Tender For Repair To Fencing, Compound Wall, Drains, Culverts, Hard Standing And Pathway In Area B1 & B2 Of Age B/R-Ii Under Ge(West) Jrc
Tender Value
45 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Fencing, Compound Wall, Drains, Culverts, Hard Standing And Pathway In Area B1 & B2 Of Age B/R-Ii Under Ge(West) Jrc
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc, but excluding ashlar facings complete all as specified and directed. |
| 2 | Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed. |
| 3 | M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks. |
| 4 | M&L for brick work in half brick thick walls built in cement mortar (1:4) using sub class ‘B’ old size bricks, straight or curved on plan to any radius complete all as specified. |
| 5 | Dismantling Bricks (laid Flat in Floor or laid on Side Walls of Brick Drains, Channels), etc., Bricks laid, bedded and pointed in any Cement Mortar, complete all as specified and as directed. |
| 6 | M&L Brick Work with old size Sub-Class ‘B’ Bricks, laid Flat in Floor of Drains, Bedded and Jointed in Cement Mortar 1:6 and Pointed in Cement Mortar 1:3, complete all as specified and as directed. |
| 7 | M&L Brick Work with old size Sub-Class ‘B’ Bricks, laid on Edge as Side Walls of Brick Drains in Slope, Bedded and Jointed in Cement Mortar 1:6 and Pointed in Cement Mortar 1:3, complete all as specified and as directed. |
| 8 | M&L Cement Concrete 1:2:4 (20mm graded aggregate) in Channels, etc. in Manhole including necessary Formwork (if required), complete all as specified and as directed. |
| 9 | M&L Extra forming Fair Finished to Drains or Channels 30 Cm Inner Girth in Cement Concrete using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc, complete all as specified and as directed. |
| 10 | Add to or Deduct from Item here-in-before for Every 25mm Girth or Part thereof Over or Under 30 Cm, complete all as specified and as directed. |
| 11 | S&F 35 mm thick Precast cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) designer Jafri Wall Jallie as per sample, area of each not exc 0.50 Sqm fixed on wall in cement mortar 1:4,fixed in repairs complete all as specified and directed. |
| 12 | S&F Precast reinforced cement concrete 1:2:4, type B-1 (Using 20mm graded stone aggregate )designer pillars of size 100mm X 100mm and 900mm long including all mouldings but excluding frame set in cement mortar (1:4) etc, including two coats of cement base paint, fixed in repairs complete all as specified and directed. |
| 13 | M&L for Plain Cement Concrete Type B0 1:2:4 using 12.5 mm graded aggregate as in Coping, benching etc including weathering slightly rounded or chamfered angles and throuting , including necessary form work etc all as specified. |
| 14 | Supply and fixing 2mm thick fiber glass reinforced translucent plain sheeting fixed with bolts coach screws and washers with steel framed gate, walls and fencing etc complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 16 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/ loose soil. |
| 17 | Removal of surplus soil not exceeding 50m and deposting where directed at a level not exceeding 1.5cm above the starting point. |
| 18 | M&L Broken stone or boulders as in hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered, rammed to a true surface etc complete all as specified and directed. |
| 19 | M&L for cement concrete type D2, 1:4:8 (40mm graded aggregate) as in foundations, filling, mass concrete/ base to interlock tile/Chequered tile etc, complete all as specified and directed. |
| 20 | M & L for 25mm thick Sand coushening under paver block complete all as specified and directed. |
| 21 | M&L machine pressed precast coloured with pigment concrete interlocking paver blocks any shape and size confirming of IS 15658: 2006 of 60mm thick , M-35 laid and jointed with grey cement and pigment complete all as specified. |
| 22 | M & L chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6,complete all as specified. |
| 23 | M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in kerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work. |
| 24 | Providing precast cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregates) set in cement mortar 1:4, as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, kerb stone/apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throating etc. and setting in mortar complete with joints to match, complete all as specified and directed. |
| 25 | M&L for preparation of newly concrete surfaces of any description over 10cm girth or width and applying two coats of weather coat exterior emulsion paint of first quality of any colourover one priming coat complete all as specified and directed. |
| 26 | M&L for preparation of old painted concrete surfaces of any description over 10cm girth or width and applying one coats of weather coat exterior emulsion paint of first quality of any colour, complete all as specified and as directed. |
| 27 | Taking down cement or cement lime plaster any description on brick walls etc. including racking out joints hacking for keys scrubbing down with water. |
| 28 | M&L rendering 15 mm thick in CM 1:4 on brick work using wpc including finishing the surface fair and even without using extra cement. |
| 29 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 30 | M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats. |
| 31 | M & L for water based premium acrylic smooth exterior emulsion of approved colour witgh silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.80 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.Make :-(Apex Ultima of asian,Weather coat cell guard of Berger,Excel total of Nerolac or equivalent) |
| 32 | M&L for prepration of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 33 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 34 | M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 35 | All as per Ser item No 34.00 herein before but including ornamental and intricate design, complete all as specified and directed. |
| 36 | Material & Labour for providing and fixing stainless steel (Grade 304) for sliding Gate/railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 37 | Demolition of cement concrete (reinforced) of any description for all as specified and directed. |
| 38 | M&L precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for drain well etc set in cement mortar 1:6 including necessary form work complete all as specified and directed. |
| 39 | Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 40 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves, landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed. |
| 41 | S&F TMT steel bars 10 mm dia and above cut to length bent to shape, required including cranking benchings spirally hooping for colums hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia complete all as specified and directed. |
| 42 | Mild steel TMT bars 5mm dia over and upto 10mm as in stirrups for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 43 | M&L 20mm thick Granite (of any type) tiles machine cut, as wall cladding laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and dismantling of old existing stones etc complete all as specified |
| 44 | Dismantling fencing post or struts(RCC) any section including taking out embedded portion and making good the distrubed ground on (embedded in concrete). |
| 45 | Dismantling fencing wire of any description and type. |
| 46 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm watering and removing surplus soil to distance n. exc 50m and making good surfaces in soft/loose soil. |
| 47 | M&L for cement concrete type C2 (1:3:6) in foundations, filling and mass concrete using 40mm graded stone aggregates. |
| 48 | S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting ie; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 49 | Supply only GI chain link fencing of any size or type, complete all as specified and directed. |
| 50 | Fixing only GI chain link fencing of any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed. |
| 51 | S & F mild steel screw bolts (machine made) with hexagonal or Square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exceeding 5 cm but not exceeding 10 cm long, dia of shank 11 to 15 mm, complete all as specified and directed. |
| 52 | M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to, complete all as specified and directed. |
| 53 | S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm barbs at 75 mm spacing and straining and fixing to posts of any type including securing or tying at crossing with and provision of GI wire staples or steel pins etc complete all as specified and directed. |
| 54 | M&L for concertina coil of 600mm dia on vertical double horn fencing complete all as specified and directed |
| 55 | Material & Labour two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of new steel surfaces complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender