Tender For Construction Of Double Storey Sdo Op Office Building For Sdo City Ratia And Sdo S/U Ratia Under Op Circle Dhbvn Fatehabad.
Tender Value
3.23 Crore
Estimated cost
Bid Submission
06 Aug 2026
5 days left
EMD
6.47 Lakhs
Bank guarantee accepted
Document Fee
4900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fatehabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Double Storey Sdo Op Office Building For Sdo City Ratia And Sdo S/U Ratia Under Op Circle Dhbvn Fatehabad.
BOQ
| Sl. No. | Item Description |
| 1 | providing,supplying ,installing ,commissioning and testing non self priming, multistage ,horizontal,centrifugal pumping set (2BHP MONOBLOCK BOOST PUMP) with electric controller and auto cutoff switch complete in all respect (discharge-450 LPN,HEAD-20 METRE) |
| 2 | S/E OF LED 10 WATT RECTANGULAR BULK HEAD FITTING WITH OPAL DIFFUSAR and 10 WATT LED I/C ERECTION OF FITTING IN WALL/CEILING AND MAKING NECESSARY CONNECTION TO COMPLETE THE JOB (MAKE :-HAVELLS/MODEL-ENDURARUGBY LED BULKHEAD WITH CAT NO WT202W LED65NW PSUS2 PC |
| 3 | 1 NOS. 125A 4P mccb with built in thermal magnetic release (Ics = Icu = 25ka) with in built O/L , S/C and E/F protection as per specification and each with following accessories, 1 set of R,Y,B Phase indication lamps with control mcb as per fault requirement for each incomer. Busbars 3nos. SPN copper insulated bus bars link of minimum of 160 amps, outgoings= 1nos. 25A FP MCB, 2NOS. 40A FP MCB, 1NOS. 63A FP MCB, 1 NOS. 6-32A, DP MCB 10 KA `C` CURVE. |
| 4 | Providing and fixing heavy class SS grating of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for FD, FT and UT, Chilly make cat no. CCT-R-101 etc. |
| 5 | PROVIDING AND FIXING SQUARE - MOUTH PVC GULLY TRAP OF SIZE 160 X 110 MM COMPLETE WITH BRICK MASONRY CHAMBER WITH WATER TIGHT C.I. COVER WITH FRAME OF 300X300 MM SIZE (INSIDE) THE WEIGHT OF COVER TO BE NOT LESS THAN 4.50 KG AND FRAME TO BE NOT LESS THAN 2 |
| 6 | PROVIDING AND FIXING IN POSITION UPVC SWR SPECIALS FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 INCLUDING CUTTING, JOINTING WITH APPROVE SOLVENT , RUBBER RING ETC AND OTHER ACCESSORIES INCLUDING CEMENT COMPO FOR 110MM O/D PIPE LINE (PLAIN BEND) ETC |
| 7 | PROVIDING AND FIXING IN POSITION UPVC SWR SPECIALS FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 INCLUDING CUTTING, JOINTING WITH APPROVE SOLVENT , RUBBER RING ETC AND OTHER ACCESSORIES INCLUDING CEMENT COMPO FOR 110MM O/D PIPE LINE (P-TRAP) ETC |
| 8 | PROVIDING AND FIXING IN POSITION UPVC SWR SPECIALS FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 INCLUDING CUTTING, JOINTING WITH APPROVE SOLVENT , RUBBER RING ETC AND OTHER ACCESSORIES INCLUDING CEMENT COMPO FOR 110MM O/D PIPE LINE (CLEAN OUT) etc |
| 9 | PROVIDING AND FIXING UPVC FLOOR TRAP FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 AND IS-14735 INCLUDING CUTTING, WASTAGE ETC AND CUTTING HOLES IN WALLS ROOFS OR FLOORS ETC AND MAKING GOOD IN ORIGIN. etc |
| 10 | S/E of LED 12W LED downlighter DN296B LED12S-6500 PSU WH square/ round surface recess mounting white colour of Phillips make working hour minimum 35000 hours, operation on single phase AC supply complete in all respect upto he entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.. |
| 11 | Supply and erection of Concealed light CAT No. DN092B LED10S-6500 PSU WH of Philips Make and all petty materials required to complete the job in all respects of Philips / Wipro / Bajaj make as approved by the Engineer in charge. ETC |
| 12 | Supply and Erection of surface mounting LED Batten fitting 1 x 18/20 watt (4 feet long ),CAT NO. BN021LED 125 6500 PSU GR HSN CODE 9405 white colour of Phillip make, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc... |
| 13 | Extra Cost for Glass Door Accessories i.e Pull Handle TGDIH ( 25mm dia X 450mm long ) H-Type Pull handle back to back with 350mm CTC, adjustable fixing for glass ,Length =450mm, 25mm dia, -SS304 Finish: mill , . spindle and cover plate ,US 10 Std. Corner lock plus Strike plate and EPC. As per DIN EN 1154.(500,000 cyle tested ) , Finish: Satin stainless steel. Floor stop half dome with 45mm dia with fixing accessories, in satin Chrome ,Final certifications of products should be submitted be from the product manufacturer for the originality of the product and manufacturer should be have its own service team . The above work complete in all respect as per approved drawings and to the satisfaction of Architect /Engineer-in-Charge. |
| 14 | Providing and fixing of approved make translucent, cast PVC, self - adhesive vinyl, special CRYSTAL-effect film to reproduce Sand - blasting effect on glass at required locations as per the direction of Engineer-In-Charge complete.a) Plain Frosted film |
| 15 | PROVIDING AND FIXING SATINLESS STEEL HANGING FLOOR DOOR STOPPER TWIN RUBBER STOPPER |
| 16 | PROVIDING AND FIXING 304 GRADE STAINLES STEEL HSLIDING BOLT ROD DIA 16 MMSIZE 300MMX16 MM |
| 17 | PROVIDING AND FIXING 304 GRADE STAINLESS STEEL SLIDING BOLT DIA 16 MM WITH NUTS SIZE 250MM X16 MM |
| 18 | PROVIDING AND FIXING MATT FINSIH STAINLESS STEEL TOWER BOLT ISI MARKED ,WITH NECESSARY SCREWS 150 MM X10 MM |
| 19 | PROVIDING AND FIXING MATT FINISH STAINLESS STEEL TOWER BOLT SIZE 300 MM X10 MM |
| 20 | PROVIDING AND FIXING SS TOWEL RING CAT NO AQN-7721 |
| 21 | PROVIDING AND FIXING SOAP DISPENSER WITH GLASS BOTTLE CAT NO ACN-1135N |
| 22 | Providing and applying at all floors, heights and locations exterior based texture of heritage/spectrum make made from natural stone based materials and bonding agent made from pure acrylic co-polymer emulsion, Broad fungicide and Bonding agent mixed to a recommended quantity of water and applied with a trowels on to the surface, to be finished, in an average uniform coat of 2mm covering an area of about 0.5 sqm/kg of the mix. giving a uniform surface texture applied by a trained flakes applicators in a single coat. The finish shall be anti fading and non pigmented type with resistance to weathering. |
| 23 | Providing and fixing in position UPVC SWR specials for soil waste vent or anti syphonage pipes (Supreme or approved equivalent ) as per IS -13592 including cutting and jointing with approved solvent as per the direction of Engineer incharge - H.R.B. |
| 24 | Providing and fixing urinal partitions of standard dimensions made of 10mm thick toughened frosted Glass, scratch and impact resistant. The urinal partitions shall be fixed on walls with right angle brackets in stainless steel of grade SS 304 with necessary fittings (Jaguar Cat no.-JSE-CHR-810US450X or approved equivalent) a) Urinal partition of size 900mm X 450mm |
| 25 | PROVIDING AND FIXING IN POSITION HINDWARE/Kohler/Jaguar MAKE Star white Viterous Chinaware Urinal of Hindware having in compatibility with Cat no.- URS-WHT-13261 of Hindware (Jaguar/Parryware) with stainless Steel flush pipe, spreads, domed waste coupler and concealed urinal self closing cock having in compatibility with Cat no.F310003ACP of Hindware(Jaguar/Kohlar) and PVC waste pipe etc. with all OTHER NECESSARY Fittings and making good the walls and floor. |
| 26 | Supply and Fixing of Glass partition of 12mm Toughened Glass slim line system Frames clip in profile to a height of maximum 3000mm or as per drawing. The Fixed glass to be fixed using BP45 Profiles at top and bottom and fixed frame cleat. The profile size to be 45x25mm to be fixed on to the floor/ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L junction profiles and T Junction profiles necessary as per design. In case of Glass overall panel MP45 and BP45 overpanel profile to be used. Door frame with alexa EP End profile frame of size 45x50mm with seals suitable for Glass Door Patch Fitting with Top and Bottom patch having standard L=3000mm suitable for double action glass door. The clip in profiles shall be suitable for glass thickness 12 mm |
| 27 | Supplying, errection, testing and commissioning of 2BHP motor monoblock water pump set with complete fittings etc. |
| 28 | S/E of LED Panel of 36W surface/ recess mounting size 2`x2` of Philips make with energy efficient white colour as per satisfaction of Engineer in charge. |
| 29 | Providing and Fixing of white viterous chinaware under counter wash basin Size: 590x430x215 mm with auto closing pillar cock, CP brass waste assembly, wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge. |
| 30 | Providing and fixing 6mm thick extra clear bevelled edge mirror fixed on walls with stainless steel studs of appropriate size and dia at four corners of glass and 6mm thick waterproof ply/sheet backing complete as per direction of the Engineer-In- Charge. |
| 31 | Item Description |
| 32 | DNIT for the work :- Construction of combined SDO office building for SDO City Ratia and SDO Sub-Urban Ratia (Fatehabad) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender