Tender For General-Thalassery Municipality -Project No-S0557/26 Constructing A Shopping Complex At Manjodi In Ward 17-Fire Protection System-Electrical Fire Fighting Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Aug 2026
6 days left
EMD
19035
Bank guarantee accepted
Document Fee
1680
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Thalassery Municipality -Project No-S0557/26 Constructing A Shopping Complex At Manjodi In Ward 17-Fire Protection System-Electrical Fire Fighting Work
BOQ
| Sl. No. | Item Description |
| 1 | Providing Fire & Safety arrangements |
| 2 | OD460328/2025-2026:Supplying, installation, testing and commissioning of electric driven terrace pump suitable forautomatic operation and consisting of following, complete in all respects, as required: (TerracePump)a.Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impellerwith stainless steel shaft, mechanical confirming to IS : 1520b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mountedtype with Class-'F' insulation, conforming to IS-325.c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.asrequired.d. Suitable cement concrete foundation duly plastered and with anti vibration pads.900 lpm at 35 m Head |
| 3 | OD75741/2025-2026:Fabrication, supply, conveyance , testing and commissioning of fire fighting motor control panel suitable for 900 lpm 35 mtr head pump set for Auto Manuel operation including appropriate capacity MCB , contactor, overload relay, ONN/OFF illuminating push button with necessary addon NO/NC contacts and elements ,3 phase volt meter with selector switch , phase indication lamps with necessary back up fuse protection etc. complete as per Fire and Rescue Department standards. |
| 4 | OD75745/2025-2026:Supply and fixing of Pressure gauge with all necessary accessories. Make: H-Guru/Waaree or equivalent |
| 5 | OD460379/2025-2026:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required |
| 6 | OD460404/2025-2026:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasketsetc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting withtwo or more coats of synthetic enamel paint of required shade complete as required :100 mm dia |
| 7 | 18.11.5:Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze or gun metal seat duly ISI marked complete with nuts, bolts ,washers ,gaskets conforming to IS 13095 of following sizes as required:100 mm dia |
| 8 | 18.14.5:Providing,installation,testing and commissioning of non-return valve of following sizes conforming to IS :5312 complete with rubber gasket, GI bolts , nuts, washers etc as required.100 mm dia |
| 9 | 18.9.1:Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal or stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290(Type A) with blank Gun metal or Stainless steel cap and chain as required:Single headed Gunmetal |
| 10 | 18.18.1:Supplying and fixing 63 mm dia gun etal short metal branch pipe ith 20 mm nominal interanal diameter size nozzle conforming to IS 903 suitable for Instantaneous connection to Interconnect hose pipe coupling as required:Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: |
| 11 | 18.17.1:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a) 20 mm nominal Internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585b) 20 mm nominal internal dia gun metal globe valve &nozzlec) Drum and brackets for fixing the equipments on wall.d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m |
| 12 | 18.16.1:Supplying and fixing 63 m dia,15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required: Gun Metal |
| 13 | OD75744/2025-2026:Supply and fixing of hose box with double-hinged door with glass front arrangements including PO red painting. flanges, nuts, rubber gaskets and bolts complete - Double hose box . Make : Friends/Capitalgains /equivalent make |
| 14 | OD75742/2025-2026:Supply, installation, testing and commissioning of fire extinguishers of capacity 6Kg ABC type complete. With ISI Mark as per IS:15683 . Make : Safepro / Safex |
| 15 | OD75740/2025-2026:Supply, installation, testing and commissioning of fire extinguishers of capacity 5Kg CO2 type complete. With ISI Mark as per IS:15683 . Make : Safepro / Safex |
| 16 | 90.6.4.53:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 3 Run |
| 17 | 90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm |
| 18 | 90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 19 | 90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size |
| 20 | 90.12.24.4:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm |
| 21 | 9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 22 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 23 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 24 | OD75739/2025-2026:Supply and fixing 60 mm long x 12 mm wide x 1 mm thick Copperearthing clips for 4 sq mm to 16 sq mm. single compression glands |
| 25 | OD75746/2025-2026:Supply and fixing 25x6 mm brass bolt, nut and washer |
| 26 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N |
| 27 | 18.19.1:Supplying and fixing fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia M.S. Pipe connection conforming to IS 904 as required:2 way-100 mm dia M.S.Pipe |
| 28 | 18.10.1:Supplying and fixing single headed external yard hydrant valve with one no: 63 mm dia instantaneous FM Gun metal or stainless steel coupling and cast iron wheel, ISI marked ISI marked conforming to IS 5290(Type A) with blank Gun metal or Stainless steel cap and chain as required:Single headed Gunmetal |
| 29 | OD75749/2025-2026:Supply,installation,testing and commissioning of Fire Exist/Fire Cabinet/Fire Extingui/Directional etc.Signage |
| 30 | OD75748/2025-2026:Core cutting and hole packing using GP2 conbextra for 100 mm dia pipe |
| 31 | OD75753/2025-2026:Supply and wrapping with Tarfelt (4 mm Thickness) materials for under ground pipes |
| 32 | OD75754/2025-2026:Supply,installation,testing and commissioning of Brass Air release Valve,25 mm dia with necessary coupling to be fitted on top of wet riser |
| 33 | OD75755/2025-2026:Supply conveyance and providing 40 mm hose niple |
| 34 | OD75752/2025-2026:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement,Trenching, refilling and testing of joints complete as per directions of Engineers in charge-40 mm dia 10 Kgf /cm2. |
| 35 | OD75751/2025-2026:Supplying, laying and jointing of the following 40 mm sizes pipes made out of HDPE conforming to IS with all required accessories in ground in the existing trench. |
| 36 | OD75747/2025-2026:Supply conveyance and fixing 40 mm Cast iron Non return/Check valve in the proposed location. |
| 37 | OD75750/2025-2026:Supply conveyance installation testing and commissioning of 2HP,3 phase submersible pump motor(Kirlosker make model no.KOS 235M or equivalent make)Stainless steel shaft cast iron/ stainless steel case 2880 RPM, 12-30 Meter head 720-15840 LPH delivery in the existing open well and trial run etc.as required. |
| 38 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 39 | OD75756/2025-2026:Supply conveyance and providing 12 mm nylon rope. |
| 40 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm |
| 41 | 18.23.1:Providing and fixing of flow switch in MS pipe including connection etc as required:100 mm dia |
| 42 | OD75743/2025-2026:Preparation of drawings/ schemes/ documents and getting final approval/ sanction/ NOC from Kerala Fire Force Department as per rules and regulations (Only statutory fees will be borne by the owner/Department ). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender