Tender For Construction Of Community Sanitary Complex Pum School Boys Toilet In Vettangudi Panchayat At Kollidam Block Under Sbm (G) - Ii 2026 - 2027
Tender Value
7.78 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
16 days left
EMD
7800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayiladuthurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Sanitary Complex Pum School Boys Toilet In Vettangudi Panchayat At Kollidam Block Under Sbm (G) - Ii 2026 - 2027
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation in all classes of soils and depositing on bank with an initial lead and lift such as sand or other loose soil, wet sand not under water silt and ordinary soil, sandy loom, and hard stiff, black cotton soil, red earth, etc , complete |
| 2 | Sand filling in foundation and for sand soling in road for sub base course with good river sand including cost and conveyance and all labour charges etc., |
| 3 | C.C 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, Compacting and watering etc., complete. |
| 4 | Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges etc., complete. |
| 5 | Supply and fabrication of steel including cost and conveyance of steels to worksite including labour for cutting, jointing and welding if necessary including all labour charges for dying with binding wire etc., complete. |
| 6 | Supply and fabricating erecting and fixing of UV coated poly carbonite sheet 10mm thick tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying withstandard specification and as directed by the department officers |
| 7 | Supply and fabricating erecting and fixing of Stainless steel including priming coat fixing in position with all necessary accessories complete complying withstandard specification and as directed by the department officers |
| 8 | Supplying, fabricating, erecting structural steel works |
| 9 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). |
| 10 | Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete |
| 11 | Paving the floor with scratch proof ceramic tiles of approved colour and size in CM 1:3, 20mm thick and pointing with white cement using 0.4 Kg/Sqm mixed with colouring pigments to suit the colour of the tiles including finishing the joints neatly complying with standard specification etc., complete. |
| 12 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 13 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 14 | Plastering in CM 1:5 , 12mm thick including cost and conveyance of all materials and all labour charges etc., complete. |
| 15 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 16 | Painting two coats of new iron works using ready mixed enamel paint |
| 17 | Supply and Fixing of Steel Door of Size 1.2 x 2.10 m |
| 18 | 110mm dia pvc pipe |
| 19 | 110mm dia pvc Elbow |
| 20 | 110mm dia pvc Elbow |
| 21 | Pvc Tank 1000 lit |
| 22 | Supply and Fixing of indian water Closet |
| 23 | Supply and Fixing of Urinal Closet |
| 24 | Supply and Fixing of Steel Door of Size 0.75 x 2.10 m |
| 25 | Provision for Water supply internal tap |
| 26 | Provision for Name Board |
| 27 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender