Tender For Construction Of Boundary Wall Of Science Centre At Kajalgaon, Chirang
Tender Value
35 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
16 days left
EMD
70000
Bank guarantee accepted
Document Fee
1050
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chirang → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Boundary Wall Of Science Centre At Kajalgaon, Chirang
BOQ
| Sl. No. | Item Description |
| 1 | Boundary Wall Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains ( not exceeding 1.5mm in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. 2.8.1 All kinds of soil |
| 2 | Brick on edge flooring with bricks of class designation 7.5 on a bead of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks 11.1: 1:4 (1cement: 4 coarse sand). |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:2:4 (1cement: 2 coase sand (Zone-III): 4 graded stone aggregate 20mm nominal size). |
| 4 | Steel reinforcement for RCC work including straigthening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6. Thermo mechanically treated bars of grade Fe-500D or more. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1. Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | 5.9.5. Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 7 | 5.9.6:- Columns, pillars, piers, abutments, posts and struts. |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding cost of centering, shuttering, finishing and reinforcement- All work upto plinth level. 5.1.3 1:2:4 (1cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, exluding cost of centering, shuttering, finishing and reinforcement. 5.2.2 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size). |
| 10 | Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS: 12894 in super-structure above plinth and upto floor V level. 6.45.2: Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 11 | 15mm cement plaster on rough side of single or half brick wall of mix 13.5.1: 1:4 (1 cement: 4 coarse sand) |
| 12 | Applying one coar of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 13 | Finishing walls with textured exterior paint of required shade. |
| 14 | Structural steel work in single section, fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 15 | Entrance Gate Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains ( not exceeding 1.5mm in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. 2.8.1 All kinds of soil |
| 16 | Brick on edge flooring with bricks of class designation 7.5 on a bead of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks 11.1: 1:4 (1cement: 4 coarse sand). |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:2:4 (1cement: 2 coase sand (Zone-III): 4 graded stone aggregate 20mm nominal size). |
| 18 | Steel reinforcement for RCC work including straigthening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6. Thermo mechanically treated bars of grade Fe-500D or more. |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1. Foundations, footings, bases of columns etc. for mass concrete. |
| 20 | 5.9.5. Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | 5.9.6:- Columns, pillars, piers, abutments, posts and struts. |
| 22 | Providing and laying in position specified grade of reinforced cement concrete, excluding cost of centering, shuttering, finishing and reinforcement- All work upto plinth level. 5.1.3 1:2:4 (1cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20mm nominal size) |
| 23 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, exluding cost of centering, shuttering, finishing and reinforcement. 5.2.2 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size). |
| 24 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 25 | Land Development Excavating, supplying and filling of land earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, side of foundation etc. complete. |
| 26 | Display Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender