Tender For Special Repair To Building No T-3 (Offr Mess) At Certain Location Of Saa Under Ge(S) Tezpur
Tender Value
47.02 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
21 days left
EMD
94100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No T-3 (Offr Mess) At Certain Location Of Saa Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge. |
| 3 | Sand Filling under floors/cushion or in foundations including watering and consolidation complete all as specified and as directed by Engr -in-Chrage. |
| 4 | M&L for PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling and mass concrete.complete all as specified and as directed. |
| 5 | Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and as directed. |
| 6 | M&L for Brickwork with subclass ‘B’ bricks,, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm complete all as specified and directed. |
| 7 | M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 8 | M & L, 15mm thick rendering in C.M. (1:6) on fair faces of brick work finished even and fair without using extra cement.complete all as specified and as directed. |
| 9 | M&L for RCC M-25 (20mm graded aggregate)as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underremaed pliles and mass concrete complete all as specified and as directed. |
| 10 | M&L for RCC M-25 using 20mm graded aggregate as columns, pillars, piers ,posts and struts complete all as specified and as directed. |
| 11 | M&L for RCC M-25 using 20mm graded aggregate as in beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and as directed. |
| 12 | M&L mild steel bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 13 | M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed |
| 14 | M&L for form work to sides of concrete foundations, footings, bases of colunns, raft and raft beams sides and soffits of foundation and plinth beams,and similar work , vertical or batter, rough finished surface of concrete complete all as specified and as directed. |
| 15 | M&L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs and similar works for rough finished surface of concrete complete all as specified and as directed. |
| 16 | M&L for form work to sides of columns, posts, pillars etc Rectangle/circular in shape for fair finished surface of concrete complete all as specified and as directed. |
| 17 | S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointd in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed |
| 18 | M & L Vitrified Ceramic tiles (premium) Dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick creed bed in cement mortar (1:4) complete all as specified and as directed |
| 19 | S&F Coloured Glazed ceramic tiles 450 x 350 mm x 7 to 8mm thick, in vertical surfaces such as wall, skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:4) complete all as specified and directed. |
| 20 | M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed. |
| 21 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed. |
| 22 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.complete all as specified and as directed. |
| 23 | Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.complete all as specified and as directed. |
| 24 | S&F powder coated aluminium frame(minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 25 | S&F powder coated aluminium(Thickness or powder coating not less than 50 micron). window and ventilator shutters, sliding type , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangment etc.complete all as specified and directed |
| 26 | S&F Powder Coated aluminium aluminium door shutters(Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 27 | S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including petty repairs material like screws/nails, plug, MS fillet etc in Steel windows etc. to make it functional complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items). |
| 28 | S& F 4.0 mm thick sheet glass plain ordinary quality and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares.complete all as specified and as directed. |
| 29 | S& F 5.0 mm thick sheet glass ordinary/tinted/ Filmed to match exixting quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.complete all as specified and as directed. |
| 30 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with printed sdeet PVC sheet reinforced with MS square tube,suppling & fixing in opening as per specification & Drawing, complete all as specified and as directed. |
| 31 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 32 | S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction.complete all as specified and as directed. |
| 33 | Supply and fix, 35 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and directed |
| 34 | Supply and fix 35 mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars any Number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately). |
| 35 | S & F brass mortice lock verticle type 100 mm 4/6 levers complete all as specified and directed |
| 36 | M&L 12mm thick clear toughened glass partition/door inluding fixing stainless steel brackets, cleats and fixing accessories for frame less toughened glass fixing in fixed opening as per manufacture's instructions and approval of garrison engineer.complete all as specified and as directed. |
| 37 | S & F powder coated aluminium door shutters (Thickness or powder coating not less than 50 micron)., aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed |
| 38 | S& F 5.0 mm thick sheet glass ordinary/tinted/ Filmed to match exixting quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.complete all as specified and as directed. |
| 39 | S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.complete all as specified and as directed. |
| 40 | S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws.complete all as specified and as directed. |
| 41 | S&F MS 200mm ordinary pattern door spring including roller and roller plate complete all as specified and as directed. |
| 42 | S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.complete all as specified and as directed. |
| 43 | S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed |
| 44 | M&L for applying for preparation of new steel surfaces of any description ,over 10cm width or girth incl and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specefied and directed. |
| 45 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.complete all as specified and as directed. |
| 46 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern) single piece with PP soft close seat cover, hinges, duel flush chistern fitting and complete accessories set in white colour of approved models as approved by GE, complete all as specified and directed |
| 47 | S&F in repair 15mm bore health faucet (ABS body) with 8mm Dia, 1.2 m long flexible tube & wall of approved models as approved by GE. complete all as specified and directed. |
| 48 | S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed. Of approved Models,as approved by GE. |
| 49 | S&F in repair chromium plated toilet paper holder complete all as specified and directed.of approved models ,as approved by GE. complete all as specified and as directed. |
| 50 | S&F Angular stop cock cast copper alloy CP with wall flange for 15mm bore ,Make: Jaquar or Equivalent approved by GE complete all as specified and directed. |
| 51 | S&F 5 mm thick mirror with decorative frame of size of face size 40 to 50 mm mounted on 10 to 12 mm water proof plywood and fixed in to chromium plated / stailess steel cup washers of approved pattern as directed by Engr-In-charge complete all as specified and as directed. |
| 52 | S&F in repair towel Rail chromium plated complete all as specified and directed. Make: Jaquar or Equivalent as approved by GE complete all as specified and directed. |
| 53 | S&F in repair towel ring chromium plated complete all as specified and directed. as approved by GE complete all as specified and as directed. |
| 54 | S&F in repair chromium plated Corner/ front glass shelf with bracket complete all as specified and directed. approved by GE |
| 55 | S&F in repair vitreous china Table top Basin of approved shape & size including taps, waste chain, plug and porcelain stopper, brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 56 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete complete all as specified and as directed. |
| 57 | S&F in repair Viterous china white urinal, half stall type of approved shape & size complete as per manufacture's instructions and approval of garrison engineer.complete all as specified and directed. |
| 58 | Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. |
| 59 | S&F 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and ditected |
| 60 | S&F PVC (SWR) floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed. |
| 61 | S&F PVC (SWR) multi floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed. |
| 62 | S&F PVC (SWR) 75mm bore bends any radius complete all as specified and as directed |
| 63 | S&F PVC (SWR) pipes 75mm single socketed in any length with rubberring joints laid in trenches or in floors incl dismantling complete all as specified and as directed. |
| 64 | S&F PVC (SWR) pipes 110mm single socketed in any length with rubberring joints laid in trenches or in floors incl dismantling complete all as specified and as directed. |
| 65 | S&F PVC (SWR) 110mm bore bends any radius complete all as specified and as directed |
| 66 | Supply and fix, as in repairs, grating round/ Square Anti foul cockroach proof 100 mm dia size of stainless steel complete all as specified and directed. |
| 67 | S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore.complete all as specified and as directed. |
| 68 | S&F PVC (SWR) floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed. |
| 69 | S&F PVC (SWR) multi floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed. |
| 70 | S&F 32/40 mm dia PVC waste pipe for WHB/Kitchen sink including all necessary fixing arrangement as in repair complete all as specified and as directed. |
| 71 | Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, as in framed or Unframed Work, complete all as specified and as directed. |
| 72 | M&L Second Class Hardwood in Scantlings Wrought Timber Framed and fixed complete all as specified and as directed. |
| 73 | Demolition of reed, lathing, single or double including battens and plasters or chicken wire lathing complete all as specified and as directed. |
| 74 | M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm complete all as specified and as directed. |
| 75 | M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair complete all as specified and as directed. |
| 76 | S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress complete all as specified and as directed. |
| 77 | Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters complete all as specified and as directed. |
| 78 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed |
| 79 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 80 | S&F for ACP Sheet of 4 mm thick of any colour, for external wall including necessary frame work (SS/Aluminium as directed) vertically and horizontally as per manufacturer instruction and approved drawing along with connected accessories of selected quality and approved design for multi storied building incl all necessary scaffolding and safety measurers complete all as specified and directed |
| 81 | Dismantling asbestos cement/ galvalume corrugated semi corrugated etc sheets in roof covering.complete all as specified and as directed. |
| 82 | S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550 Mpa as in roof covering/wall cladding/sun shed etc fixed with self tapping screws complete all as specified and as directed. |
| 83 | All as per item no-82 above but plain sheet for ridge ,gutter,Eaves board etc fixed with self tapping screws complete all as specified and as directed. |
| 84 | Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed. |
| 85 | M&L Applying two coats of acrylic distemper to newly plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall complete all as specefied and directed. |
| 86 | M&L Applying two coats of acrylic distemper to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment complete all as specefied and directed.. |
| 87 | M&L for Old wall surface including properly preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and pigment and applying one coat of weather coat water proofing paints as in boundry wall, single , double and triple storey bldg, complete all as specified and as directed by Engineer-in-Charge. |
| 88 | S&F Rolled sections as in main and cross beams,hip and jack rafters,purlins where connected to commons rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 89 | S&F 20mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors incl conceiling/ clamping etc and taking down or up of GI/CPVC/ UPVC Pipe, complete all as specified and directed |
| 90 | S&F 15mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete towalls, ceilings or in floors incl conceiling/ clamping etc taking down or up of GI/CPVC/ UPVC Pipe, complete all as specified and directed. |
| 91 | M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr and every corner and filled with bituminous filler complete all as specified and as directed. |
| 92 | M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed. |
| 93 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed. |
| 94 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specififed and directed |
| 95 | S & F Extruded brass handles 150 mm long , fabricated type polished complete all as specified and as directed. |
| 96 | Taking down Copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases etc of existing wall for wall making out concealed conduit etc. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items herein-below complete all as specified and as directed. |
| 97 | Taking down main switches and DBs of any type and make including wooden board / junction box. complete all as specified and as directed. |
| 98 | M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium duty conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth rod, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed.complete all as specified and as directed. |
| 99 | All as per item No. 98 here-in-before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. |
| 100 | All as per item No. 98 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. |
| 101 | All as per item No. 98 here-in - in-before but for 5 Amps socket point on the same board controlled by one switch.complete all as specified and as directed. |
| 102 | S&F modular switch flush type, 6 Amp, one way, 1 module complete all as specified and as directed. |
| 103 | S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed. |
| 104 | S&F modular switch, 16 Amp flush type 1 module complete all as specified and as directed. |
| 105 | S&F modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed. |
| 106 | S&F modular Fan Regulator stepped type 2 module, 120W complete all as specified and as directed. |
| 107 | S&F in modular bell push, flush type, 5 Amp, 1 module complete all as specified and as directed.complete all as specified and as directed. |
| 108 | S&F call bell Dingdong type AC 230 volts single pole.complete all as specified and as directed. |
| 109 | S&F ceiling rose surface bakelite three terminals.complete all as specified and as directed. |
| 110 | Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten Aluminium housing and integrated electronic driver with high efficient LEDs 18 Watt with accessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and incl connection.complete all as specified and as directed. |
| 111 | S&F on wall security light luminaire for 1x25 W LED with deep drawn housing complete with GI Bracket of suitable size and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor complete all as specified and as directed. |
| 112 | Supply and fix for Recess/Surface mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type Armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt 6500 K LED CDL light, complete all as specified and as directed. |
| 113 | M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq. mm drawn through PVC conduit and all accessories including making good the disturbed surface by Putty and matching the colour of the wall/paint including making good the disturbed surface by Putty and matching the colour of the wall/paint including making good the disturbed surface by Putty and matching the colour of the wall/paint. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.complete all as specified and as directed. |
| 114 | M&L & Repair for sub main wiring with Four run of 6.0 Sq. mm PVC un-sheathed copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq. mm drawn through PVC conduit and all accessories including making good the disturbed surface by Putty and matching the colour of the wall/paint including making good the disturbed surface by Putty and matching the colour of the wall/paint including making good the disturbed surface by Putty and matching the colour of the wall/paint. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.complete all as specified and as directed. |
| 115 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatized. Powder coated. 200 A copper bus bar, 1P 43 Triple pole (TPN) 4/5 Volt, double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed. |
| 116 | Supply, installation, testing & commissioning of wall split-type Air Conditioner unit of capacity 1.5 TR based on inverter Technology, comprising of indoor & outdoor unit complete with cordless remote control unit & with in-built air ionizer & plasma filter for better indoor air quality with minimum 5 star rated in electric connection complete all as specified and directed. |
| 117 | S&F metal clad socket outlet with MCB Double Pole 20-32 Amp, 240 V including sheet metal enclosure complete fixed on board including complete electrical connection by proper size of copper lugs complete all as specified and directed. |
| 118 | S&F MCB 1P metal enclosure for DBs double door (fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 100 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB's complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and as directed. |
| 119 | S & F MCB 'C' series Triple pole and neutral 100 Amps, breaking capacity 10KA complete all as specified and directed |
| 120 | S & F MCB 'C' series Single pole and neutral 40-63 Amps, breaking capacity 10KA complete all as specified and directed |
| 121 | S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed |
| 122 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 123 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook complete all as specified and directed |
| 124 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender