Bend 75 mm size |
| 80 | Door bend 100mm |
| 81 | Door bend 75mm class A |
| 82 | PVC Cowel |
| 83 | Door Bend 75 mm size class B |
| 84 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) |
| 85 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 20mm OD(SDR-7.4) |
| 86 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4) |
| 87 | Providing and fixing PPR Unions |
| 88 | 15mm size |
| 89 | 20mm Size |
| 90 | 25mm size |
| 91 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge |
| 92 | Bib Cock |
| 93 | Angle Valve |
| 94 | Basin Mixer |
| 95 | Ball valve |
| 96 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP Brass screws and washers complete. |
| 97 | Providing and fixing PTMT liquid soap container |
| 98 | Floor Trap |
| 99 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden |
| 100 | Providng and Fixing of Geysers 50Litre 2000watt storage water heater (white) including all fittings and fixtures make : venus, jacquar, racold or equivalent. |
| 101 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 102 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including pedistal painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 103 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. (Triple Layer) |
| 104 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) incl. cost of manhole covers PVC ISI mark with frame size ( 1'-6\\" x1'-6\\" x 1'-6\\") inside size |
| 105 | Providing testing commissioning of water mortar 1 Horse power including all fittings complete. |
| 106 | Providing and fixing of RCC Precast rings for soakage pit including lid. |
| 107 | Carriage for Different Materials. |
| 108 | Crushed aggregate average lead of 10 Kms |
| 109 | Sand average lead of 15 kms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender