Tender For Supply Installation Testing and Commissioning of Feeder Pillar For Lighting And Related Cable Work At Hotel Samrat New Delhi.
Tender Value
7.84 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
5 days left
EMD
15700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Feeder Pillar For Lighting And Related Cable Work At Hotel Samrat New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | SITC of outdoors type Double door Feeder Pillar powder coated size 1400mm x 1200mm x 300mm made of 1.6 mm thick CRCA sheet suitable for 415 Volt 3 Phase 50 Hz AC supply, i/c Aluminium Bus Bar and having arrangement for incoming & Outgoing cables, cable Alley, cable termination with detachable gland plates, earth studs locking arrangement interconnections and i/c of the following material as reqd.a) 250 Amp 25KA Four Pole MCCB with microprocessor release 01 No.b) Copper spreaders for 250Amp FP MCCB 1 Setc) Extended Rom Handle for 250Amp MCCB 1Nod) 125 Amp 25KA Four Pole MCCB with microprocessor release 01 Noe) Copper spreaders for 125Amp FP MCCB 1 Setf) Extended Rom Handle for 125Amp MCCB 1 Nog) ML-3 Contactor 1 Noh) 63Amp TPN MCB 2 Nos.i) 32Amp DP MCB 3 Nos.j) 32Amp SP MCB 9 Nos.k) Analog timer FM1 / Quartz 1 Nol) Indication Light LED Type Red 1 Nom) Indication Light LED Type Yellow 1 Non) Indication Light LED Type Blue 1 Noo) Identification Stickers / Marks for indication lights 3 Nos.p) Digital Voltmeter 96sqmm 1 Noq) Digital Ammeter 96sqmm 1 Nor) CT 250/5Amp 3 Nos.s) Auto Manual Switch, 10Amp, 1Pole 2Way 1 No.t) MCB Channel / DIN Bar 1 Nou) PVC Channel with cover 2 Nos.v) Neutal links 12way 3 Nos.w) Fabricating the MS angle Iron Stand size 1200mm X 300mm X450mm made from 40 X 40 X 6mm angle, cutting hole, painting, Nut Bolts etc. i/c cement, sand, rodi etc. for grouting feeder pillar in lawn complete as reqd. 1 No. |
| 2 | Supplying, Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Aluminium Armoured cable of 4C X 50sqmm size of 1.1 KV grade on wall surface as required. |
| 3 | Supplying of one number PVC insulated and PVC sheathed/ XLPE Copper Armoured cable of 3C X 2.5sqmm size of 1.1 KV grade as required. |
| 4 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3C X 2.5sqmm size as required. |
| 5 | On wall surface |
| 6 | In HDPE Pipe |
| 7 | In open duct |
| 8 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 9 | 40mm dia (OD-40mm & ID-32mm Nominal) |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 11 | 4C X 50sqmm (35mm) |
| 12 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 13 | Supplying and fixing of PVC cable junction box IP 66 , size 155mm X 210mm X 92mm with terminal i/c 2Nos. 6-32Amp SP MCB and electrical cable connections etc. complete as reqd. |
| 14 | Supplying, Laying and termination of 3C X 1.5sqmm copper round sheathed flexible cable for electrical poles as required. |
| 15 | Supply, Installation, Testing and Commissioning of 800Amp 50KA four pole MCCB with Thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes, making connections complete as required. |
| 16 | Buy back defective existing feeder pillar panel and cables. (without Aluminium bus bar) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender