Tender For Leak Treatment Of Roof And Washrooms, Internal Repair/Painting And Application Of Resin Based Texture On Exterior Surface With Painting In Girls Hostel Of T M Agriculture College, Godda Under Birsa Agricultural University, Ranchi.
Tender Value
63.99 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
6 days left
EMD
1.28 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Leak Treatment Of Roof And Washrooms, Internal Repair/Painting And Application Of Resin Based Texture On Exterior Surface With Painting In Girls Hostel Of T M Agriculture College, Godda Under Birsa Agricultural University, Ranchi.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 3 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I |
| 4 | Taking down old door and window shutters including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 5 | Taking down chaukhats in windows including stacking serviceable materials within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 6 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plint level:1:2:4 (1 Cement : 2 Coarse sand (Zone-III) : 4 graded stone aggregate 20mm nominal size) |
| 8 | Providing designation 75A brick work in C.M. (1:6) in s/s with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I |
| 9 | Providing 12mm thick plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 10 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 12 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I |
| 13 | Supply, fitting & fixing thick solid core type non decorative single leaf flush shutter in doors all complete as per direction of E/I |
| 14 | Brass hanging type door stopper 150 mm |
| 15 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 16 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystallineslurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm. |
| 17 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete inall respect as per the direction of Engineer-in-Charge. |
| 18 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 19 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 20 | Providing two coats of ready mixed paint of approved shade and made over steel surface including cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 21 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and royalty all complete as per building specification and direction and of E/I |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 23 | Providing 150 mm wide brick drain in C.M (1:6) including all taxes and royalty all complete as per building specification and direction and of E/I |
| 24 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. |
| 25 | S/F/F M S Grill made of 20 x 6 mm M.S. Flat all complete as per building specification and direction and of E/I |
| 26 | Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled ‘Z’ and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm MS lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm size including cost of oxidized iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminium beades and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all stroys and taxes all complete as per building specification and direction of E/I |
| 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,(Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade ccording to IS: 1868, Minimum anodic coating of grade AC 15) |
| 28 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness |
| 29 | Supplying and fixing ACP 4 mm thick |
| 30 | Bib Cock long thread |
| 31 | Pillar cock lomg neck |
| 32 | Towel rail |
| 33 | Shower |
| 34 | Connection pipe |
| 35 | Soap Container |
| 36 | Mirror 600x450mm size |
| 37 | S/F/F PVC Pipe for hot and cold water with fittings all complete job Internal 15 mm dia |
| 38 | External portion 25 mm dia |
| 39 | S/F/F PVC 110 mm Pipe RWD) all complete job- |
| 40 | Pipe clip |
| 41 | Supply, fitting and fixing 4mm glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I |
| 42 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the directionof Engineer -in-Charge. |
| 43 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia |
| 44 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other S.S.approved make with 100mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S.equivalent make, complete with all fittings,C.I. or C. C.brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (A) 580 mm. long 10 ltr low PVC Cistern |
| 45 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 46 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mmwith a pair of 15 mm C.P. brass pillar taps |
| 47 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab upto 0.50 sqm |
| 48 | Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 49 | a) Sand Lead 22 Km |
| 50 | b) Stone Chips Lead 22 KM |
| 51 | c) Bricks Lead 8 Km |
| 52 | Wiring for light/fan point/exhaust fan point with 1.5 sq.mmFR PVC insulated copper conductor single core cable in surface/recessed PVC conduit ,with modular switch,modular plate suitable G.I boxetc as required.(for toilet)6 unit X10Pt Group A |
| 53 | Wiring for circuit/submain wiring along with earthwire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 54 | Wiring for circuit/submain wiring along with earthwire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. 2 X 4.0 sq.mm + 1 X 4.0 sq.mm earth wire |
| 55 | a)Supplying & fixing of following modular type switch/socket on the existing modular plate and switchbox including connection etc as required 5/6 Amp switch |
| 56 | b)Supplying & fixing of following modular type switch/socket on the existing modular plate and switchbox including connection etc as required 5/6 Amp socket |
| 57 | c)Supplying & fixing of following modular type switch/socket on the existing modular plate and switchbox including connection etc as required electronic fan regulator,deluxe |
| 58 | a)Supplying & fixing of following modular type switch/socket on the existing modular plate and switchbox including connection etc as required 15/16 Amp switch |
| 59 | b)Supplying & fixing of following modular type switch/socket on the existing modular plate and switchbox including connection etc as required 15/16 Amp socket |
| 60 | Supplying and fixing batten/angle holder including connection etc. as reqd |
| 61 | Providing and fixingfollowing capacity bus bar chamber with 4 strip of suitable length 300 mm made of coppperfor following capacitycomplete with all accessories includingconnection etc as required 200 amps |
| 62 | Providing and fixing following capacity 4 pole ON/OFF load changeover switches with side handle operation ,in sheet steel enclosurein existing metal board including drilling holes in metal board making connection etc as required 100 Amps |
| 63 | Supplying and fixing of following LED fittings complete with connection as required. Make- Bajaj/jaguar/ C&S or equivalent 20/22 watt LED BATTEN |
| 64 | supply and fixing of 12\\" (300mm) metal exaust fan |
| 65 | Providing PVC insulatedPVC sheatedheavy duty armoured electrical cable with aluminium conductorfor working voltageup to and including 1100 volts 120 sq.mm ,3.5 core |
| 66 | SITC of following rating LED Flood lighting luminaries with pressure die cast housingand toughned glass cover (ip66 protection ) for supply voltage 100-270 V AC ,50Hz.Luminaries shall be confirm to IS :10322 part-5/section -5 and shall be complete with all necessary accessories aas required. 50/60 W LED Flood Light |
| 67 | Supplying,Installation,testing and commissioning of following size ceiling fan 3 Blades confirming to IS :374:2019 including wiring the down rod s of standard length (upto30cm)with 1.5 sq.mm FRPVC insulated copper wire suitable for 230V 50 Hz,single phase supply etc complete as required.(for senate hall). 1200mm(48”)Ceiling Fan |
| 68 | Supplying and fixing of 6 amp to 32 amp rating 240 V 10 KA B curve MCB suitable for inductive load of following poles 6/32 Amp. |
| 69 | 48 \\" Ceiling fan rewinding with ball bearing all complete |
| 70 | Add GST @ 18% |
| 71 | Add LWF @1 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender