Tender For Civil Maintenance And Painting Works At Residences No. 17, 18 (New), And 6 (New) In Gautampalli Colony.
Tender Value
2.40 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
1 days left
EMD
24000
Bank guarantee accepted
Document Fee
770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Civil Maintenance And Painting Works At Residences No. 17, 18 (New), And 6 (New) In Gautampalli Colony.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Old Plaster or Skirting Racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. DSR No-15.56, |
| 2 | 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DSR-13.4.1, |
| 3 | Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. DSR-13.88, |
| 4 | Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), |
| 5 | Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1), |
| 6 | Wall Painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) Content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. Two Coat, DSR.N0-13.82.2), |
| 7 | Painting with synthetic enamal paint of approved brand and manufactorar of required colour to give an evan shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR No. 13.62.1 |
| 8 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. Stainless Steel A lSl-304(18/8) Wash basin Size-530x345 mm with single 15 mm C.P. brass pillar tap. (17.7.11) |
| 9 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal dia pipe )18.8.2, |
| 10 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal dia pipe )18.8.3, |
| 11 | Providing and fixing C.P. Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1) |
| 12 | Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS Standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1) |
| 13 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe 32mm dia (17.28.1.1). |
| 14 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32mm dia(17.28.2.1). |
| 15 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). |
| 16 | Providing and fixing 600x120x5 mm glass Self with edge round off, supported on anodiesd aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete. (17.33). |
| 17 | Providing and fixing TOILET PAPER HOLDER C.P. Brass (17.34.1). |
| 18 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 125x64x2.50mm (9.71.1) |
| 19 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm (9.81.1) |
| 20 | Providing and fixing magnetic catcher of approved quality in cupboard/wardrobe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) (9.114.2) |
| 21 | Providing and fixing power coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per direction of Engineer-in charge. (9.115) |
| 22 | Providing and fixing ISI marked oxidised M.S Tower bolt black finish (Barrel type) with necessary screws etc complete Copper Oxidised as per lS 1378, 250x10 mm (DSR -9.63.1) |
| 23 | Providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (DSR -9.74.1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender