Tender For Provn Of Classrooms With Mob Eqpt Store, Sports Store & Wpn Trg Aid Store At Cmp Centre & School Bangalore.
Tender Value
2.38 Crore
Estimated cost
Bid Submission
18 Aug 2026
0 days left
EMD
3.13 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Classrooms With Mob Eqpt Store, Sports Store & Wpn Trg Aid Store At Cmp Centre & School Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART I (BUILDING & STRUCTURE)is not prepriced by MES and prepriced rates indicating 0.00 under col 5 signifies this fact only. Bidders shall insert their rates in Green field under Col 6 |
| 2 | Construction of bldg for classrooms, mob equipment store, sports store, and Wpn Trg Aid store with ancillaries (G+1) with RCC framed structure (M25 design mix) (G+1) with Permanent specification in double story with RCC framed structure, (M25 design mix) Pre construction ATT, Mosquito proofing, pressed steel window, factory made aluminium door shutter in joinery, vitrified tiles in flooring of classrooms, common area, corridor and staffroom, PCC flooring in store, sadarahalli stone in staircase, steps, mumty, and ceramic tiles in toilets, internal /external plastering and OBD on internal surface finish in all portion except toilet and verandah, external emulsion paint in external surface finishes, PCC block masonary,WPT with APP membrane on roof treatment in non accessable roof and terracotta tiles on accessable roof over App membrane etc complete all as specified and directed (listed in Schedule ‘A’ Part-I) |
| 3 | GENERAL SUMMARY SCHEDULE 'A' PART II to XI Note: Sch A Part II to XI are under ser No. 2.01 to 2.10 are prepriced by MES. Bidders shall insert their lump sum, amount in the Green field under Col 6 only. |
| 4 | Lumpsum price worked out by the tenderer for SITE CLEARANCE as listed in Schedule ‘A’ Part-II |
| 5 | Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III |
| 6 | Lumpsum price worked out by the tenderer for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-IV |
| 7 | Lumpsum price worked out by the tenderer for ROAD/PATH/CULVERT as listed in Schedule ‘A’ Part-V |
| 8 | Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VI |
| 9 | Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VII |
| 10 | Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VIII |
| 11 | Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-IX |
| 12 | Lumpsum price worked out by the tenderer for as listed in Schedule ‘A’ COOLING APPLIANCES Part-X |
| 13 | Lumpsum price worked out by the tenderer for as listed in Schedule ‘A’ DEMOLITION/DISMANTLING Part-XI |
| 14 | SCHEDULE 'A' PART XII (MISCELLANEOUS ITEMS)is not prepriced by MES and prepriced rates indicating 0.00 under col 5 signifies this fact only. Bidders shall insert their rates in Green field under Col 6 |
| 15 | INTERNAL WATER SUPPLY |
| 16 | S&F in quarter turn Bib tap cast copper alloy 15mm fancy type, Chromium plated screwed down, high pressure, screwed down for iron pipe complete all as speified and as directed. |
| 17 | S&F 15 mm bore brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule complete all as speified and as directed. |
| 18 | S&F 15mm dia quarter turn swan neck pillar tap for WHB brass fancy type, chromium plated complete all as specified and as directed. |
| 19 | S&F angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and as directed. |
| 20 | S&F SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 21 | INTERNAL ELECTRIFICATION |
| 22 | Supply and fix of ceiling fan 1200mm sweep with BLDC electric motor having star rated service wire 6.0 cubic meter per minute /watt, single phase with operating voltage range 140 to 285 volts BEE 5 star rated including mounting arrangement , 3 core flexible copper conductor cable up to ceiling rose , down rod suitable size length etc complete all as specified and as directed. |
| 23 | EXTERNAL ELECTRIC SUPPLY |
| 24 | Supply and laying sub class sub class B burnt old size bricks for cable protection as per para 19.75 of SSR Part-I complete as specified and as directed. |
| 25 | Fabricate, Supply, testing, commissioning for Feeder pillar box outdoor type made of Aluminium bus bar of 200A capacity for one incoming cable and 63 Amps MCCB FP 415 Volts 16 KA as outgoing and 4 out going cable housing in sheet metal enclosure of MS sheet 3.15mm thick, CRCA sheet, angle iron frame of size 40x40x6mm including locking arrangement & painting with two coats of powder coated paint over a coat of metal primer, suitable foundation & platform etc complete all as specified and as directed |
| 26 | Supply and fixing in replacement LT Panel board outdoor type fabricated out of 3.15mm thick CRCA Sheet steel with width of panel not less than 0.70 mtrs, breath not less than 1.5 mtr, factory made vermin proof duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer or powder coated, double door, water proof dust and vermin proof hinged and lockable doors inlcuding rain protection cover on top and complete with interconnections, with copper wires, tapes, opening from both sides with cable entry from bottom, with cable alley and bus bar chamber, bonding to earth and painting, including angle iron frame of size minimum 40x40x6mm having 4 legs 0.60 mtr long including grouting in PCC 1:4:8, to the reqd depth including below mentioned items/accessories inside the LT Panel complete all as specified and as directed. ( Main LT panel) (i) Aluminium bus bar 3 phase & neutral of capacity 100 Amps |
| 27 | (ii) MCCB 4 Pole 63 Amps 16 KA adjustable type-01 No ( Incoming)(iii) MCCB 4 Pole 32 Amps 16 KA adjustable type-02 No (iv) MCB 4 Pole 20 Amps -01 No (v) LED timer for buldg security Light -01 Nos(vi) LED phase indication lamp for 3 phase-01 No |
| 28 | SEWAGE DISPOSAL |
| 29 | Supply and laying 200mm internal dia DWCPE SN-8 pipes confirming to IS-14930 part-2/IS 16025 Part-24,laying including all necessary specials, cutting and jointing as specified and as directed |
| 30 | COOLING APPLIANCES |
| 31 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender