Tender For Repairing/Painting Of 05 Nos.Ug/Pg/Phd Laboratory, 03 Chambers, 01 Office Room, Passage, 03 Nos. Store Room & Washroom, Repairing Of Waterproofing Works And Minor Electrical Works Of Department Of Pharmacolofy & Toxicology, College Of Vete
Tender Value
22.34 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
44700
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing/Painting Of 05 Nos.Ug/Pg/Phd Laboratory, 03 Chambers, 01 Office Room, Passage, 03 Nos. Store Room & Washroom, Repairing Of Waterproofing Works And Minor Electrical Works Of Department Of Pharmacolofy & Toxicology, College Of Veterinary Science And Animal Husbandry, Birsa Agricultural University, Ranchi.
BOQ
| Sl. No. | Item Description |
| 1 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 3 | Taking down old door and window shutters including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 4 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 5 | Providing 12mm thick plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 6 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 7 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floors and taxes all complete as per building specification and direction of E/I |
| 8 | providing and laying in position cement concrete of specified grade excluding the cost of centerin and shuttering all work upto plinth level. 1:2:4( 1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size. |
| 9 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 10 | Providing two coats of ready mixed paint of approved shade and made over steel surface including cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 11 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 12 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and royalty all complete as per building specification and direction and of E/I |
| 13 | Providing and laying doublecharged vitrified tiles in different size 600x 600 mm all complete. |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110MM DIA |
| 15 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Band 110 mm |
| 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Coupler |
| 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain) |
| 18 | a)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction 15 mm dia pipes |
| 19 | b) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction 25 mm dia pipes |
| 20 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required Including the costof EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . 4.0 mm(Cost of aluminium snap beading shall be paid in basic item): |
| 22 | Supplying 4 mm thick ACP |
| 23 | Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50 mm dia wire |
| 24 | Supply, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I (Where materials is not supplied by the deptt.) |
| 25 | Supply, fitting & fixing 35 mm thick solid core type non decorative single leaf flush shutter in doors all complete as per direction of E/I |
| 26 | Taking down ceiling (any type) and refixing them after repair with department material, within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 27 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I |
| 28 | Labour for cutting old mosaic or precast terrazzo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I |
| 29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 30 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 31 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm |
| 32 | Bib Cock long thread |
| 33 | Pillar cock lomg neck |
| 34 | Soap Container |
| 35 | Towel ring |
| 36 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 37 | Removal of old tarfelt and disposal of debris with all leads complete job as per direction of E/I. |
| 38 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystallineslurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm. |
| 39 | Providing and laying APP (Atactic Polypropylene Polymer) modifiedprefabricated five layer 3 mm thick water proofing membrane, blackfinished reinforced with non-woven polyester matt consisting of acoat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all jointsetc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Jointstrength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300 |
| 40 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 41 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 42 | Cutting of trees including cutting of trunks, branches and removal(cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable materials with all lifts and upto a lead of 1000 mtrs. (a) Girth from 300 mm to 600 mm |
| 43 | Cutting of trees including cutting of trunks, branches and removal(cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable materials with all lifts and upto a lead of 1000 mtrs. (b) Girth from 600 mm to 900 mm |
| 44 | a) Sand Lead 22 Km |
| 45 | b) Stone Chips Lead 22 KM |
| 46 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2x2.5sq.mm + 1x 2.5 sq.mm (for P.P) |
| 47 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2x4.00sq.mm + 1x 4.0 sq.mm (for P.P) |
| 48 | 5/6 amps,one way switch |
| 49 | 5/6 amps,3 pin socket |
| 50 | 15/16 amps ,one way switch |
| 51 | 15/16 amp,6 pin socket outlet |
| 52 | Supplying and fixing following size /module /GI box along with modular base and cover plate for modular switches in recess etc as required. 6 module(78 mmX 205 mm X50 mm) |
| 53 | SITC of following rating recess/surface mounted LEDround/ square shape down light luminaries with pressure die cast housing for single phase supply voltage. Luminaries shall confirm to IS:10322 part-5/section -2 with all necessary accessories as required. 18/20 W LED round down light |
| 54 | SITC of following rating recess/surface mounted LEDround/ square shape down light luminaries with pressure die cast housing for single phase supply voltage. Luminaries shall confirm to IS:10322 part-5/section -2 with all necessary accessories as required. 20/22 LED tube light |
| 55 | 1200mm(48’’)Ceiling fan |
| 56 | Supplying and fixing of stepped type electronic fan regulator on the existing modular plate &switch box including connection but excluding modular plate etc as required. |
| 57 | Add GST @ 18% |
| 58 | Add LWF @1 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender