Tender For Repair And Maintenance Of Dack Banglow At Amini
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Aug 2026
1 days left
EMD
56391
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kavaratti → Lakshadweep
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance Of Dack Banglow At Amini
BOQ
| Sl. No. | Item Description |
| 1 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.(Exterior and interior) |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surfaces mooth including necessary repairs to scratches etc. Complete |
| 3 | Providing and fixing Angle cock of approved quality andmanufacture complete. |
| 4 | ProvidingandfixingC.P.Brass bibcock of approved quality coforming to IS:8931 15mm |
| 5 | ProvidingandfixingC.P.Brass sink tap of approvedquality coforming to IS:8931 |
| 6 | Providing and fixing health faucet of approved quality and manufacture complete |
| 7 | Providinganffixing 600x450mm mirrorofsuperiorglass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. |
| 8 | Providing and fixing C.P. Brass angle valve for wall mixer and geyser points of approved quality coforming to IS :8931 |
| 9 | Providing and fixing C.P. shower rose with 15 to 20mm intlet,150 mm dia |
| 10 | Providing and fixing Flush door shutters confirming to IS:2202 (part.I) decorative type,teek wood planks construction frame of first class teek wood with polished on both faces of shutters |
| 11 | Providing and fixing 30mm thick panelled, glazed or panelled andglazed shutters for doors windo wsandclerestorywindows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent |
| 12 | Providing and fixing Hinges for doors windows and clerestory windows including anodised aluminium butt hinges with necessaryscrews. First class Karimaruthu or equivalent |
| 13 | Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour 600mm long |
| 14 | Providing and fixing geyser of approved quality coforming to IS :8931 6lit |
| 15 | Providing and Fixing Aluminum tower bollt arrangement of approved quality and colour |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C.pan) with100mm sand cast Iron P or S trap,10litr elow level white P.V.C. flushing cistern withmanually controlled device (handle lever) conformingtoIS: 7231,withall fittings and fixtures complete including cutting and making good the walls and floorswherever required : WhiteVitreous china Orissa pattern W.C.panofsize 580x440mm with integral type foot rests. |
| 17 | Providing and fixing water 10litre low level white P.V.C. flushing cistern withmanually controlled device(handle lever) conformingtoIS: 7231,withall fittings and fixtures complete including cutting and making good the walls and floors wherever required : WhiteVitreous china Oriss apattern W.C.panofsize 580x440mm with integral type foot rests. |
| 18 | Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture ) of first quality confirming to IS:15622 of approved make,in colours such as White ,ivory,Grey,Fume red brown,laid on 20 mm thick cement mortar 1:4 ( 1cement, 4 metal sand ) and joining with white cement and matching pigment etc... complete. |
| 19 | Providing and fixing 1st quality ceramic glazedwall tilesconfirming to IS:15622 ( thickness to be specified by themanufacture ) of approvedmake,in all colours ,shades except burgundy ,bottle green,black of any size as approved by engineer-in -charge in skirting, risers of steps and dado over 12mm thick cement mortar1:3(1cement, 3metal sand)andjoining withgrey cement [email protected] kgper sqm, including pointing inwhite cementmixed with pigment ofmatching shade complete |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 21 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 22 | French spirit polishing f on a new work ( two or more coats ) including a coat of wood filler with ready mixed polish of approved brand and manufacture. |
| 23 | Providing and fixing to existingdoor frames. 24mm thick factory made P.V.C. door frame of size 50x47 mm witha UPV Chollo wsection of size 59x24 mm and wall thickness2 mm ± 0.2mm within builtedgingonbothsides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75x220mmhavingwall thickness 1.0mm and stainless steel screws.The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1mm±0.1mmwall thickness. The lockail made up of’H’ section, a UPVC hollow section of size100x2 |
| 24 | Providing and fixing to existing door frames. 25mmthickPVC flush door shutter supto737mm width of colour and shadeas approved by Engineer-in-charge made out of aonepiece Multi chamber extrude d PVC sectionof thesizeof 762mm X 25 mm or lessasper requir ement withanaveragewall thickness of 1mm± 0.3mm. PVC foamend cap of size 23x10mm |
| 25 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls plete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 26 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of sizeSize of Tile 600 x 1200 mm |
| 27 | Painting with synthetic enamel paint of approved brandand manufactur e of required colour to give an even shade Oneor more coats on old work |
| 28 | Providing and fixing100mm Brightfinished brass mortice latch and lockwith 6 levers and a pair of lever handles with necessary screws |
| 29 | Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws |
| 30 | Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws |
| 31 | Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work. 40 mm nominal bore Metre |
| 32 | 25 mm nominal bore Metre |
| 33 | Providing and fixing ZEBRA BLINDS Polyresin Curtain in all fitting approved quality Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender