Tender For Repairing And Rewinding Work Of Centrifugal / Mono Block Pump Sets Under Phed Division : Sikar (Rate Shall Be Considered Inclusive 18% Gst )
Tender Value
10 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
5 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sikar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Rewinding Work Of Centrifugal / Mono Block Pump Sets Under Phed Division : Sikar (Rate Shall Be Considered Inclusive 18% Gst )
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding of three phase squirrel cage induction motor of Mono block pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. |
| 2 | 7.5 HP |
| 3 | 10.00 HP |
| 4 | 12.5 HP |
| 5 | 15.00 HP |
| 6 | SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP) |
| 7 | Connection Plates |
| 8 | up to 10 HP |
| 9 | 10 HP to 20 HP |
| 10 | Cooling Fan |
| 11 | up to 10 HP |
| 12 | 10 HP to 20 HP |
| 13 | GM/SS bush |
| 14 | Up to 10 HP |
| 15 | 10 HP to 20 HP |
| 16 | Oil seal |
| 17 | Upto 10 HP |
| 18 | 10 HP to 20 HP |
| 19 | Labour charge for opening and fitting of pump sets |
| 20 | Upto 10 HP |
| 21 | 10 HP to 20 HP |
| 22 | Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (Including cost of copper wire) 'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump sets and transportation to and fro from installation site complete as per direction of engineer in charge at site. |
| 23 | Above 15.00 HP but upto 17.50 HP |
| 24 | Above 17.50 HP but upto 20.00 HP |
| 25 | Above 20.00 HP but upto 25.00 HP |
| 26 | Above 25.00 HP but upto 30.00 HP |
| 27 | Above 30.00 HP but upto 35.00 HP |
| 28 | Above 35.00 HP but upto 40.00 HP |
| 29 | Above 40.00 HP but upto 45.00 HP |
| 30 | Above 45.00 HP but upto 50.00 HP |
| 31 | SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP) |
| 32 | Connection Plates |
| 33 | 5 HP to 20 HP |
| 34 | 20 HP to 30 HP |
| 35 | 30 HP to 50 HP |
| 36 | Cooling Fan |
| 37 | 5 HP to 20 HP |
| 38 | 20 HP to 30 HP |
| 39 | 30 HP to 50 HP |
| 40 | Fan Cover |
| 41 | 5 HP to 20 HP |
| 42 | 20 HP to 30 HP |
| 43 | 30 HP to 50 HP |
| 44 | G.M./SS Gland Guide Bush |
| 45 | 5 HP to 20 HP |
| 46 | 20 HP to 30 HP |
| 47 | 30 HP to 50 HP |
| 48 | Shaft Chuck Nut |
| 49 | 5 HP to 20 HP |
| 50 | 20 HP to 30 HP |
| 51 | 30 HP to 50 HP |
| 52 | G.M. Neck Ring |
| 53 | 5 HP to 20 HP |
| 54 | 20 HP to 30 HP |
| 55 | 30 HP to 50 HP |
| 56 | Bush Shaft Sleeve of G.M. |
| 57 | 5 HP to 20 HP |
| 58 | 20 HP to 30 HP |
| 59 | 30 HP to 50 HP |
| 60 | S.S. Shaft (Non Magnetic) |
| 61 | 5 HP to 20 HP |
| 62 | 20 HP to 30 HP |
| 63 | 30 HP to 50 HP |
| 64 | AIR Cock |
| 65 | 5 HP to 20 HP |
| 66 | 20 HP to 30 HP |
| 67 | 30 HP to 50 HP |
| 68 | JOB WORK FOR REPAIR OF PUMP MOTOR |
| 69 | Bearing Cap (rebuilding, turning & finishing) |
| 70 | 5 HP to 20 HP |
| 71 | 20 HP to 30 HP |
| 72 | 30 HP to 50 HP |
| 73 | Labour Charges for Dismantling & Assembling of Pump |
| 74 | 5 HP to 20 HP |
| 75 | 20 HP to 30 HP |
| 76 | 30 HP to 50 HP |
| 77 | Coupling with stud and rubber bush |
| 78 | 5 HP to 20 HP |
| 79 | 20 HP to 30 HP |
| 80 | 30 HP to 50 HP |
| 81 | Supply & Fixing of tyre coupling sets according to relevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge. |
| 82 | Type 14 Nos. set |
| 83 | Type 15 Nos. set |
| 84 | Type 16 Nos. set |
| 85 | Type 17 Nos. set |
| 86 | Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC. |
| 87 | 6304 or equivalent size |
| 88 | 6305 or equivalent size |
| 89 | 6306 or equivalent size |
| 90 | 6307 or equivalent size |
| 91 | 6308 or equivalent size |
| 92 | 6309 or equivalent size |
| 93 | 6310 or equivalent size |
| 94 | 6311 or equivalent size |
| 95 | 6312 or equivalent size |
| 96 | Routine maintenance of centrifugal coupled pump and motor including opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, base plate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job |
| 97 | 5 HP to 20 HP |
| 98 | 20 HP to 30 HP |
| 99 | Above 30 HP and up to 50 HP |
| 100 | Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job. |
| 101 | 5 HP to 20 HP |
| 102 | Above 20 HP and up to 30 HP |
| 103 | Above 30 HP and up to 50 HP |
| 104 | Above 50 HP and up to 100 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender