Tender For Upgradation Of Patparganj Industrial Area (Under Dsiidc). S/H : Repair & Construction Of Damaged Boundary Wall Of Vacant Plot In Patparganj Industrial Area.
Tender Value
1.07 Crore
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
2.14 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Patparganj Industrial Area (Under Dsiidc). S/H : Repair & Construction Of Damaged Boundary Wall Of Vacant Plot In Patparganj Industrial Area.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :. a) All kinds of soil. i) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for: a) Columns, Pillars, Piers, Abutments, Posts and Struts |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | 12 mm cement plaster of mix : a) 1:6 (1 cement: 6 coarse sand) |
| 8 | 15 mm cement plaster on rough side of single or half brick wall of mix: a) 1:6 (1 cement: 6 coarse sand) |
| 9 | Finishing walls with water proofing cement paint of required shade : a) New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 10 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. a) New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming |
| 11 | Providing and Placing in position factory made machine Particulars batched and mackine mixed precast reinforced cement concrete crash barrier/ Jersey Barriers_ in required design and size of M-30 grade cement concrete including centering, shuttering, reinforcement of 10 mm dia TMT bars cost of of Fe 500D grade at maximum @ 150 mm centre to centre in ring and 10 mm dia TMT bars in distribution and providing 2 nos. rope hooks at both ends, making drainage opening wherever required, and cost of transportation, placing erection, handling at site for all leads and lifts etc. Al complete as per the direction of Engineer-in-Charge. Jersey Barriers of size 3045 mm x 840 mm x 610 mm |
| 12 | Providing and pasting 3M Diamond Grade/HIP (High Intensity Prismatic) Sheeting tape of approved brand and manufacturer all complate as per direction of engineer in charge. |
| 13 | Correction factor on existing items of the DSR-2023 i.e. 0.973 (Or Less 2.7%) |
| 14 | Add Cost Index @ 3% on DSR-2023 Items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender