Tender For Addition Alteration And Special Repair To Capt S K Chaudhary Dwar (Bldg No P-20J) At Dinjan Mil Stn
Tender Value
29.20 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
14 days left
EMD
58400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration And Special Repair To Capt S K Chaudhary Dwar (Bldg No P-20J) At Dinjan Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n exc 30 cm and averaging 15 cm and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide on plan in soft/loose soil and getting out complete all as specified. |
| 3 | Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and directed. |
| 4 | Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point.complete all as specified and directed. |
| 5 | M & L for demolition of cement concrete (reinforcement) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 6 | M&L for plain cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 7 | Use and waste of form work to sides of concrete foundations footings bases of columns and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed. |
| 8 | M&L providing reinforced cement concrete type B1 (1:2:4) (Nominal mix) using 20 mm graeded stone aggregate as in foundation ,including rafts,footings foundation beams , plinth beams, bases of columns etc ,basement slab ,underreamed piles and mass concrete complete all as specified and directed. |
| 9 | M&L providing reinforced cement concrete type B1 (1:2:4) (Nominal mix) using 20 mm graeded stone aggregate as in columns ,pillars piers ,posts and struts complete all as specified and directed. |
| 10 | Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and directed. |
| 11 | Use and waste of form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) fair finished surfaces of concrete flat complete all as specified and directed. |
| 12 | M&L providing reinforced cement concrete type B1 (1:2:4) (Nominal mix) using 20 mm graeded stone aggregate as in roof slabs supported on walls surfaces of concrete flat complete all as specified and directed. |
| 13 | M&L MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending and binding with MS wire annealed not less than 0.9 mm dia complete all as specified and directed. |
| 14 | M&L for Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and includeing mild steel wire (annealed) not less then 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone on 15mm thick screedbed in CM 1:3 including grinding and polishing complete all as specified and directed.. |
| 16 | M&L for 20mm thick granite (of any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixure of pigment to match the shade of granite complete all as specified and directed. |
| 17 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 18 | M&L for brick work in cm 1:6 straight on curved on plan exc 6m mean radius using sub class 'B' brick complete all as specified and directed. |
| 19 | M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls complete all as specified and directed. |
| 20 | M&L for randering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 and rendering is to be finish even and smooth with out using extra cement complete all as specified and directed. |
| 21 | M&L for randering 15 mm thick on other than fair faces of brick work or concrete surface in CM 1:4 and rendering is to be finish complete all as specified and directed. |
| 22 | M&L for preparation of new plastered surface of wall Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm thick plaster of paris putty on new surfaces complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surfaces of walls & applying two coat of distemper oil emulsion over 1mm thick wall care putty birla white or JK & over one coat of chalk whiting priming paint complete all as specified and directed. |
| 24 | Demolition of cement concrete in ground floor n exc 15 cm thick (un reinforced) complete all as specified and directed. |
| 25 | M&L for hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stone/boulders complete all as specified and directed. |
| 26 | M&L for PCC 1:2:4 type B2 (Using 40mm graded stone aggregate) 75mm thick as in floor laid in panels and finished top even and fair without using extra cement complete all as specified and directed. |
| 27 | M & L 75 mm thick PCC type D-2 1:4:8 ( using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 28 | Supply only Sand cushioning for laying of paver block complete all as specified and directed. |
| 29 | M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 80mm thickness ,M -40 grade with grey cement with pigment over 50mm thick sand cusion layer complete all as specified and directed Sand cushioning shall be measured and paid separately) |
| 30 | M&L for PCC 1:3:6, type C1, using 20mm graded aggregate as in coping complete all as specified and directed. |
| 31 | M&L Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed. |
| 32 | M & L for preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed. |
| 33 | S&F PVC insulation panels with EPS stuck to 1mm plain PVC sheet of 10mm th suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed. |
| 34 | M&L for hanger 6mm dia GI upto 1200mm length 40 x 3 mm size complete all as specified and directed. |
| 35 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet o.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and directed |
| 38 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to grade Fe 410-W (Grade E-250) complete all as specified and directed. |
| 39 | S & F mild steel Rolled Joist channel angle or T section as in vertical post fixed independtly with out connecting plates etc (cut to ordinary length i.e withing 20mm of the length indicated in grade Fe 410-W (Grade E-250) complete all as specified and directed. |
| 40 | S & F MS framed work as in doors / gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, using steel Fe - 410W (Gde-E-250) quality 'B. Door etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed. |
| 41 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc gde Fe-410 W (Gde E- 250) quality A complete all as specified and directed. |
| 42 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and similar work complete all as specified and as directed. |
| 43 | M & L two coat of synthetic enamel paint over one coat of red oxide zinc chrome steel and iron surfaces of any descriptionh, over 10cm in widyh or girth not other wise described including preparation of surfaces complete all as specified and directed. |
| 44 | M&L for chromium plated brass letter 45 cm long and 7.5 cm width and 2.5 cm thick fixing wall on granite slab with approved adhesive for letter \\"CAPT S K CHOUDHARY DWAR\\" complete all as specified and directed. |
| 45 | Supply and fixing of ALSTRONG or equivalent aluminium composite panel with approved shade of 4 mm thick including scafolding , aluminium angles , channels etc, including steel angles tapping screen and sealing compound all as specified and directed . |
| 46 | M&L for decorative ceramic outdoor wall tiles in vertical surface of Size 600x300x10mm thick over 10mm thick screed bed in CM 1:3 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 47 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 48 | S&F 110 mm PVC (SWR) bends complete all as specified and directed. |
| 49 | Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed . |
| 50 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender