Tender For Renovation And Development Of Stadium And Park At Jaral Colony Bbmb Pandoh.
Tender Value
26.48 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
20 days left
EMD
53000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Development Of Stadium And Park At Jaral Colony Bbmb Pandoh.
BOQ
| Sl. No. | Item Description |
| 1 | ( STADIUM ) Dismantling asbestos cement, Celotex or other hard board ceiling or partition wall including supporting timber. |
| 2 | Dismantling of 8” thick H.B. Masonry in Cement mortar |
| 3 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth. |
| 4 | Dismantling cement conglomerate floors (25 mm to 50 mm) thick without concrete base. |
| 5 | Scraping(a) White wash and colour wash. |
| 6 | 12.5 mm thick cement plaster 1:5 |
| 7 | Removing door and window (steel or wood) with chowkhat by making necessary recesses in walls when the wall not to be dismantled.(a)door of area 3 sqm and below |
| 8 | Removing door and window (steel or wood) with chowkhat by making necessary recesses in walls when the wall not to be dismantled.(b) Window of area 3 sqm and below |
| 9 | Providing and fixing M.S. Angel iron 40 x 40 x 6mm chowkhat including iron hold fasts, butt hinges fixed in position finished with red lead non setting primer. Complete in all respect (a) for single rebate |
| 10 | Deodar wood door shutter and window shutter including hinges, screw and cords etc. complete fixed in position.(a) Panelled, glazed or glazed and panelled. (i) 40mm thick (Single Leaf) |
| 11 | Wire gauge fixed on steel windows of standard rolled steel section with 3 mm thick flat iron cover molding of 12.5 mm width fixed with machine screw complete in all respect Windows |
| 12 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 13 | Painting two coat with synthetic enamel paints in all shades on wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 14 | Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 15 | Kota stone rough dressed 40mm to 50mm thick slabs, set to pattern in pavements over 20mm thick base of cement mortar (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone. |
| 16 | Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing |
| 17 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: (a) 300mm x 16mm |
| 18 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handles and screw etc. for these fittings. (Excluding sliding bolt) ii) For shutter area above 0.50 sqm |
| 19 | (DEV BHOOMI PARK) Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 20 | Cement concrete 1:4:8 a (i)with stone ballast 20mm gauge |
| 21 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. |
| 22 | Supplying at site of work good quality top soil, free from debris and weeds, from approved site of work with 5 km lead. |
| 23 | Supplying and stacking at site of work well decayed farm yard manure from approved site of work including screening through sieve of I.S. designation 16 mm with 5 km lead. |
| 24 | Supplying of good earth/ soil-less media and/or organic matter, preparation of top-dressing mixture or pot media (b)Screening manure through sieve of I.S. designation 16 mm and mixing with good earth in ratio of 1:2. |
| 25 | Fine grassing including uprooting rank vegetation and weeds by digging the area to a depth of 30 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growth after 10 to 15 days, mixing fertilizer and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, watering, weeding and maintenance for 30 days or till thick lawn is formed.(h) Providing and fixing Neelgiri/ Mexican grass turf with earth 50mm to 60 mm thickness and ramming with required wooden tools, rolling with light roller to make the surface smooth and even. |
| 26 | Maintenance of fine grass lawn for one year including fertilizer application, watering, weeding, top dressing with good earth and manure mixture, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads. |
| 27 | Planting ground covers (ordinary) including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 25cm distance from plant to plant and row to row. |
| 28 | Planting hedge including digging of trench 60 cm wide to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant in two rows. |
| 29 | Maintenance of hedge plants for one year including application of FYM, fertilizer, insecticides, pruning and casualty replacement |
| 30 | Supply and installation of garden bench Chair type garden bench with L-shaped sides made of reinforced concrete (M-30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation |
| 31 | ( GANESH PARK ) Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 32 | Cement concrete 1:4:8a (i) with stone ballast 20mm gauge |
| 33 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over andincluding 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. |
| 34 | Supplying at site of work good quality top soil, free from debris and weeds, from approved site of work with 5 km lead. |
| 35 | Supplying and stacking at site of work well decayed farm yard manure from approved site of work including screening through sieve of I.S. designation 16 mm with 5 km lead. |
| 36 | Supplying of good earth/ soil-less media and/or organic matter, preparation of top dressing mixture or pot media (b)Screening manure through sieve of I.S. designation 16 mm and mixing with good earth in ratio of 1:2. |
| 37 | Fine grassing including uprooting rank vegetation and weeds by digging the area to a depth of 30 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growth after 10 to 15 days, mixing fertilizer and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, watering, weeding and maintenance for 30 days or till thick lawn is formed. (h) Providing and fixing Neelgiri/ Mexican grass turf with earth 50mm to 60 mm thickness and ramming with required wooden tools, rolling with light roller to make the surface smooth and even. |
| 38 | Maintenance of fine grass lawn for one year including fertilizer application, watering, weeding, top dressing with good earth and manure mixture, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads. |
| 39 | Planting ground covers (ordinary) including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 25cm distance from plant to plant and row to row. |
| 40 | Planting hedge including digging of trench 60 cm wide to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant in two rows. |
| 41 | Maintenance of hedge plants for one year including application of FYM, fertilizer, insecticides, pruning and casualty replacement |
| 42 | Supply and installation of garden bench(a) Chair type garden bench with L-shaped sides made of reinforced concrete (M- 30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation |
| 43 | ( GAZEBO ) Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 44 | Cement concrete 1:4:8 with stone ballast 20mm gauge |
| 45 | Cement concrete 1:2:4 (a i) Mixing with manual means |
| 46 | Random rubble masonry or polygonal rubble masonry (Kentish Rag) or random or polygonal rubble built to courses in foundations and plinth in cement mortar 1:6 |
| 47 | Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special(a)shaped washers etc. complete having span: - up to 15.00 mtr span |
| 48 | Providing and fixing (PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti capillary groove and return leg. The steel sheet must be having yield strength of 550 MPa (Fy = 550 MPa) metallic coated with Zinc- Aluminium alloy (i.e. 55% Al,43.4%Zinc, 1.6% Si-Zincalume) AZ150 (Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. b.) 0.60mm(+0.05%) thick |
| 49 | Ridges and valleys 45 cm overall, in plain G.I. Sheet 0.80mm fixed with galvanized iron J. and Hooks 10mm diameter, G.I. Limpet and bitumen washers complete |
| 50 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 51 | Painting two or more coats with aluminium paint to give an even shade excluding priming coat |
| 52 | Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, CherryRed, Elite Brown, Cat Eye or equivalent. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender