Tender For Construction Of New Tahasil Office Building At Hatadihi In The District Of Keonjhar For The Year 2025-26.
Tender Value
3.76 Crore
Estimated cost
Bid Submission
10 Aug 2026
11 days left
EMD
3.76 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Tahasil Office Building At Hatadihi In The District Of Keonjhar For The Year 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKSEarth work excavation in foundation in all kinds of soil within 50 m initial lead & 1.5 m initial lift including rough dressing & breaking clods to maximum 5 cm to 7 cm & laying in layers not exceeding 0.3 m in depth & as per the direction of the Engineer-in-charge. |
| 2 | Supplying, filling in foundation and plinth with sand in layers not exceeding 23cum (9\\") thick including watering and ramming with the cost, conveyance, royality, taxes of all materials, labour, T & P required for the Work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 3 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2\\") size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\\") thick to the required level ramming watering and curring etc. complete including cost and conveyance of all materials with all taxes and royalities and all labour with T & P required for the work etc. complete including dewatering if required as per specification and direction of the Engineer-in-Charge. |
| 4 | Flyash brick masonry in C.M. (1:6) using brick of size 25cmx11cmx 8cm of crushing strength not less than 75kg/cm2 with dimentional tolerance plus minus 8% after immersing the bricks for six hours befour use incl.lowering, placing in position, watering and curing and cost, conveyance, royalties and taxes of all materials, cost of labour & T&P etc. complete as per the direction of E.I.C..(For foundation & plinth). etc all complete.Foundation |
| 5 | Ground Floor |
| 6 | First Floor |
| 7 | Head Room |
| 8 | Cement concrete (1:2:4) using 12mm hard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge. |
| 9 | Double under reamed pile foundation with RCC M20 using 12mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel. |
| 10 | Providing and laying RCC M-25 grade using 20 mm and downgraded size hard black broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concerete and compacting by using vibrators watering and curring for 4 weeks centering and shuttering and finishing the exposed surface smooth providing grooves of beads where necessary including cost, conveyance, royalities and taxes of all material and labour required for the work etc. complete excluding cost and conveyance of M.S. Rod or steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting etc of the M.S. rods or tor steel and tying grills and placing in proper position as per specification and direction of the Engineer-in-charge. work with minimum compressivee strength in work test of 150kg/cm2 in 15cm cum cubes at 28 days cost and conveyance of M.S. Rod or steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting etc of the M.S. rods or tor steel and tying grills and placing in proper position as per specification and direction of the Engineer-in-charge. Footing |
| 11 | Plinth Beam |
| 12 | ColumnGround Floor |
| 13 | First Floor |
| 14 | Head Room |
| 15 | LintelGround Floor |
| 16 | First Floor |
| 17 | ChajjaGround Floor |
| 18 | First Floor |
| 19 | Roof SlabGround Floor |
| 20 | First Floor |
| 21 | Head Room |
| 22 | StaircaseGround Floor |
| 23 | First Floor |
| 24 | Constuction of un reinforced plain cement concrete pavement thickness as per design over a pre[ared sub basewith 43 grade cement or any other type as per clause 1501.2.2 M-30 (Grade ) coarse and fine aggregate conforming to IS:383 maximum size of coarse aggregates not exceeding 25 mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher. |
| 25 | Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and tying the grills hoisting lowering and placing in proper position as required for RCC works with cost, conveyance and taxes of M.S. Rods or Tor steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Weight of binding wires will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only).Ground Floor |
| 26 | First Floor |
| 27 | Head Room |
| 28 | Providing 20 mm thick grading plaster in C.M.(1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brushing laid to proper slope finished smooth including watering and curing with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.First Floor |
| 29 | Second Floor |
| 30 | Head Room |
| 31 | Labour for fitting and fixing of M.S. windows and door shutters and collapsible gate with top and bottom rails in proper position including making holes in walls in proper position including making holes in walls RCC structure and wood work etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2\\" to 3/4\\") (20mm not to exceed 25% ) with cost, conveyane, royalty and taxes of all materials, labour, T & P articles requried for the work etc complete as per specification and direction of the Engineer-in-Charge. |
| 32 | Supplying, fitting & fixing of WPC type door for toilet with laminate as per specification including cost of all materials and labour charges. |
| 33 | Supplying fitting and fixing of Flush Door of approved quality complete with frame , shutters and all fittings and fixtures T&P etc. as per specification and as per direction of the Engineer-in-Charge. |
| 34 | Supplying fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame , shutters and all fittings and fixtures T&P etc. as per specification and as per direction of the Engineer-in-Charge.Ground Floor |
| 35 | First Floor |
| 36 | 16mm thick cement plaster (1:6),finished smooth to stone work after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C.( A/R P/105 item 14 ).Ground Floor |
| 37 | First Floor |
| 38 | Head Room |
| 39 | Providing 12 mm thick C.P. in C.M.(1:4) to R.C.C surface finished smooth including closed deep chiping with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.Ground Floor |
| 40 | First Floor |
| 41 | Head Room |
| 42 | Providing 12mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curring with cost and conveyancec of all materials and labour with T & P required for the work with all taxes and royalities etc. complete in all respect as per specification and direction of the Engineer-in-Charge.Ground Floor |
| 43 | First Floor |
| 44 | Head Room |
| 45 | Supplying, fitting & fixing vitrified tile in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) & filling joints with white cement of approved quality including cost of materials, labour T&P etc required for the work all complete as per direction of Engineer-in-charge.Ground Floor |
| 46 | First Floor |
| 47 | Fixing tiles in Dadoos, skirting and risers of steps on 12 mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigment to match the shade of the tile etc. complete as per direction of Engineer-in-charge.Ground Floor |
| 48 | First Floor |
| 49 | Fixing Granite tiles (above 0.4 sqm to 1.0 sqm) in treads & steps on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete.Ground Floor |
| 50 | First Floor |
| 51 | Fixing chequered tiles in floors on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete. |
| 52 | Finishing surface of walls with one coat of cement based wall putty (water based ) ,cement primer & plastic emulsion paint of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials , taxes , labour with T & P etc. complete as per E.I.C.Ground Floor |
| 53 | First Floor |
| 54 | Head Room |
| 55 | Priming one coat with any approved primer over plastered surface as per direction of the Engineer-in-charge.Ground Floor |
| 56 | First Floor |
| 57 | Head Room |
| 58 | Distempering two coats with approved shade incl. cost of all material, labour and T&P etc. complete. (A/R P/99 Item-22)Ground Floor |
| 59 | First Floor |
| 60 | Head Room |
| 61 | Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of paint.Ground Floor |
| 62 | First Floor |
| 63 | Head Room |
| 64 | Painting two coats of enamel paint to new wood work and iron work including cost of paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.Ground Floor |
| 65 | First Floor |
| 66 | Head Room |
| 67 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick cicrular pipe with balustrade of size 32 mm x32mm x2 mm @ 0.90mtr . C/C an stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in staircase as per aproved design and specification, buffing, polishing etc, with cost ,conveyance, taxes of all materials ,labour T & P etc required for the complete in all respect .Ground Floor |
| 68 | First Floor |
| 69 | Providing Weep Holes is Brick Masonry/Paln/Rainforced concrete abutment, wing wall / return wall with 100mm dia AC pipe, extending through the full width of the structure wirh slope of IV:2Htowards drawing force etc, complete. |
| 70 | Providing and laying Filter media with granular crushed aggreates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wingwall return wall to the full height compared to firm condition complete as per drawing and technical specificationn clause 1204.3.8 including cost conveyance but excluding the charges of GST etc required as directed by Engineer-in-charge. |
| 71 | Soil Filling |
| 72 | E.I. WORKSRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1) |
| 73 | -do- .... Group B (1.1.2) |
| 74 | -do- .... Group C (1.1.3) |
| 75 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover (1.24.2) |
| 76 | 4 Modular box with base & cover (1.24.3) |
| 77 | 6 Modular box with base & cover (1.24.4) |
| 78 | 8 Modular box with base & cover (1.24.5) |
| 79 | 12 Modular box with base & cover (1.24.6) |
| 80 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 81 | S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 82 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 83 | S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator |
| 84 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) |
| 85 | -do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) |
| 86 | -do- 2x4sqmm +1x1.5sqmm ( 1.8.3 ) |
| 87 | -do- 2x6sqmm +1x2.5sqmm ( 1.8.4 ) |
| 88 | Supply, Installation testing and commissioning of 63 Amp. IC TPN Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.3) |
| 89 | 250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICTPN Main switch. |
| 90 | S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) |
| 91 | S/F of following 8 way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.6 |
| 92 | S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 93 | S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28) |
| 94 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick and 25mm x 5mm copper tape (1.15Kg. Per Mtr.) 3.5Mtr. & 20mm G.I.pipe medium class 2.7 Mtr. ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc wih charcoal and salt as required. (3.5 + 3.6) |
| 95 | Providing and fixing 8 SWG copper wire in recess for loop earthing as required. (3.18) |
| 96 | S/F of 1200mm A.C. Ceiling fan(5star) BLDC with all accessories and connections with out fan regulator (Make:Usha-Energia32/Crompton-Energino HS/Havells-Efficiencia DX/Anchor-Eco Breeze Urban/Orient-Ecotech Supreme/Pollycab-Affeciente Neo) |
| 97 | S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38) |
| 98 | S/F of Fan hok S'type made of 16mm MS rod as per specificationn |
| 99 | Supply, Installation, Testing and commissioning of 10W LED bulkhead fittings( (Make: Havels / Phillps / Crompton ) |
| 100 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 101 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 102 | Supply of instalation, Testing commissioning of 12 Watt. LED bulb |
| 103 | S/F of 15A modular socket on 2 Modular Metal box for A.C |
| 104 | S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL) |
| 105 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 106 | SITC of 1.5 Ton 5 star BEE Rating Inverter type split A.C. M/C with all accessories and connections and installation (Make - LG/ O General/Daikin) |
| 107 | S/F of 4KVA Voltage stabilizer(110-300) upto 1.5 Ton AC(Make-Microtech/V-Guard) |
| 108 | S/F of Nylon Netted Drain Pipe with C clamp for AC |
| 109 | SITC of Copper cooling Piping With Insulation and Power Cable for1.52Ton Split AC |
| 110 | S/F. of Powder coated Wall Stand for outdoor unit with Anchor Fastener For 2 Ton AC |
| 111 | S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB) |
| 112 | S/F of 2000 VA Inverter with 2 nos. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous/Exide) |
| 113 | wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm) |
| 114 | P/F of twin twisted cable 16/0.2 mm. (1.31) |
| 115 | S/F of 100 Amp. T.P.N. Cupper Bus Bar with all connections (Make:-BENLO/Equivalent) |
| 116 | S/F of 2x6sqmm twin core aluminium service connection wire with no. 10SWG G.I. wire duely cliped |
| 117 | S/F of oval shaped Portico lamp |
| 118 | P.H. WORKSEarth work in all kinds of soil in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding o.30 in depth and as per direction of E.I.C .- Initial lift up to 1.50m |
| 119 | 2nd depth upt 3.00 mtr |
| 120 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 121 | Supplying all materials, labour T&P and providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 122 | Supplying all materials, labour T&P and providing c.c (1:1.5:3) using 12 mm h.g. chips including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 123 | First Floor |
| 124 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. -- In Foundation & Plinth in CM (1:4) |
| 125 | Supplying all materials, labour, T &P and providing C.C (1:1.5:3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C. |
| 126 | Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite etc. complete as per directio n of E.I.C. |
| 127 | Supplying all materials, labour, T&P and providing rigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per direction of E..I.C.- R.C.C.Slab |
| 128 | For RCC Wall |
| 129 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.-- 12mm thick C.P with C.M. (1:4) |
| 130 | 6mm thick C.P with C.M. (1:4) |
| 131 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 132 | Supplying all materials, labour, T&P and providing PVC Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:3:6) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.- 160mm x 160mm x 160mm PVC Tee |
| 133 | Supplying all materials, labour, T&P and providing pre-cast R.C.C. Manhole cover with C.C. ( 1:1.5:3) of 12 MM h. g. chips including conveyance of all materials to site after payment of royality and taxes etc.all complete as per PH.Specification and direction of Engineer-in-charge. |
| 134 | Supplying all labour, materials T&P and fixing of M.S.Step iron in 12mm dia M.S. Steel Bar and fixing into walls of septic tank duly embeded in C.C (1:3:6) all complete as per P.H. Specification and direction of E.I.C. |
| 135 | Filling F&P with excavated materials, including watering and ramming as per direction of E.I.C. |
| 136 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specification and direction of Engineer-in-charge[Gr. Floor] |
| 137 | First Floor |
| 138 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge[Ground Floor] |
| 139 | First Floor |
| 140 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 141 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 142 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C. pan/Orissa Pattern Squatting pan) duly embedded in c.c.(1:5:10) using 4 cm h.g. Metal all complete as per direction of E.I.C.- 580x440mm Orissa Pan.(Neycer/Cerra/ Parry ware/ Hindware) |
| 143 | Supplying all materials, labour T&P and fixing Wash Down Water Closet (European type W.C. pan) with Integral S or P trap to the floor with wooden plug and C.P. screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C. 690x360x740mm One Piece EWC with Soft closed Seat and Cover and flush fittings with S Trap (Cera/ Parry ware/ Hindware) |
| 144 | Supplying all materials, labour T &P and fixing Wash Down Water Closet (European type W.C. pan) with Integral S or P trap to the floor with wooden plug and C.P. screws including jointing the trap with soil pipe in C.M. (1:1) etc. all complete as per specification & direction of E.I.C. E.W.C. with S trap Plain (Neycer/Cerra/ Parry ware/ Hindware). |
| 145 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C.(Neycer/Cerra/ Parrywear/ Hindware) |
| 146 | Supplying all materials, labour T&P and fitting & fixing SWR ventilating pipes and fittings of the following O.D conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.110 mm dia PVC SWR Pipes |
| 147 | 110 mm dia PVC SWR P Trap |
| 148 | 110mm dia PVC SWAR Nahani Trap without Jally |
| 149 | 110 mm dia PVC SWR DoorTee |
| 150 | 110 mm dia PVC SWR Door Cross Tee |
| 151 | 110 mm dia PVC SWR Door Bend |
| 152 | 110 mm dia PVC SWR Plain Bend |
| 153 | 110 mm dia PVC SWR Plain Tee |
| 154 | 110 mm dia PVC SWR Offset |
| 155 | 110 mm dia PVC SWR Cowl |
| 156 | 125 mm dia C.P.grating |
| 157 | 75 mm dia PVC SWR Pipes (4 Kgf/Cm2) |
| 158 | 75 mm dia PVC SWR Plain Bend |
| 159 | 75 mm dia PVC SWR Door Bend |
| 160 | 75 mm dia PVC SWR Plain Tee |
| 161 | 75 mm dia PVC SWR Door Tee |
| 162 | 75 mm dia PVC SWR Offset |
| 163 | Supplying all materials, labour T&P and cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. - 250 mm thick wall |
| 164 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware) |
| 165 | Supplying all materials, labour T&P and fixing pedestal for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware) |
| 166 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.- 600mm x 450mm B.E. Mirror (fixed type) |
| 167 | Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.- 20 mm x 600 mm long C.P Towel rail |
| 168 | C.P. Towel Ring (St.) |
| 169 | Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.C- C.P.Soap Holder. |
| 170 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C- 450x125mm size Plate Acrylic Shelf |
| 171 | Supplying all materials, labour T&P and fixing Flat back Stall type urinal (Standing Urinal)including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.--Flat back Stall type urinal(Standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe [CerraParrywear/Hindware] |
| 172 | 15mm dia C.P. Sprader |
| 173 | 32mm dia C.P. Dome Waste |
| 174 | Supplying all materials, labour T&P and fixing bowl pattern urinal including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.-- Flat back lipped wall urinal (standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe [Neycer/CerraParrywear/Hindware] |
| 175 | Supplying all materials,labour, T&P and fixing glazed earthen ware Squatting platesize 600 x 350 mm with integral longitudinal flushing pipe including embedding the plate in 25mm thick cement mortar (1:8) laid over PCC (1:5:10) using 40 mm size metal etc all complete as per specification and direction of the E.I.C.- Squatting urinal(ISI mark) (Parry ware/hind ware/Cerra) |
| 176 | Supplying all materials, labour T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mm size h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap Fly Ash brick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C.- Inside size 250mm x 250mm gully trap Chamber |
| 177 | Supplying all materials, labour T&P and constructing Inspection chamber of the following sizes with c.c (1:3:6) using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in c.m (1:6), moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity arround the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C.-- Inside size 760mm x 760mm x 460mm I.C. |
| 178 | Supplying all materials, labour T&P and constructing man hole chamber of the following sizes with c.c. ( 1:3:6) using 40 mm size h.g. metal on bed Ist class Fly Ash brick work in c.m. (1:6) moulding and shaping the channel inside and benching with c.c (1:11/2:3) using 12mm size h.g. chips, 12 mm thick c.p (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C. cover slab in c.c (1:11/23) using 12 mm size h.g. chips with R.C.C m.h. cover, e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C.- Inside size 910mm x 910 mm x 600 mm |
| 179 | Inside size 910mm x 910 mm x 750 mm |
| 180 | Inside size 910mm x 910 mm x 910 mm |
| 181 | Supplying all materials, labour, T&P and laying 110 mm dia SWR pipes of the following O.D conforming to IS No. 13592 and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.- 110 mm dia PVC SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 182 | 160 mm dia PVC SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 183 | Supplying all materials, labour T&P and constructing soak way pit of the following sizes with dry brick walling form bottom up to invert of inlet pipe and 1st class Fly Ash brickwork in c.m(1:6) for the remaining height at top, 12 mm thick c.p(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining R.C.C. cover slab in c.c (1:11/2:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in stoney earth and refilling the cavity around the pit & painting the iron works, watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.-1.40mtrs.dia x 2.0mtr.deep soak way pit |
| 184 | 1.20mtrs.dia x 2.0mtr.deep soak way pit |
| 185 | 1.00mtrs.dia x 2.0mtr.deep soak way pit |
| 186 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.0.90m dia x 2.00m deep RCC Ring Pit |
| 187 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) ]2000 Ltrs. Capacity F.G.Over Head Tank.(on roof 1st floor) |
| 188 | Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class Fly Ash brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size Fly Ash bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.60mtr xl.60mtr x0.l0mtr thick, R.C.C. beam of size 0.25m x 0.30m and 2.60m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C - For 2000 Ltr. Capacity Over Head Tank(on roof of 1st floor) |
| 189 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C - 20 mm dia PVC (ASTM) Pipe [Internal] |
| 190 | 25 mm dia PVC (ASTM) Pipe [Internal] |
| 191 | 25 mm dia PVC (ASTM) Pipe [External] |
| 192 | 32 mm dia PVC (ASTM) Pipe [External] |
| 193 | 40 mm dia PVC (ASTM) Pipe [External] |
| 194 | 32mm dia HDPE Pipe [External Including Earth Work] |
| 195 | 32mm dia HDPE Pipe [Inside Tw] |
| 196 | 20mm dia HDPE Pipe [External] |
| 197 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 198 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 199 | Supplying all materials, labour, T&P and fitting & fixing brass /C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.- 15 mm dia C .P S.B. Bib Cock [Jaquar] |
| 200 | 15 mm dia C .P L.B. Bib Cock[Jaquar] |
| 201 | 20mm dia C .P Conceal Stop Cock[Jaquar] |
| 202 | 15 mm dia C .P Angle Stop Cock[Jaquar] |
| 203 | 15 mm dia C .P Pillar Cock Swan Neck[Jaquar] |
| 204 | 15 mm dia C .P Two Way Bib Cock [Jaquar] |
| 205 | 15 mm dia C .P Health Facuet[Jaquar] |
| 206 | 15 mm dia C .P Extension Piece |
| 207 | 25 mm dia Brass Full Way Valve [Good Quality] |
| 208 | 25 mm dia PVC Ball Valve (Metal Ball) [Good Quality] |
| 209 | 32 mm dia PVC Ball Valve (Metal Ball) [Good Quality] |
| 210 | 40 mm dia PVC Ball Valve (Metal Ball) [Good Quality] |
| 211 | Supplying all materials, labour, T&P and fitting and fixing C.P. shower with 15 mm or 20 mm inlet with C. P. shower arm including polishing all complete as per P.H. specification and direction of E.I.C. |
| 212 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Neycer/Cerra/ Parry ware/ Hindware) |
| 213 | 125x100mm dia Tube Well through DTH Method Labour for drilling a perfectly vertical bore holes of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilled rig (650cmf/200psi) as required to suit the site condition as per the direction of E.I.C. including use of own rig with its accessories, tools and plants and consumable etc. for finished bore suitable for lowering of 125mm dia PVC/GI Pipes for housing filled with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC) casing pipes it required to prevent collapse of overburden portion is to be provided by the contractor including lowering and withdrawing after completion of tubewell.-Drilling of 125mm dia bore |
| 214 | Lowering the following sizes GI/PVC Pipes with or without slotted pipes as per the necessity from gravel level upto 30 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipes and supplying and fixing all jointing materials tools and plants etc. completes and keeping the top of the casing pipes threaded including plugging tubewell to prevent entryof foreign materials. From above- Lowering of 125mm dia PVC Pipe |
| 215 | Cost of 125mm dia PVC Pipe [ASTM-D-1785/2021-Schedule-80) |
| 216 | Cleaning and developing the tube wells with their own compressor continuously jworked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of EIC |
| 217 | Supplying all materisl, labour, T & P and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition. |
| 218 | Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyance as per direction of Engineer-in-charge. |
| 219 | Supplying all labour, T&P and materials for Construction of Masonary Platform for India Mark-II Hand Pump as per I.S. Specification of 1.85 mtr Outside with Cement Concrete (1:2:4) with 12mm size hard granite C.B. chips etc. all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipe as per direction of Engineer-in-Charge. |
| 220 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 221 | Supplying of ISI Mark 1.00 HP Single Phase Vertical Submersible Pump Set with Discharge of 1800-2200 liter/hour and a head of 45-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage. |
| 222 | Supplying all labour, T&P and fitting and fixing of 1.00 HP Single phase vertical Submersible Pump Set with commissioning and testing, Electrification etc. all complete as per direction of EIC |
| 223 | Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.00 HP Single Phase Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 224 | Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 225 | Supplying and fitting & fixing of Plastic rope, M.S. Well Cover, M.S. Clamp, Stainless Steel Short piece, Bend & Socket including all const, conveyance and taxes etc. all complete as per direction of engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender