Tender For Restoration Of Rain Damages Of Lwss Dharja Tehsil & Distt. Solan. (Sh:- Construction Of Filter Bed).
Tender Value
22.99 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
2 days left
EMD
46000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Lwss Dharja Tehsil & Distt. Solan. (Sh:- Construction Of Filter Bed).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in all type of soil such as pickwork jumper work blasting work Kankar moorum, shingles including decomposed soft and hard rock etc.upto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts & as per directed of the Engineer in-charge. |
| 2 | Providing & laying cement concrete 1:3:6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring & shuttering in Foundation & plinth complete in all respect upto all leads and lifts & as per directed of the Engineer in-charge. |
| 3 | Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:- |
| 4 | in foundation footing etc. complete in all respect. |
| 5 | in wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level complete in all respect. |
| 6 | Prov. form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. so as to give a rough finish i/c centring, shuttering, strutting & propping etc. height of propping & centering below supporting floor to ceiling not exceeding 4mtr. & removal of same for insitu rainforceed concrete and palin concrete work in:- |
| 7 | Vertical surfaces such as walls (any thickness), partitions and the like including attached pillasters, buttress, plinth and string courses and the like complete in all respect. |
| 8 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. up to 200mm in thickness complete in all respect. |
| 9 | Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3 (1cement : 3 sand) complete in all respect. |
| 10 | Providing and laying cement concrete 1:2:4 (1cement:2sand : 4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in Suspended floor, roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers up to floor two level. |
| 11 | Providing tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. |
| 12 | Providing a suitable computing device for smooth functioning, monitoring and effective implementation of ongoing government schemes, providing a suitable for efficient data management, preparation of report and presentations, MIS operations, virtual meetings, online portal entries, documentation and coordination with field staff and higher authorities, ensuring timely supervision, transparency and effective discharge of official duties as per administrative requirements. |
| 13 | Providing, laying, jointing, testing and commissioning in trenches galvanised mild steel tube of following dia including providing and fixing tube fittings such as reducer increasers, sockets, union, tees, bends etc. where ever required (earth work in trenches to be measured and paid for separately) and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 14 | 80 mm dia (light grade) |
| 15 | 100 mm dia (heavy grade) |
| 16 | Providing & fixing CI Sluice valve (with hand wheel) as per IS : 780-1984 class-I upto 300 mm dia. (i/c brass spindle & as per 2906-1984 class-II for 300 mm dia) complete with bolts nuts, rubber insertion etc., (the tail piece if required shall be measured & paid for separatly). |
| 17 | 80 mm |
| 18 | Providing and fixing man hole cover with frame 500mm dia (medium duty) Total weight of frame and cover should not be less than 116 Kg. (Weight of frame 58Kg and weight of cover 58Kg.) complete in all respect. |
| 19 | Precast concrete block masonry in partitions walls 10 cm. thick with solid blocks of approved size i/c quion block closer etc. made of cement concrete 1:3:6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal & down gauged) in CM 1:3 (1 cement : 3 Sand) complete in all respect. |
| 20 | Prov. & placing in horizontal layers of filtering media duly graded, screened, washed & cleaned as specified by the Engineer-in-Charge:- |
| 21 | Top layer : Fine sand ( Eff.size 0.20 mm to 0.40 mm & uniformity coefficient 2.00 to 3.00) |
| 22 | 2nd layer : Coarse sand 3mm to 6 mm |
| 23 | Third layer : Bazri 6 mm to 20 mm |
| 24 | Fourth layer : Bazri 20 mm to 25 mm |
| 25 | Bottom layer: Broken stone 50 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender