Tender For Providing And Installation Of Solar Led Light Fitting With Pole In Dalit Wasti (Bhim Nagar) G.P. Warvati Tq.Beed Dist.Beed
Tender Value
8.46 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
8466
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Beed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Solar Led Light Fitting With Pole In Dalit Wasti (Bhim Nagar) G.P. Warvati Tq.Beed Dist.Beed
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and erecting Street light bracket for erection of side entry fitting on pole with 40 mm. dia. ‘B’ grade G.I. pipe of required length complete as per specification no. FG-BKT/SLB |
| 2 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP |
| 3 | Supplying, erecting, testing & commisioning metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and painted with one coat of red lead paint and 2 coats of enamel paint or powder coating complete as per specification no. CP/SH/CR (For Battery 0.2x0.3x0.16 m) |
| 4 | Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer |
| 5 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). |
| 6 | Supplying, erecting, testing & commisioning self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard |
| 7 | Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 8 | Supplying, installing,testing and commissioning of solar panel comprising high efficiency polycrystalline photovoltaic cell 125 Wp, necessary clamps and module frame on existing structure complete with Following Specifications.* Maximum Power: 125 W.* Operating Temprature Range: 40 to 85 Degrees celsius* Short Circuit Current (Isc): 7.5A* Module Voltage: 12 V* Open Circuit Voltage (Voc): 22.22 V* Operating (Nominal) Voltage: 12V* Operating Maximum Voltage : 17.59 V* Maximum Series Fuse Rating (A) : 15.0A* Number of Cells: 72 (18x4)* Dimension: 1490x675x35(mm)* Weight (Kg) : 13.0 Kg (With Warrantee 5 Years) |
| 9 | Supplying and erecting DC LED Street light fitting of 12V30 W, including first 6| hr.full intensity light output and following 6 hr.with half intensity light output, with lumen < 3750,colour temp 5500K-6500K,colour redering index>70, PWM charge controller efficiency>90%,LED driver efficiency>90% Duty cycle first six hours 100% Rest 50% lightLED external optics 145x90 degree Street light lens,class IP 66, charge controller methodology-three stage battery charge monitoring algorithm,maximum charging current 10 Amps,short circuit protection, battery over charge protections, battery deep discharge protection,solar panel dusk to dawn operation NTTV-4V,DTTV-6V,battery low load disconnect voltage 11.2V battery full load disconnect voltage 13V,battery constant voltage set point 14.7V,LED indication-green off: Bbattery not charging PV low,green on: battery charging,green flashing: battery full, Red off: battery not discharge,Red on: Battery discharge,load disconnect, overall dimension-255 mmx90mmx60mm,overall Weight-1 kg,and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete (With Warrantee 5 Yars) |
| 10 | Supplying, installing, testing and commissioning of Lifepo4 battery with capacity of 12.8V-78Ah 415ABMS with Max Pulse Discharge Rate 80A, Charging Current 15A, Life 3000 Cycles, Suitable to Charge Lithium Cell with necessary wiring connections, with IP 65 alluminium cabinet with stand and nut bolts complete.,Storedcasing material-Alluminium, Terminal-MC4 connector, charge temprange-0-45C, Discharge temperature range-20-55C, Storage temp-20-45 C Battery Size: 198x168×170 mm, Weight 12 Kg*Nominal Voltage: 12.8V,*Nominal Capacity: 78Ah,*Maximum charging Current: 50A,*Instantaneous discharge current:200A*Continuous discharge current: 100A,*Life: 3000 cycles or more,*Charging temperature: 0.45@C,*Discharge temperature: 20-65@C.* Storage temperatur: 20-65@C*Operating Voltage range: 10.0 V-14.6 V,*Overload protection Voltage: 14.6 V (With Warrantee 5 Yars) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender