Tender For Development Of Left Side Garden Area Along With Repairing And Paiting Of Existing Boundary Wall For Head Quarter C Us Bau, Kanke, Ranchi.
Tender Value
7.95 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
6 days left
EMD
16000
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Left Side Garden Area Along With Repairing And Paiting Of Existing Boundary Wall For Head Quarter C Us Bau, Kanke, Ranchi.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation Trenches in hard soil (vide classification of soil item -B) all complete as per approved design, building specification and direction of E/I |
| 2 | Stone crusher dust fine than 3 mm with not more than 10% passing sieve at quarry |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 4 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 5 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) cum 7210.55 |
| 7 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 8 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 9 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I |
| 10 | Providing 12mm thick plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 11 | Providing two coats of synthetic enamel paint & providing primer one coat of red lead paint approved shade and made over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 13 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 14 | SITC of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal acrylic diffuser on existing pipe including connection with 1.5 sq.mm copper conductor etc all complete as required.(Garden-12) 10/15 W LED Post top lamp clear |
| 15 | Supplying following sizes and core PVC/XLPE insulated PVC sheated, heavy duty , electric cable with for working voltage up to and including 1100 volt. 16sq.mm 2 core |
| 16 | Supplying following sizes and core PVC/XLPE insulated PVC sheated, heavy duty , electric cable with for working voltage up to and including 1100 volt. 16sq.mm 4 core (b/b to panel) |
| 17 | Laying of one number PVC insulated and PVC sheated /XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm direct in ground including excavation,and refilling the trench etc as required but excluding sand cushioning and protective covering. |
| 18 | Supplying and fixing of 6 amps to 32 amps rating ,240 volt ,10 KA B curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection ,testing and commissioning etc as required. 6/32 amps ,Single pole |
| 19 | Supply and fixing of 50mm dia medium class GI pipes as required. |
| 20 | Supply and fixing of Cable junction box as required. |
| 21 | Cement concrete 1:2:4 (1cement :2 coarse:4 graded stone aggregate (20 mm nominal size) |
| 22 | Supplying and drawing following sizes FR PVC insulated copper conductor ,single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 core 2.5 sq.mm FR PVC insulated copper wire |
| 23 | Outdoor stand mounted Feeder Panel with 32 amp TP&N ,MCB incomer 45 ampTP contactor automatic switching of luminaries ,power tool control incommer outgoing terminal atc as required. |
| 24 | 80 mm dia Earthing Electrode 3 mtr length & backfill compound chemical 4 Bag (per bag 25 Kg) |
| 25 | Sand lead 22 Km |
| 26 | Stone chips lead 22 KM |
| 27 | brick Lead 8 KM. |
| 28 | Stone dust lead 22 KM |
| 29 | EARTH (LEAD 1 K.M) |
| 30 | Add GST @ 18% |
| 31 | Add LWF @1 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender