Tender For Provision Of Mes Complex At Hisar Mil Stn
Tender Value
13 Crore
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
9.75 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Mes Complex At Hisar Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | \\" BOQ \\" BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : CWE HISAR Name of Work: PROVN OF MES COMPLEX AT HISAR MIL STN Contract No: CWE/HSR-T-24 OF 2026-27 Bidder Name : GENERAL SUMMARY (SCHEDULE OF WORKS) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # Sl.No. Description of Parts/ Item Item Code / Make No. orQty. Unit Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Figure TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates. |
| 3 | Sch A Part I (A) (a) Design, fabrication, ercetion and construction of PEB structure (D/S) for CWE office with built-up rectagular section columns, composite deck floor & roof slab, glazing works complete all as shown in dwg , including vetting of structural drawing of structural design from any IITs/NITs etc complete. |
| 4 | (b) Fabrication, erection and construction of PEB structure for (D/S) for GE office with built-up rectagular section columns, composite deck floor and roof slab complete all as shown in dwg , including vetting of structural drawing of structural design from any IITs/NITs. |
| 5 | (c) Design and construction of RCC structure for sample room & duty room all as shown in dwg, including vetting of structural drawing of structural design from any IITs/NITs etc complete. |
| 6 | (d) Erection and construction of PEB structure (S/S) for open car parking with built-up box section columns and Galvalum sheet roof complete all as shown in dwg , including vetting of structural drawing of structural design from any IITs/NITs. |
| 7 | Lump sum price worked out by the tenderer for BUILDING WORKS as listed in Schedule ‘A’ Part-I (B) (Ref pre-priced schedule attached separately) |
| 8 | Lump sum price worked out by the tenderer for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part-II(Ref pre-priced schedule attached separately) |
| 9 | Lump sum price worked out by the tenderer for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part-III(Ref pre-priced schedule attached separately) |
| 10 | Lump sum price worked out by the tenderer for ROAD, PATH AND CULVERT WORKS as listed in Schedule ‘A’ Part-IV(Ref pre-priced schedule attached separately) |
| 11 | Lump sum price worked out by the tenderer for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-V(Ref pre-priced schedule attached separately) |
| 12 | Lump sum price worked out by the tenderer for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part-VI(Ref pre-priced schedule attached separately) |
| 13 | Lump sum price worked out by the tenderer for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part-VII(Ref pre-priced schedule attached separately) |
| 14 | Lump sum price worked out by the tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-VIII(Ref pre-priced schedule attached separately) |
| 15 | Lump sum price worked out by the tenderer for SUMMER APPLIANCES as listed in Schedule ‘A’ Part-IX(Ref pre-priced schedule attached separately) |
| 16 | Lump sum price worked out by the tenderer for SITE CLEARANCE, EXCAVATION AND EARTH WORKS as listed in Schedule ‘A’ Part-X(Ref pre-priced schedule attached separately) |
| 17 | Lump sum price worked out by the tenderer for DEMOLITION as listed in Schedule ‘A’ Part-XI(Ref pre-priced schedule attached separately) |
| 18 | Schedule 'A' Part-XIII(MISCELLANEOUS PARTS) |
| 19 | Construction of Compound wall incl excavation, RCC footing, column, plinth beam, lintel beam, brick work, plastering, painting (cement based paint over RCC & brickwok and enamel paint for steel structure) return filling and removal of soil complete all as specified in drawing and as directed by Engineer-in-charge. |
| 20 | Construction of Chain link fencing incl excavation for post, Fixing Angle iron 65x65x6mm post, Flat iron 40x6mm, 10mm dia round bars, Chain link fence 4mm dia and opening 4\\", bolts 12-20mm dia - 5cm long for fixing fencing, painting over steel surface with enamel paint and removal of soil complete all as specified in drawing and as directed by Engineer-in-charge |
| 21 | Construction of Steel Gate 7.0m wide incl RCC columns 2.0 m height, guide rails, cement based paint etc. complete all as specified in drawing and as directed by Engineer-in-charge. |
| 22 | S&F push cock CP 15 mm bore fixed for urinals complete all as specified and directed. |
| 23 | Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% of capacity 1 KVA. |
| 24 | Supply and fix air cooled split unit air conditioner inverter type BEE 5 Star rated of capacity 2 Tonne single phase 230 Volt 50 Hz AC indoor & outdoor unit complete with cordless remote & mounted on brackets for outdoor unit including provision of waste water pipe from indoor unit to outside the building complete all as specified. |
| 25 | Supply and fix air cooled split unit air conditioner inverter type BEE 5 Star rated of capacity 1.5 Tonne single phase 230 Volt 50 Hz AC indoor & outdoor unit complete with cordless remote & mounted on brackets for outdoor unit including provision of waste water pipe from indoor unit to outside the building complete all as specified. |
| 26 | Supply and fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 volt to 250 volt with output voltage stabilized 230 Volt with accuracy of +/- 2.5% of capacity 5 KVA with mounting bracket complete with time delay relay.(For ACs) complete all as specified. |
| 27 | Wiring for group controlled(looped) light point /fan point /exhaust point (without independent switch) with 1.5 sqmm FRLS single core PVC insulated and unsheathed multistranded copper conductorre and incl PVC rigid non metallic concealed conduit of size 20/25 mm dia medium duty, ISI marked ivory colour with all conduit fittings/fixing accessories and rearthing the point with 1.5 sqmm FRLS single core PVC insulated copper conductor single core cable as specified and directed. |
| 28 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower for inserting pipe of size 40 mm to 100 mm bore dia for proection of LT Cables. |
| 29 | Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed by Engr-in- Charge :- (Panel B):-(a) MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal release & adjustable magnetic 3.5 to 10.0 In - 01 No for incoming.(b) Copper Busbar 400 Amps current rating duly sleeve insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set.OUTGOING(c) MCCB 4 Pole,125 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) adjustable TM Setting (Optium 2.0) - 02 No (For GE Hisar)(d) MCB TPN 32 Amp 415 V 10 KA- 01 Nos C series type (Feeder Piller 1)(e) MCB SPN 10 Amps, 240 Volt C series type - 01 Nos (for Parking of GE Hisar ).(f) Digital Ammeter 0-250 A with selector switch & CTs of suitable capacity - 01 set.(g) Digital volt meter 0-500 V with selector switch - 01 No.(h) LED Indicating Lamps R,Y,B - 01 Set |
| 30 | Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed by Engr-in- Charge (Panel-C) :-(a) MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal release 0.8 to 1.0 & fixed magnetic type - 01 No for incoming.(b) Copper Busbar 250 Amps duly sleeve insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set.Outgoings :-(c) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 02 No for CWE Office(d) MCB TPN 32 Amp 415 V 10 KA- 01 Nos ( For Feeder Piller-2).(e) MCB SPN 10 Amps, 240 Volt C series type - 02 Nos (for Parking of HQ CWE ).(f) Digital Voltmeter 0-500 V with selector switch- 01 No(g) Digital Ammeter 0-200 A with selector switch & CTs of suitable capacity-01 set(h) LED Indicating Lamps R,Y,B |
| 31 | Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed by Engr-in- Charge (Panel-D) :-(a) MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 01 No for incoming.(b) Copper Busbar 300 Amps duly sleeve insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCCBs - 01 Set.Outgoings :-(a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with adjustable thermal setting (Optium 2.0) - 02 No for CWE Office(d) MCB TPN 32 Amp 415 V 10 KA- 01 Nos ( For Feeder Piller-3).(e) MCB SPN 10 Amps, 240 Volt C series type - 01 Nos (for Parking of GE(W) Hisar ).(f) Digital Voltmeter 0-500 V with selector switch- 01 No(g) Digital Ammeter 0-200 A with selector switch & CTs of suitable capacity-01 set(h) LED Indicating Lamps R,Y,B |
| 32 | Supply & fixing LT feeder pillar (Outdoor type) single door type cubical typeof Size 50cm x 50cm x 25cm made out of CRCA sheet 3.15 mm thick dust and vermin proof and angle iron size of 40 x 40 x 5mm having 200 Amp rated Al bus bar .Panel should be covered from all side with front lockable door and hinges complete and powder coated. ( 3 For office, 2 for Complaint Cell) |
| 33 | Supply and fix GI pipe bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos for holding one bracket, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable size complete all as specified and diected. |
| 34 | Supply and fixing of energy efficient LED street light fittings of 45 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge.(a) Lumen system efficacy of luminarie should be minimum 100 Lumen per watt.(b) Input voltage range 140 to 270 volts(c) Temp operating range minus 10°C to Plus 50°C (d) Power factor : minimum 0.95 (e) THD : Max 10%(f) CRI : More than 80 and CCT : 5700 K(g) IP rating : IP66(h) IK rating : Minimum IK07(j) Pressure die cast aluminium alloy for housing and heat resistant alear toughened glass (k) Built in potted LED driver of the make as of the luminaire.(l) LED driver should be complete with all protection viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer.(m) Surge protection 10 kV (inbuilt + extended)(n) Lens:- High sfficiency wide angle lens(o) BIS approved fixtures and driver(p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) |
| 35 | Supply and fixing of energy efficient LED Flood light fittings of 120 W capacity including electric connection, complete fitting including all accessories and following specification and all as directed by Engr-in-charge.(a) Lumen system efficacy of luminarie should be minimum 100 Lumen per watt.(b) Input voltage range 140 to 270 volts(c) Temp operating range minus 10°C to Plus 50°C (d) Power factor : minimum 0.95 (e) THD : Max 10%(f) CRI : More than 80 and CCT : 5700 K(g) IP rating : IP66(h) IK rating : Minimum IK07(j) Pressure die cast aluminium alloy for housing and heat resistant alear toughened glass (k) Built in potted LED driver of the make as of the luminaire.(l) LED driver should be complete with all protection viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer.(m) Surge protection 10 kV (inbuilt + extended)(n) Lens:- High sfficiency wide angle lens(o) BIS approved fixtures and driver(p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) |
| 36 | Supply and fixing junction box complete with fixing accessories and following specification and all as directed by Engr-in-charge.(a) Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material.(b) Size Min 210 mm x 155 mm x 92 mm.(c) IP protection : IP 66 in accordance with IEC 60529.(d) Internally embedded gasket of plyurethane.(e) Junction Box must meet the provision laid down in IEC 60998-1, IEC-60670-22, IEC-60670-22, IEC-60670-2 to 5 and color according to RAL 9011.(f) The manufacture of junction box shall submit a copy of IEC cerfigicate.(g) Junction box shall be fire retardant and self extigushing in accordance with IEC-60695-2 to 11, DIN VDE 0304 part -3, UL94 V-2 flammability standard. It should be tested at Glove Wire test for 960C.(h) The degree of protection of enclosure against mechanical load shall be in accordance with E N 50298 for IK08.(j) Junction box shall be 4 pole complete with single pole MCB 'C' curve of 6 AMP, rating. |
| 37 | M&L Decorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watt including LED lamp complete all as specified & directed. |
| 38 | Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed by Engr- in- Charge. |
| 39 | Supply & fixing of automatic street light control switch with infrared sensor based Nature Switch & voltage monitoring system (VMS). Nature switch operation should be based on Natural Light Lux level. Required illuminance level for Switching ON is < 30 Lux and for Switching OFF > 10 Lux. The Sensor should also have pert night operation facility of min. 4 hrs. to max 12 hrs. VMS should have Adjustable Over & Under Voltage Trip level and Protection against Phase Loss, Neutral Loss & Phase Reverse. The sensor & VMS along with suitable Power Contractor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Terninate proof and FR grade SMC Junction box conforming to IP54. The circuit should also have provision for Manual Operaation (i.e. sensor & VMS By-Pass option) with 3nos. Contractors, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 16-20 Amps each & Circuit wiring (Copper) of min. 10 sq.mm |
| 40 | Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size complete. |
| 41 | Providing cement concrete type B1 (1;2;4) (20 mm graded aggregate)in precast posts for cable route indicator of size 500x300x100 mm rounded top as directed and grouting in ground with PCC (1;3;6) block of size 350mmx150mmx200mm including 10 mm thick plastering all around of exposed surfaces of post above ground with CM (1:4) and applying two coats cement base paint on plastered surface and writing with synthetic enamel paint in black colour in suitable size like HT Cable , complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for Factory made unreinforced precast concrete cable covers conforming to IS:5820, class HV type 1 size 300x180x40 mm for cable protection complete all as specified |
| 43 | Factory made unreinforced precast concrete cable covers conforming to IS:5820, class LV type 1 size 250x150x40 mm for cable protection complete all as specified.Note for ser No 37 & 38 :- Pre-despatch inspection by rep of accepting officer shall be carried out at factory premises. all arrangement for succesful testing shall be made by contractor with in overall cost quoited. |
| 44 | Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station, 400 KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC A &B on HT Compartment including Civil foundation 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed / Authorized System Integrators of approved OEM are not allowed to supply . Vacuum Interrupter,RMU,LT Switchgear and CSS Enclosure shall be of same make to ensure life cycle optimization.Package substation will have the following equipment :-HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of 2 Nos fixed motorized Load Break switch & 1 no fixed motorized VCB module in SF6 insulated stainless steel enclosure (2.5mm thick, SS304 grade) and with Bus PT metering module . HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 compliant)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder. |
| 45 | SF6 Gas pressure indicator.Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-COCT shall be minimum 60/1A ,2.5VA ,core 1 is 5P20 for protection- 3 nos.CT shall be minimum 60/1A ,2.5VA ,core 2 is calss 0.5 fot metering - 3 nos.2X12V, 26AH Battary with Dual Charger - 1 Set11KV/1.732/110V/1.732 Cast resin Bus PT single phase- 03 setMultifunction meter with Modbus RS485 port & class 0.5 accuracy for each VCB moduleAll modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 Set |
| 46 | TRANSFORMER400 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date) Max Losses @ 50% Load 955W and Max Losses @ 100% Load 2750 W and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be confirming to IS: 2026 and IS: 1180(part-I). amended up to date. (Make of transformer: - NUCON/POWER STAR/DANISH)- One No. Winding Temperature Indicator with Alarm and trip ContactLT PANELLVS PANEL 900 AMPS 4 pole Aluminium BUS BAR (100% FOR PHASES AND 100% FOR NEUTRAL) . ; LT panel made up of 1.5/2 mm thick CRCA sheet |
| 47 | INCOMER FROM TRANSFORMER : Air circuit breaker 4 Pole 630 amps ,415 Volt of breaking capacity not less than 50 KA with electronic/ micro processor release - 01 Nos (Incommer Supply)Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 setOUTGING FROM LT PANELMCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with Adjustable Thermal & Magnetic Range (Optium 2.0) - 01 NosMCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with Adjustable Thermal setting (Optium 2.0) - 01 NosMCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with Adjustable Thermal setting (Optium 2.0) - 01 No MCB TPN 40 AMP for Timer- 01 Nos125KVAR APFC panel with minimum 5 steps as per following tentive steps ( 50KVAR X 1, 25KVAR X 2, 12.5KVAR X 2) through 250A MCCBHard wiring from each equipment inside CSS for scada connectivity (monitoring & control) to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturer's recomandation are included in scope of work. |
| 48 | OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robustconstruction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meter and CSS Enciosure shall be of same make to ensure life cycle optimization. |
| 49 | Taking down carefully copper/ aluminium submain wiring from battan/ conduit from DBs, MCBs etc and making good to distirb surfaces of walls, floors etc |
| 50 | Supply & fix of LED Ceiling /surface/recessed mounted down lighter warm white / white colour,12 to18 watt round/ squre profile,including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete . |
| 51 | S&F recess-mounted LED panel light, 36 Watt (2 ft × 2 ft), CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 with high-efficiency PMMA diffuser and replaceable driver (efficiency > 85%), system lumen efficacy ≥120 lm/W and ≤135 lm/W, suitable for AC 140–270 Volts, 50 Hz, operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 4 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, UGR <19, flicker <5%, and minimum rated life of 50,000 burning hours for LEDs with ≥70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3, and maximum power consumption shall not exceed 36 Watt. The luminaire shall conform to relevant BIS standards and shall bear a valid BIS Trade Mark Certificate. Manufacturer’s name/word mark shall be engraved / embossed / screen-printed on the housing. The item includes all accessories, fixing arrangements, internal wiring with suitable size FRLS PVC insulated copper conductor cables, connections and earthing complete in all respects with minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from a NABL-accredited laboratory, as mandated under BIS for LED luminaires, shall be submitted. |
| 52 | S&F of LED surface-mounted batten light fitting, 20 Watt, CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 with high transmitivity PC diffuser and replaceable metallic driver (driver efficiency ≥85%), system lumen efficacy ≥120 lm/W, suitable for AC 140–270 Volts, 50 Hz, operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 4 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, and flicker ≤5%. The LED shall have a minimum rated life of 50000 burning hours with 70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3 and maximum power consumption shall not exceed the rated wattage. The luminaire shall conform to relevant BIS standards and bear a valid BIS Trade Mark Certificate (TC). Manufacturer’s name/ word mark shall be engraved / embossed / screen-printed on the housing. The item includes internal wiring with suitable size FRLS PVC insulated copper conductor cable, all connections, earthing, fixing accessories, and is complete in all respects with minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from a NABL-accredited laboratory, as mandated under BIS for LED luminaires shall be submitted. |
| 53 | S&F of LED surface-mounted batten light fitting, 2 feet mirror light 10 Watt, CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 with high transmitivity PC diffuser and replaceable metallic driver (driver efficiency ≥85%), system lumen efficacy ≥120 lm/W, suitable for AC 140–270 Volts, 50 Hz, operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 4 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, and flicker ≤5%. The LED shall have a minimum rated life of 50000 burning hours with 70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3 and maximum power consumption shall not exceed the rated wattage. The luminaire shall conform to relevant BIS standards and bear a valid BIS Trade Mark Certificate (TC). Manufacturer’s name/word mark shall be engraved / embossed / screen-printed on the housing. The item includes internal wiring with suitable size FRLS PVC insulated copper conductor cable, all connections, earthing, fixing accessories, and is complete in all respects with minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from a NABL-accredited laboratory, as mandated under BIS for LED luminaires shall be submitted. |
| 54 | Supply and fixing SPN 40 to 63 Amps rating 240V, 10KA 'C' curve rupturing capacity, IS-8828 marked fixing in DBs complete all as specified and directed.Note : (a) Make of the MCB should be the same as that of DB.(b) DBs shall be catered respective items of this schedule |
| 55 | S&F MCCB, four-pole, 125 to 163 Amp, with minimum breaking capacity 16 kA (Icu = Ics), thermally adjustable type with thermal overload setting range from 70% to 100% of rated current, and fixed magnetic short-circuit protection, with spreader links (set of four) for cable connections, suitable cable lugs, nuts, bolts and washers including making all electrical connections complete. |
| 56 | Supply and fixing of modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete. |
| 57 | Supply, installation, and testing of 450 mm (18-inch) Sweep Heavy-Duty Wall-Mounted Air Circulator Fan Air Delivery Minimum 150 m³/minMotor Heavy-duty, continuously rated, 100% copper-wound motor with double ball bearings High-speed operation ranging between 1350 - 1450 RPMPower Supply: 220 - 240 V, 50 Hz, Single Phase ACPower Consumption: Maximum 120 Watts 3 bades 3 aerodynamically balanced heavy-duty aluminium alloy blades Oscillation & Tilt Smooth jerk-free automatic oscillation (approx. 90°) with manually adjustable vertical tilt (approx. 22° to 45°) for targeted airflowSafety & Enclosure: Sturdy powder-coated/chrome-plated closed-mesh guard to ensure safe operation (IP20 rating or higher)Controls: 3-speed rotary/push-button control, or pull cordWarranty: Minimum 1 to 2 years |
| 58 | Supply & Installation of Ceiling Mounted Cassette Type Ventilation Exhaust Fan suitable for False Ceiling integration. 110 mm (4-inch) Air Delivery Minimum 75 m³/min, 1350 - 1400 RPM Power Supply 220 - 240 V, 50 Hz, Single Phase ACPower Consumption Maximum 60 Watts, andincluding delivery duct for out let of air min two year warranty . |
| 59 | Supply and fixing of perforated type 2 mm thick hot dip galvanised GI cable trayof 150mmX50mm depth complete with bend /tee/joints ,coupling plate & nuts bolts etc as required for fixing the tray . |
| 60 | Supply and installation of a standard modular RJ11 (Registered Jack-11) telephone socket, suitable for terminating single or multi-line residential and commercial telephone networks. The socket must facilitate the connection of standard telephone handsets, fax machines, and ADSL/VDSL modems |
| 61 | Supply and installation of a modular RJ45 information outlet. Includes a high-quality Cat6 RJ45 keystone jack, single/dual port face plate, integrated dust shutter, and mounting screw set. Must support both T568A and T568B wiring standards. |
| 62 | S&F of MCB vertical distribution board, (VTPN), 6-way, 415 Volts, fabricated from powder-coated CRCA steel sheet enclosure, recess-mounted, suitable for MCCB incomer up to 160 Amp degree of protection IP-43 and impact resistance IK-09, provided with reversible double door, incorporating 250 A insulated tinned copper bus bar, separate neutral bus bar, earth bar, DIN rail, detachable gland plate, including all internal interconnections, earthing connections and blanking plates for unused ways/spaces complete. |
| 63 | Material and labour for PVC rigid non metallic concealed conduit of size 25 mm dia medium duty, ISI marked ivory colour with all conduit fittings/fixing accessories and terminated in modular metal flush boxes including connection for wi-fi/Lan Connected items and with frame for the surface as per exisitng treatment complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender