Tender For Smart Periodical Services In For Dept Of Chinese Language, Brumes Language, English Language, Dept Of Map Craft, Hrdc, Dept Of Education Flw (S), Flw (N), It Cell, Mapps, Amn Point, Community Halland Religious Institutes And Other Dept At
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical Services In For Dept Of Chinese Language, Brumes Language, English Language, Dept Of Map Craft, Hrdc, Dept Of Education Flw (S), Flw (N), It Cell, Mapps, Amn Point, Community Halland Religious Institutes And Other Dept At Aec Trg College And Centre Pachmarhi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Complete removal of existing treatment on wall(Internal/External) /roof projections including facis, cornics etc(Internal surfaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc) & (External surface by Jet washer) by skilled labour complete all as specified and directed by Engineer-in-Charge. |
| 2 | M & L for providing and applying minimum 1mm thick wall care putty over prepared surface and rubbing it with mechanical sander (having mechanical vaccum mechanism) to achive the surface even and smooth for further application of finishes complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & labour for applying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied complete all as specified and directed by Engineer-in-Charge. Note- 1. Application of Primer and emulsion to be carried out through air less spray machine (Mechanical means). 2. Wall care putty (if required at site before application of above painting in certain portion) shall be done and same shall be measured and paid seperately under serial item No 02 |
| 4 | M & L for applying Two or more coats of Acrylic distemper (ready Mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat primer complete, as per manufacturer's specification complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means)2. Wall care putty (if required at site before application of above painting in certain portion) shall be done and same shall be measured and paid seperately under serial item No 02 |
| 5 | M & L for preparation of old treated surfaces of ceiling and applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 6 | M & L for preparation of old treated steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthectic enamelled paint complete all as specified and directed.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 7 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthectic enamel paint complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 8 | M & L for preparation of old treated steel surfaces of any description exceeding 10cm width or girth and applying two coat of synthectic enamelled paint complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 9 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthectic enamel paint complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 10 | M&L preparation of old decorated surfaces of wall and applying two coat of oil bound distemper including filling of minor nail hole with wall putty complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 11 | M&L preparation of old decorated surfaces of wall and applying one coat of oil bound distemper including filling of minor nail hole with wall putty complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 12 | M&L for preparation of old decorated surfaces with white cement base putty in patches as required and applying one coat of exterior weather proof water base emulsion paint of approved make on walls complete all as specified & directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 13 | M&L for preparation of old decorated surfaces with white cement base putty in patches as required and applying two coat of exterior weather proof water base emulsion paint of following make on walls complete all as specified & directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 14 | M & L applying two coats of cement based paint on wall surface including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge.Note- 1. Application of Primer and distemper to be carried out through Roller (Mechanical means) |
| 15 | M & L for Washing, rubbing down and stopping of distempered and painted surfaces for application of Acrylic emulsion paint over prepared wall surfaces complete all as specified and directed by Engineer-in-Charge. |
| 16 | Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | M & L for rendering 10mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 18 | M & L for rendering 15 mm thick in two layers of 10+5mm in CM 1:4 mixed with Pidi Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @ 200ml/bag complete all as specificed and directed by Engineer-in-Charge. |
| 19 | Removal of plants/trees of girth n exe 30 cm from roof/sides, external walls of bldg, chajjas, wall junctions, junctions of rain watr/ CI soil/waste pipe junction including taking out the roots entered in wall/slab surfaces and making good the disturbed surface using PCC (1:2:4) type B-0 or cement mortar (1:2) including the GI/CI/PVs pipe joints which were damage during cutting/taking out process to match with the existing and finishing the distrurbed surface match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed by Engineer-in-Charge.Note (i) Any CI/AC/PVC pipes or pipe fitting damage duing the process of work shall be replaced by new one without any extra cost of the department. the decision of the GE on this regard shall be final and binding. (ii) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 K M all as directed by engineer-in- charge. (iii)For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall. (iv) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same |
| 20 | Supply and applying crack filler for filling of cracks on wall surfaces by cutting V-groove in crack width upto 10mm and filling it with crack filler to make surface even and smooth complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender