Tender For Certain Roof Repairs For Md And Otm Accn In C-1 Sector In Aor Of Age B&R-Ii Under Ge (South) Ambala Cantt.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Roof Repairs For Md And Otm Accn In C-1 Sector In Aor Of Age B&R-Ii Under Ge (South) Ambala Cantt.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement corrugated or semi-corrugated sheets including AC ridges etc., as in roof covering, complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer, complete all as specified and directed by Engineer in charge. |
| 3 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer, complete all as specified and directed by Engineer in charge. |
| 4 | Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and directed by Engineer-in-Charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engr-in-Charge. |
| 6 | Supply and fixing of rolled mild steel in roof trusses (framed), trussed rafter/purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,hallow sections etc fixed in position, conforming to Fe-410-W (Gde 250),complete all as specified and directed by Engineer-in-Charge. |
| 7 | Disconnecting existing tanks exc 250 and n.exc 500 ltrs, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion etc complete after cleaning incl writing date of cleaning in letter/ number 100mm high, complete all as specified and directed by Engineer-in-Charge. |
| 8 | All as per item No 07.00 here in before but capacity exc 500 ltrs but n. exc 1000 ltrs, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for Cutting and uprooting of grass vegitation over roof surfaces , roughning old bricks tile/concrete surfaces by picking sweeping clean wire brushing and washing down with water to remove dust etc incl flashing and junction of parapits filling damaged /open joints in CM (1:3) and applying neat cement slury 3.00 kg/sqm complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for 40 mm thick (average thickness) PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) with WPC as in roof padding, levelling course, and finishing top surface even and smooth (without using extra cement) to recieve APP membrane complete all as specified and directed by Engineer-in-Charge. Note: WPC shall be measured and paid for separately. |
| 11 | Material and labour for water proofing treatment with following application over roofs surface complete, all as specified and as directed :-(i) Applying bituminous primer at the rate of 0.4 Litres/Sqm as per IS 3384-1986 on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated. (ii) Applying one coat of blown type bitumen of grade 85/25 as binding material conforming to IS-73 at the rate of 1.2 Kg/Sqm. (iii) APP based polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, minimum 3 mm thick black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing complete.(iv) Applying one coat of bituminous aluminium paint over top surfaces of APP membrane. Note :- The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009) |
| 12 | Material and labour for providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges, Type B1 1:2:4 (using 20 mm graded aggregate), complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fixing (in repair), water storage tank 500 litre capacity HDPE double layer fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut , screwed and suitable for iron pipe 20 mm bore, including removing existing tank, complete all as specified and directed by Engineer-in-Charge. |
| 14 | All same as item No 13.00 here in before but of 1000 litre storage capacity, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply only integral water proofing compound, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Demolition and breaking up of drain pipie /PVC (SWR)/ AC or reinforced concrete ) pipes any length including bends etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and fixing 110mm dia PVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 18 | Supply and fixing 75mm dia PVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge. (Note- Rubber rings for pipes and fittings shall confirm be to IS 5382-1985) |
| 19 | Supply and fixing 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking down cement plaster on brick wall/concrete surfaces etc including raking out joints hacking for key scrubing down with water etc of any thickness of any description complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surface of any description, finished the surface even and fair (without using extra cement) complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coat of cement base paint over alkaline resistant primer complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material and labour for two coat of cement base paint on old decorated plastered or unplastered surfaces of walls, chajjas, balcony, facias etc after brooming down or steel wire brushing,scraping down smoke soot , moulds, moss and effloroscent salts, trading oil and greasy spots etc.over a coat of alkaline resistant primer, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fixing of PVC false ceiling consisting of 600 mm x 600 mm, 5mm (+ 0.25) thick plain embossed PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1\\" x 1\\" (25 mm x 25 mm, 1 mm thick) in square pattern of grid sizes of 2' x 2' (600 mm x 600 mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1\\"X1\\" (25mmX25mm, 1mm thick) Angles etc. complete as per direction of Engineer - In- Charge, Manufacturer's specification and drawing including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified and directed by Engineer-in-Charge. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc and making good to match with existing surface effected for this area etc complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply and fixing in repair semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos/PVC/ metal / Gysum sheet false ceiling textile coverings including frames (if any) and cover fillets complete complete all as specified and directed by Engineer-in-Charge. |
| 26 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material and labour for Brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:4 (old size brick) complete all as specified and directed by Engineer-in-Charge.NOTE: - Old bricks obtained from demolition shall be re used. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work. |
| 29 | Material and labour for 75mm thick PCC 1:3:6 type C-1, (using 20mm graded stone aggregate) as in platform to PVC water tanks finished even and smooth without using extra cement including demolition of existing plate form any type complete all as specified and directed by Engineer-in-Charge. |
| 30 | Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removal to store yard complete all as specified and directed by Engineer-in-Charge. |
| 31 | Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removal to store yard complete all as specified and directed by Engineer-in-Charge. |
| 32 | Refixing old serviceable steel water tubing of 15 mm bore, connection in new or old position, any grade, including supply and fixing of new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required , including taking down of old tubing as existing at site and removal, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Refixing old serviceable steel water tubing of 20 mm bore,connection in new or old position, any grade, including supply and fixing new fittings as required, fixed to walls or laid in floors/roofs etc including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required , including taking down of old tubing as existing at site and removal, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fixing of galvanised steel tubing, 15mm bore, `medium grade, with all fittings and fixed to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fixing of GI tubing, 20mm bore, `medium grade, with all fittings and fixed to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fixing in repair of 15 mm bore Gun-Metal, globe or gate valves , with iron wheel head,screwed down both end for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 37 | NOTE:- Amount of credit of Rs. 46,445.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender