Tender For Repair & Maintenance Of Chc Building At Nirmand. (Sh:- Construction of Septic Tank Andrepair Of Residential Quarters For Chcstaff) Under Deposit Work
Tender Value
18.23 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
6 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Chc Building At Nirmand. (Sh:- Construction of Septic Tank Andrepair Of Residential Quarters For Chcstaff) Under Deposit Work
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation for foundation of structures upto all depth as per drawing and technical specification clauses 305.1 including setting out, construction of shoring and bracing , removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per direction of The Engineer-In-Charge complete. |
| 2 | Providing and Laying plain cement concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 3 | Stone masonry work in cement mortar in sub-structure complete as per drawing and technical specifications Clause 702, 704, 1202 & 1203. Randaom rubble masnory in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In- Charge complete |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. Flat surfaces such as soffits of suspended, floors, roofs,landing & the like floor etc. 200mm in thickness. |
| 5 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto floor |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. Steel will be supplied by the department free of cost) |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level. Cement mortar 1:4 (1 cement :4 coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 8 | Cement concrete flooring 1:2:4 (one cement: two coarse sand: four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm (forty millimetre) thick with 20 mm (twenty millimetre) nominal size stone aggregate including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 9 | Stone soling dry hand packed under floors including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In- Charge complete |
| 10 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 11 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimetre) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 12 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. 110mm (one hundred ten millimetre) diameter |
| 13 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. 110mm (one hundred ten millimetre) diameter |
| 14 | Providing and fixing PVC reducer ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. 110mm (one hundred ten millimetre) diameter |
| 15 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within all lead of including carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 16 | Providing and fixing 0.62mm (Zero point six two millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) microns primer coating to back coast of polyester of 5(five) microns over 5 (five) microns primer coating including fixing with screws, pre-painted iron J or L hooks, bolts and nuts 6mm(six millimetre) diameter with pre-painted limpet and rubber washer including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 17 | Providing and fixing false ceiling at all heights with 6 MM (six millimetre) THICK EVEREST BOARD reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm (five hundred ninety five X five hundred ninety five millimetre) of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (zero point five zero) (minimum) as per IS 8225:1987, Light reflectance of 85% (eighty five percent) (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100% one hundred percent), thermal conductivity < 0.043 (less than zero four three) W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanized iron section of 0.40 mm (zero point four zero millimetre) thick on Silhouette profile, rotary stitched double webbed white with 6 mm (six millimetre) reveal profile (white/black),comprising of main-T runners of size 15x42 mm (fifteen X forty two millimetre) of length 3000 mm three thousand millimetre), cross - T of size 15x42 mm(fifteen X forty two millimetre) of length 1200 mm twelve hundred millimetre) and secondary intermediate cross-T of size 15x42 mm(fifteen X forty two millimetre) of length 600mm (six hundred millimetre) to form grid module of size 600 x 600 mm six hundred X six hundred millimetre), suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams/sqm)(at the rate of eighty gram per square metre) i.e. 50 mm (fifty millimetre) long, 8 mm (eight millimetre) outer diameter M-6 dash fasteners, 6 mm (six millimetre) diameter fully threaded hanger rod up to 1000 mm (one thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm (eighty five X twenty five X two millimetre). Galvanized iron perimeter wall angle of size 22x19x0.40 mm (twenty two X nineteen X zero point four zero millimetre) of length 3000 mm (three thousand millimetre) to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm (four hundred fifty millimetre) center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 18 | Providing Wood work in frames of doors, windows, clerestory windows and othersnframes, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastners shall be paid seprately) Deodar wood including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 19 | Providing Wood work in trusses and trussed purlin in building and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastners shall be paid seprately) Deodar wood including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 20 | Providing and applying white cement based putty ofaverage thickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface to preparethe surface even and smooth complete including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 22 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 23 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931: 15 mm (fifteen millimetre) nominal bore including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 24 | Providing, laying and jointing half round glazed stonewarepipes classSP-1with stiff mixtureof cementmortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete 300 mm dia pipe |
| 25 | Providing and Laying plain cement concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 26 | Finishing walls with 100% (one hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.: New work (Two or more coats applied @ 1.43 litre/ 10 sqm (at the rate of one point four three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (at the rate of zero point nine zero litre per ten square metre). : New work (Two or more coats applied @ 1.43 litre/ 10 sqm (at the rate of one point four three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (at the rate of zero point nine zero litre per ten square metre) Asian Paints including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 27 | Painting with synthetic enamel paint of approved brand, Shade and manufacture to give an even shade :Two or more coats on steel work including curing and carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 28 | Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of nominal thickness 5mm (weight not less than 12.5kg/sqm) including carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 29 | Providing and fixing sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm (forty millimetre) C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm (six hundred X four hundred fifty X two hundred fifty millimetre) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 30 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with cistern and “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge |
| 31 | Providing and fixing white vitreous china European type W.C. pan with cistern and with 100 mm sand cast Iron P or S trap, , including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 17.1.1 including carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. |
| 32 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per direction of The Engineer-In-Charge complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender