Tender For Repair And Maintenance Of Various Summer And Winter Appliances At K Area And Sec 28/29 Under Ge Chandigarh.
Tender Value
28.80 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
6 days left
EMD
57600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
S.a.s Nagar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Various Summer And Winter Appliances At K Area And Sec 28/29 Under Ge Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down ceiling fans of 1200/1400mm sweep and any make after disconnecting from ceiling rose, opening up, including greasing and overhauling after replacing unserviceable spairs like bearings, bushes, capacitors, ms clamp,rubeer reels with nut, bolt split pin, and shaft, sleeves, rewinding, testing, rehanging and making connection to ceiling rose complete all as specified and as directed by Engineer-in-charge. Note: (i) Spares parts for replacement shall be measured and paid for seprately as supply only under respective items of BOQ. (ii) Technician of contractor shall visit door to door and attend complaints after take the complaints from E/M complaint cell in respective bldg in Md/OTM Accn and obtain their signatures of user after satisfactory complition of work (iii) rewinding of Fan will be done in 03 working days (iv) For every complaint not rectified within prescribed time limit, a penalty of Rs 500 per complaint shall be imposed (v) A workshop for ceiling fan winding shall be installed at K area complaint cell, The store space will be provided by the department. |
| 2 | Taking down exhaust fans/wall mounted fan of any sweep and any make after disconnecting, opening up, including greasing and overhauling after replacing unserviceable spairs like bearings, bushes, capacitors, ms clamp, nut, bolt and split pin, and shaft. sleeves, rewinding, testing, refixing and making connection to ceiling rose Complete all as specified and as directed by Engineer-in-charge. Note: (i) Spares parts for replacement shall be measured and paid for seprately as supply only under respective items of BOQ. (ii) Technician of contractor shall take the complaints from E/M complaint cell and rectified on the same day and obtain signatures of user after satisfactory complition of work (iii) rewinding of fan will be done in 03 working days (iv) For every complaint not rectified within prescribed time limit, a penalty of Rs 500 per complaint shall be imposed. |
| 3 | M&L rewinding to ceiling fan motor of 1200mm sweep winded with winding machine with super enameled copper winding wire of existing size including insulated sleeves& paper , varnishing with ‘B’ class insulation varnish thimbles, connection with flexible cable of copper conducor of size 23/.0076 upto connector block ( winding wire exc 300 gm and n-exc 350gm ) Complete all as specified and as directed by Engineer-in-charge. |
| 4 | M&L rewinding to ceiling fan motor of 1400mm sweep winded with winding machine with super enameled copper winding wire of existing size including insulated sleeves& paper , varnishing with ‘B’ class insulation varnish thimbles, connection with flexible cable of copper conductor cable of size 23/.0076 upto connector block ( winding wire exc 350 gm and n-exc 750gm ) Complete all as specified and as directed by Engineer-in-charge. Note for item No 3 & 4 :--(i) The cost of cutting & taking out to existing old winding wire shall be deemed to be included in the unit rate of this item. Nothing extra shall be entertained on this account. |
| 5 | S&F in Repairs Ball Bearing 6201/6202 (as approved) , complete all as specified and as directed. |
| 6 | S&F in Repairs Ball Bearing 6203/6204 (as approved) , complete all as specified and as directed. |
| 7 | S&F in replacement shaft assembly including spring, washer suitable for ceiling fan of any sweep and any make complete all as specified and as directed. |
| 8 | S&F in replacement capacitor clamp suitable for ceiling fan 1200 mm sweep of any size and make complete all as specified and as directed. |
| 9 | Supply only gun metal bush suitable for 1200/1400/1500 mm sweep ceiling fans |
| 10 | S&F in replacement of outer cover set, lower and upper suitable for ceiling fan 1200 mm sweep of any size and make including nuts and bolts complete all as specified and as directed. |
| 11 | S&F in replacement of stator with copper winding suitable for ceiling fan 1200 mm sweep including nuts, bolts and loop wire of any size and make complete all as specified and as directed. |
| 12 | S&F in replacement of rotor/rotor-ring suitable for ceiling fan 1200 mm sweep of any size and make complete all as specified and as directed. |
| 13 | Rewinding to exhaust / pedestal/ wall mounting fan motor of 225 to 380mm sweep winded with winding machine with super enameled copper winding wire of existing size including insulated sleeves , paper , varnishing with ‘B’ class insulation varnish, thimbles, connection with flexible cable of copper conductor of size 23/.0076 up-to connector block Complete all as specified and as directed by Engineer-in-charge. |
| 14 | All as per item No 13 above but 450 mm sweep Note for item No 13 & 14 :--(i) The cost of cutting & taking out to existing old winding wire shall be deemed to be included in the unit rate of this item. Nothing extra shall be entertained on this account(ii) Spare parts like as Ball bearings, Bush & shaft shall be measured & paid as Supply only separately under respective item No 10 to 12 of this schedule . Fixing charges of these spare parts shall be deemed to be included in the unit rate of this item without entertaining extra cost on this account. |
| 15 | Supply only ball bearing suitable for 225/300/350/450 mm sweep exhaust / pedestal/ wall mounting fan |
| 16 | Supply only gun metal bush suitable for 225/300/350/450 mm sweep exhaust / pedestal/ wall mounting fan |
| 17 | Supply only mild steel shaft suitable for 225/300/350/450 mm sweep exhaust / pedestal/ wall mounting fan |
| 18 | Taking down defective BLDC Ceiling fan of 1200mm Sweep, any make, 230 volts of any make & size from any height of the building for finding out the defects and replaced the defective parts like as BLDC Circuit plate, diode, AC convertor including servicing / overhauling the same, including replacing minor accessories like locking pins, rubber real, PVC sleeve, greasing, clamps, etc including remote for remote controlled fan as required, and fixing back the same in its original position along with necessary fixing materials such as nut, bolts and washers etc all as specified and as directed by Engineer in charge. |
| 19 | Taking down defective BLDC Ceiling fan of 1400mm Sweep, any make, 230 volts of any make & size from any height of the building for finding out the defects and replaced the defective parts like as BLDC Circuit plate, diode, AC convertor including servicing / overhauling the same, including replacing minor accessories like locking pins, rubber real, PVC sleeve, greasing, clamps, etc including remote for remote controlled fan as required, and fixing back the same in its original position along with necessary fixing materials such as nut, bolts and washers etc all as specified and as directed by Engineer in charge. |
| 20 | S&F in replacement exhaust fan motor 225-300mm sweep, Copper wound, 50Hzs,230 Volt complete all as specified and as directed. |
| 21 | S&F in replacement exhaust fan motor 350-450mm sweep, Copper wound, 50Hzs,230 Volt complete all as specified and as directed. |
| 22 | M&L replacement to unserviceable capacitor 4/4.5 mfd in lieu of provided with new capacitor dry type 4/4.5 mfd suitable for 240 volt AC Complete all as specified and as directed by Engineer-in-charge. |
| 23 | M&L replacement to unserviceable capacitor 2.5 mfd in lieu of provided with new capacitor oil type 2.5 mfd suitable for 240 volt AC Complete all as specified and as directed by Engineer-in-charge. |
| 24 | M&L replacement to unserviceable capacitor 3.15 mfd in lieu of provided with new capacitor oil type 3.15 mfd suitable for 240 volt AC Complete all as specified and as directed by Engineer-in-charge. |
| 25 | Preparation surfaces, cleaning thoroughly with kerosene oil ceiling fans 1200mm/1400mm sweep to remove only dust and any type of spots and painted with synthetic enamel paint (white colour) with help of spray gun machine, including writing MES No, complete all as specified and as directed by Engineer-in-charge. |
| 26 | M&L for replacement to unserviceable fan blades (set of three blades) suitable for 1200/1400mm sweep ceiling fans complete all as specified and as directed by Engineer-in-charge. |
| 27 | S&F in repair fan blades (set of one blade) for 300 to 450mm Exhaust fan complete all as specified and as directed by Engineer-in-charge. |
| 28 | S&F in repair M.S rod (upto 3 feet)including clamp, nut & split pin suitable for 1200/1400mm sweep fan complete all as specified and as directed by Engineer-in-charge. |
| 29 | M&L for replacement to unserviceable rubber reels with new suitable for any sweep ceiling fan complete all as specified and as directed by Engineer-in-charge. |
| 30 | M&L for replacement to unserviceable PVC canopy suitable for any sweep ceiling fan complete all as specified and as directed by Engineer-in-charge. |
| 31 | S&F Front Grill Double Partition type of 20 SWG, best quality (as approved) of suitable size for Desert Cooler providing making Electric Connection to all Accessories as required including taking out/ down unserviceable one, complete all as specified and as directed. |
| 32 | S&F Motor Kit suitable for Desert Cooler, Copper wounded complete and One Set of Lugs for mounting body including taking out/ down unserviceable one, complete all as specified and as directed. |
| 33 | S&F Plastic PVC Distributor suitable for Desert Cooler heavy duty 15mm with Elbow, Tee, etc. fixed with Bolts, Nut & Washers including taking out/down unserviceable one, complete all as specified and as directed. |
| 34 | S&F Plastic PVC Pipe set for water distribution of 15mm bore suitable for Desert Cooler, heavy duty, ISI mark including taking out/down unserviceable one, complete all as specified and as directed. |
| 35 | S&F Running Capacitor suitable for Fan Motor of Desert Cooler including taking out/ down unserviceable one, complete all as specified and as directed. |
| 36 | S&F Selector Switch suitable for Desert Cooler of any Make and size including taking out/ down unserviceable one, complete all as specified and as directed. |
| 37 | S&F Submersible Water Pump suitable for Desert Cooler including taking out/ down unserviceable one, complete all as specified and as directed. |
| 38 | S&F Plug Top, 3 Pin, 5/6 Amp including taking out/ down unserviceable one, complete all as specified and as directed. |
| 39 | S&F PVC Round Flexible 3 Core Copper Connection Lead of size 1.50 Sqmm, 3 meter long including taking out/ down unserviceable one, complete all as specified and as directed. |
| 40 | S&F Mild Steel Desert Cooler Body of 20 SWG Powder Coated with 03 Nos Side Shutters of 22 SWG, Noise Pollution Control complete Body suitable for Air Flow capacity of 4000 Cmh of large body including taking out/ down unserviceable one, complete all as specified and as directed. |
| 41 | Taking out Fan Motor from Desert Cooler any size and Make, 230 Volts, 50 Cycles, removing burnt Winding Wire, rewinding the Motor with super enamelled Copper Winding Wire of suitable size and providing insulation along with insertion of superior type of Insulating Materials, binding, Varnishing and drying well after Varnishing, replacement of Shaft, Gun Metal Bushes and Rubber Bushes for Blower Motor, testing on load after fixing, complete all as specified and as directed. |
| 42 | S&F Wood Wool Pad (as approved) suitable for Desert Cooler, heavy duty and best quality including taking out/ down unserviceable one, complete all as specified and as directed. |
| 43 | Preparing old surfaces of Desert Cooler Body by descaling, rubbing, brushing, cleaning and applying two coats of Synthetic Enamel Paint (as approved) with Spray Gun Machine and Tank with Black Bituminous Paint from Inside Tank, complete all as specified and as directed. |
| 44 | M&L Mild Steel stand for supporting fan motor of desert cooler including taking out/ down unserviceable one, complete all as specified and as directed. |
| 45 | Disconnection and removing the unserviceable Split AC Outdoor & Indoor Unit/ window type of Capacity 1.5 to 2 Ton capacity from the existing position carefully for finding of the defects and to replace the unserviceable spare parts such as Compressor, Condensor Fan Motor, Condensor Coil, Suction & Discharge valves, mother plates including carry out leak detection test, Gas charging, servicing such as cleaning and removing the dust particles accumulated in the unit and filters carefully and washing the cooling unit and Indoor unit with water and refixing the same in its original position complete including connecting up of the Copper Tubes and cable connections, testing and commissioning complete all as specified and as directed by Engineer in charge. Make of existing ACs. Make:- LG/Blue Star/Hitachi/Voltas . (i) Cost of spares such as Compressor, Condensor Fan Motor, Condensor Coil, Suction & Discharge valves, mother plates, leak detection test, Gas charging shall be measured and paid separately under the respective Schedule 'A' Item. (ii) Makes & Specifications of the spare parts for replacement should be identical equivalent to the spares suitable for existing ACs. (i) Technician of contractor shall take the complaints from E/M complaint cell and rectified on the same day and obtain signatures of user after satisfactory complition of work (ii) Replacement of compressor, condenser unit, PCB work will be done in 03 working days (iii) For every complaint not rectified within prescribed time limit, a penalty of Rs 500 per complaint shall be imposed . |
| 46 | Supply only hermatically sealed Compressor Unit of Capacity 1.5 Ton Single Phase for Split Type/window type ACs complete all as specified and directed by Engineer in charge. |
| 47 | Supply only hermatically sealed Compressor Unit of Capacity 2.0 Ton Single Phase for Split Type/window type ACs complete all as specified and directed by Engineer in charge. Note for item No 46 to 47:--- (i) Contractor shall be produced original purchase voucher of original manufacturer /authorized dealer and test certificate shall be of original manufacturer to the department along with payment of RAR/Final bill. (ii) Recharging of refrigerant gas shall be measured & paid separately under respective item of BOQ. |
| 48 | Supply only Condensor Fan Motor 230 Volt suitable for 1.5 Ton Outdoor Split Type Air Conditioning Unit complete all as specified and as directed. |
| 49 | Supply only Fan Motor 230 Volt suitable for window type AC of 1.5 Ton capacity complete all as specified and as directed. |
| 50 | Supply only Fan Motor 230 Volt suitable for window type AC of 2.0 Ton capacity complete all as specified and as directed. |
| 51 | Supply only capacitor suitable for window type AC of 1.5/2 Ton capacity complete all as specified and as directed. |
| 52 | Supply only Condensor Coil Unit consisting of Copper tubing suitable for 1.5 Ton Outdoor Unit of Split Type Air Conditioning complete all as directed. |
| 53 | Supply only Condensor Coil Unit consisting of Copper tubing suitable for 2.0 Ton Outdoor Unit of Split Type Air Conditioning complete all as directed. |
| 54 | Supply only Condensor Coil Unit consisting of Copper tubing suitable for 1.5 Ton window Type Air Conditioning complete all as directed. |
| 55 | Supply only Evaporator Coil Unit consisting of Copper tubing suitable for 1.5 Ton Split Type Air Conditioning complete all as directed. |
| 56 | Supply only Eavaporator Coil Unit made out of Copper tubing suitable for 2 Ton Split Type Air Conditioning complete all as directed. |
| 57 | Supply only Evaporator Coil Unit consisting of Copper tubing suitable for 1.5 Ton window Type Air Conditioning complete all as directed. |
| 58 | Supply only PCB/Mother Board Unit alongwith Remote Control Unit suitable for 1.5/2 Ton Indoor Unit of Split/window Type Air Conditioning complete all as directed. |
| 59 | Disconnection and Removing the unserviceable /broken Fan Blade from the Outdoor units of Split AC Unit 1.5 / 2 Ton Capacity and S&F New Fan Blade Unit complete suitable for existing AC Unit. |
| 60 | Disconnection and removing the unserviceable Display Unit and S&F Digital Display for indicating Temperature, Temperature Sensor for 1.5/2 Ton Split AC Unit complete all as directed. Make :- LG/Hitachi/Voltas |
| 61 | Recharging of suitable Gas for air conditioner unit window type/ split type 1.5 Ton complete including testing of leakage and testing the unit for satisfactory performance Complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Recharging of suitable Gas for air conditioner unit window type/ split type 2.0 Ton complete including testing of leakage and testing the unit for satisfactory performance Complete all as specified and as directed by Engineer-in-Charge. |
| 63 | S&F replacement of unserviceable starting capacitor 36 mfd with new suitable for split type AC 1.5/2 Ton capacity, complete all as specified and as directed by Engineer-in-Charge. |
| 64 | S&F replacement of unserviceable starting capacitor 100-120 mfd with new suitable for split type AC 1.5/2 Ton capacity, complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F replacement of unserviceable blower unit with new blower unit suitable for window type AC of 1.5/2 Ton capacity as per exising capacity complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F replacement of unserviceable blower motor with new blower motor suitable for split type AC of 1.5 Ton capacity as per exising capacity motor complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F replacement of unserviceable blower motor with new blower motor suitable for split type AC of 2 Ton capacity as per exising capacity motor complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Disconnection and Removing the damaged Flexible PVC Drain Pipe of dia 25mm and S&F New Standard Flexible PVC Drain Pipe of dia 25mm for capacity 1.5 ton, 2.0 ton Capacity complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Disconnection and removing the Old unserviceable Copper Pipe between Indoor & Outdoor Unit and S&F New suction Copper Pipe of any size to the existing position incl leak testing complete all as directed by Engineer in charge. |
| 70 | Disconnection and removing the Old unserviceable Copper Pipe between Indoor & Outdoor Unit and S&F New discharge Copper Pipe of any size to the existing position incl leak testing complete all as directed by Engineer in charge. |
| 71 | S&F Suction/discharge Valve made of Brass suitable for 1.5 Ton Outdoor Unit of Split Type Air Conditioning complete all as directed. |
| 72 | S&F Suction/discharge Valve made of Brass suitable for 2 Ton Outdoor Unit of Split Type Air Conditioning complete all as directed. |
| 73 | Material and labour for Internal wiring for split unit of any capacity with single core copper conductor FRLS cable as per existing size only complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Disconnection and Removing the Cable connection and Copper pipe alongwith all connection items carefully from the existing indoor and out door units and Pump down the refrigerant from out door unit of tonnage 1.5/2 ton including stablizer from the existing position and shifting the AC unit at new place and refixing the out door and indoor units with necessary copper tubing including topping up of gas and connecting stablizer etc for its proper functioning all as direcred and specified by Engineer-in-charge. |
| 75 | Disconnection and Removing the defective/damaged Industrial Plug & Socket Board and supply & fix Industrial Plug & Socket controlled 15/16Amp Single Pole ISI Marked in and including sheet metal enclosure suitable for 1.5/2 Ton capacity complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Disconnection and removing the unserviceable / burnt out Copper Cable between Indoor & Outdoor Unit and S&F PVC Insulated, PVC Sheathed, Multistranded Copper Cable 3Core 4 Sqmm, ISI Marked, 1100 volts Grade and connecting to the unit along with necessary fixing materials complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F air filter suitable for window type/Split type AC 1.5/2 ton capacity including taking down old unserviceable air filter complete all as specified and directed by Engr-in-Charge. |
| 78 | Supply and fixing and testing in repairs split type air condioner indoor unit having hot & cold single phase 220 volt complete of capacity 1.5 ton Installation includes copper tubing as required up to 10 mtr and providing seasoning tape etc. and making good disturbed surfaces complete as directed by Engineer in Charge Make:Voltas/LLYOD/LG |
| 79 | Supply and fixing and testing in repairs split type air conditioner outdoor unit having hot & cold single phase 220 volt complete of capacity 1.5 ton Installation includes copper tubing as required up to 10 mtr and providing seasoning tape etc. and making good disturbed surfaces complete as directed by Engineer in Charge Make:Voltas/LLYOD/LG |
| 80 | Disconnection and removing the old unserviceable Outdoor Stand and S&F New Outdoor Stand made of Iron bracket to accomodate the air conditioner along with fixing materials complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Taking down carefully dismantling voltage stabilizer of capacity 3 KVA to 5 KVA, single phase 240 volt AC of any make and any size opening up for inspection necessary repair and replacement of worn out/defective spare parts, rewinding of main transformer with supper enameted copper wire of existing gauge and weight reassembling, connecting up, testing etc complete all as directed by Engineer-in-Charge. |
| 82 | M&L for servicing of water cooler of any size and make by opening/dismantling water cooler and apply coil cleaning chemical and washing with plain water untill coil is clean, check all electrical connection, check lekage and repair leakage with brazing complete all as specified and as directed. |
| 83 | Disconnecting, opening and taking out unserviceable sealed compressor of water cooler of capacity 120/150/180 litres and replaced with new sealed compressor of existing capacity & model including soldering of liquid /gas pipe ,cleaning the system arresting the leakage etc complete all as specified and as directed by Engineer-in-charge. Note : (i) Technician of contractor shall take the complaints from E/M complaint cell and rectified on the same day and obtain signatures of user after satisfactory complition of work (ii) replacement of compressor will be done in 03 working days (iii) For every complaint not rectified within prescribed time limit, a penalty of Rs 500 per complaint shall be imposed . |
| 84 | All as per item No 83 above but water cooler of capacity 40/80 litres. Note for item No 83 & 84:(i) Contractor shall be produced original purchase voucher of original manufacturer /authorized dealer and test certificate shall be of original manufacturer to the department along with payment of RAR/Final bill. (ii) Recharging of refrigerant gas shall be measured &paid separately under respective item of BOQ. |
| 85 | Cleaning the system with CTC and charging the refrigerant suitable gas including replacing strainer and rectification of leakage of the system from water cooler of150 litres capacity complete all as specified and as directed by Engineer-in-charge. |
| 86 | All as per item No 85 above but water cooler of capacity 40/80 litres |
| 87 | S&F for internal wiring for water coolers 150/80/40 ltr capacity with PVC insulated unsheathed flexible copper conductor cable single core size 40/0.0076 fixed with terminal clips etc including replacement of screws, washers etc required for fastening to body etc complete all as specified and as directed by Engineer-in-charge. |
| 88 | S&F replacement of unserviceable starting relay assembly with new starting relay assembly suitable for water cooler of 150 litre capacity as per exisitng make Complete all as specified and as directed by Engineer-in-Charge. |
| 89 | All as per item No 88 above but water cooler of capacity 40/80 litre |
| 90 | Replacement to unserviceable Capacitor running/starting with new capacitor of existing make and model suitable for water cooler of capacity 150/180 liters, complate all as specified and as directed. |
| 91 | All as per item No 90 above but water cooler of capacity 40/80Liters. |
| 92 | S&F replacement of unserviceable fan motor with new fan motor suitable for water cooler of 150 litre capacity as per exisitng make Complete all as specified and as directed by Engineer-in-Charge. |
| 93 | All as per item No 92 above but water cooler of capacity 40/80 liter |
| 94 | M&L 15 mm bore self closing tap push type cast copper alloy chromium plated fixed to water cooler as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 95 | S&F Ball valve of PVC high pressure with polythene float & flynut of 15 mm dia and capacity suitable for 40 to 150 Ltrs Water Cooler as per sample including disconnection and removing the unserviceable Ball valve of PVC high pressure with polythene float & flynut and complete all as specified and as directed by Engineer-in-Charge. |
| 96 | M&L for replacement of unserviceable condensor coil for water cooler of capacity 120/150/180 ltrs by taking down old unserviceable coil and replacing with new one and making it leak proof with brazing and top up gas and testing on completion complete all as specified and as directed. |
| 97 | All as per item no 96 above but of capacity 40/80 ltrs |
| 98 | S&F in repair capilary of any size and make suitable for water cooler/refrigerator /deep freezer/ac complete all as specified and as directed. |
| 99 | S&F replacement of unserviceable thermo-stat switch with new thermo-state switch suitable for water cooler any capacity as per exisitng make Complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Disconnecting & opening of deep freezers and taking out unserviceable sealed compressor of capacity 210 to 315 liters and replacing with new sealed compressor of existing capacity & model including soldering of liquid /gas pipe ,cleaning the system arresting the leaking etc complete all as specified and as directed by Engineer-in-charge. Note for item No 100 : (i) Contractor shall be produced original purchase voucher of original manufacturer /authorized dealer and test certificate shall be of original manufacturer to the department along with payment of RAR/Final bill. ( ii) Recharging with refrigerant gas shall be measured & paid separately under respective item of BOQ. (iii) Technician of contractor shall take the complaints from E/M complaint cell and replacement of compressor will be done in 03 working days and obtain signatures of user after satisfactory complition of work (iv) For every complaint not rectified within prescribed time limit, a penalty of Rs 500 per complaint shall be imposed. |
| 101 | Disconnection and removing the unserviceable burnt Fan motor unit from the deep freezer and S&F New Fan Motor unit , Single phase, 230 volts 50 Hz of same size and capacity suitable for 165/210 / 315 ltrs deep freezer as per sample complete all as specified and as directed. |
| 102 | Cleaning the system with CTC and charging the refrigerant suitable gas including replacing strainer and rectification of leakage of the system from deep freezer upto 315 litres capacity complete all as specified and as directed by Engineer-in-charge. |
| 103 | M&L for internal wiring for deep freezer upto 315 ltr capacity with PVC insulated unsheathed flexible copper conductor cable single core size 1.5/2.5 Sqmm fixed with terminal clips etc including replacement of screws, washers required for fastening to body etc complete all as specified and as directed by Engineer-in-charge. |
| 104 | S&F replacement of unserviceable starting relay OLP assembly with new starting relay assembly suitable for deep freezer water cooler of 210 to 315 litre capacity as per existing make Complete all as specified and as directed by Engineer-in-Charge. |
| 105 | Disconnecting & opening refrigerator of capacity 180/210/320 litre and taking out unserviceable sealed compressor and replacing with new sealed compressor of existing capacity & model including soldering of liquid /gas pipe ,cleaning the system & the leakage etc complete all as specified and as directed by Engineer-in-charge. |
| 106 | Recharging of suitable gas in refrigerant cap 180/210/320 litre complete including testing of leakage and testing the unit for satisfactory performance complete all as specified and as directed by Engineer-in-Charge. |
| 107 | S&F in repairs Door gaskest, liner of any size and make complete all as specified and as directed |
| 108 | Replacement of Pigmy lamp (bulb) |
| 109 | Opening to refrigerator frezzer of capacity 180 to 320 ltr Refixing the same after flushing out and removal of blockge brazing replacement of liquid line, filter and recharging to refrigerator with suitable gas to obtain the desired cooling complete all as specified and as directed by engineer-in-charge |
| 110 | Opening to refrigerator PCB Circuit plate of capacity 180 to 320ltr and S&F PCB Circuit plate fixing the same size (as per site require) Complete all as specified and as directed by engineer-in-charge |
| 111 | S&F in repair thermostat with knob for refrigerator of any size and make complete all as specified and as directed. |
| 112 | Replacement of over load protector/relay for any capacity. |
| 113 | S&F Fan Motor of same size and capacity suitable for 180/210/320 litres refrigerator complete all as specified and as directed by Engineer-in-Charge. |
| 114 | Disconnecting & taking down unserviceable geyser of 25/50 litre capacity of any make from the wall and opening carefully including descaling the inner surface by scrapping, carrying out soldering/ brazing/gas welding to prevent the leakage, filling of glass wool & replacement of any other defective spares , including replacement of required number of stainless steel screws, nuts & bolts,assembling the the same after repair work and fixing in its orginal place, connecting to water mains and electric supply, testing after repairs, complete all as specified and as directed by Engineer-in-charge. Note :spare parts and glass wool shall be measured and paid separtaly under respective items of BOQ. (i) Technician of contractor shall take the complaints from E/M complaint cell and rectified on the same day and obtain signatures of user after satisfactory complition of work (ii) replacement of inner tank and assembly work will be done in 03 working days (iii) For every complaint not rectified within prescribed time limit, a penalty of Rs 500 per complaint shall be imposed . |
| 115 | S&F replacement of unserviceable Stain less steel inner tank of 25 liter capacity geysers of existing make & model including testing after assembling & fixed at site complete all as specified and as directed by Engineer-in-Charge. |
| 116 | All as per item No 114 above but 50 litre capacity of geyser. |
| 117 | Disconnecting and removing the unserviceable and Supply and fix in repairs outer body suitable for 25 liter capacity geysers of any make & model including testing after assembled & fixed at site complete all as specified and as directed by Engineer-in-Charge. |
| 118 | All as per item No 116 above but 50 litre capacity of geyser. |
| 119 | Replacement of unserviceable heating element with new heating elements screw/or stud type ISI marked 2000 watt 230 volts AC single phase including necessary washer, screw, nuts bolts etc complete and all as specified. |
| 120 | Replacement of unserviceable Geyser thermostat switch any type/size with new thermostat switch ISI marked of range 0-100 degree centigrade, adjustable between upto 100 degree centigrade with necessary washer, screws nut etc complete and all as specified. |
| 121 | Supply only glass wool of good quality as approved for 25 litre capacity of geyser complete all as specified and as directed by Engineer-in-Charge. |
| 122 | All as per item No 121 above but 50 litre capacity of geyser. |
| 123 | Supply and fix in repairs 06/08 hole Assembly with apparatus plate, gasket, nuts and bolts for water heateer 25 ltrs ISI Marked complate all as specified and as directed. |
| 124 | All as per item No 123 above but 50 litre capacity of geyser. |
| 125 | Replacement of unserviceable Safety valve complate all as specified and as directed. |
| 126 | Replacement of unserviceable indicator lamp assy with new indicator lamp assy 230 volts square or round suitable for any type or make of Geyser including connecting complete and all as specified. |
| 127 | Replacement of unserviceable Gun metal non return valve ,15 mm bore complate all as specified and as directed. |
| 128 | S&F PVC connection 450mm long for cold / hot water heavy duty 15mm bore coupling or nuts complate all as specified and as directed. |
| 129 | S&F in repairs Plug top 3-pin, 16 Amp complete all as specified and as directed by Engineer-in-Charge. |
| 130 | S&F sheet metal enclosure with single pole and neutral with two pin and earth plug socket including 20Amp 240 Volt including MCB SP,20Amp(C-series) as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 131 | Replacement of Rubber O ring /gaskit for 25 ltrs complate all as specified and as directed. |
| 132 | M&L for preparation of surface of geyser of 25 ltrs capacity of any make by scrapping to existing paint, filling cavities with filler (Putty) after cleaning of dust etc and applying synthetic enamel paint over a coat of red oxide primer with spray gun and writing the MES No with black paint complete all as specified and as directed by Engineer-in-Charge. |
| 133 | M&L for preparation of surface of geyser of 50 ltrs capacity of any make by scrapping to existing paint, filling cavities with filler (Putty) after cleaning of dust etc and applying synthetic enamel paint over a coat of red oxide primer with spray gun and writing the MES No with black paint complete all as specified and as directed by Engineer-in-Charge. |
| 134 | S&F replacement of unserviceable cable with flexible PVC insulated copper conductor cable 3 core of size 40/0.0076 for AC of any capacity complete all as specified and as directed by Engineer-in-Charge . |
| 135 | Supply and fix voltage stablizer for automatic operation,single phase naturally air cooled indoor type & desined for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ±2.5% and capacity 5 KVA complete all as specified and as directed by Engineer-in-Charge . |
| 136 | All as per item No 135 above but 3 KVA. |
| 137 | S&F insulation of copper pipe of split AC of any size by taking down old unserviceable insulation complete all as specified and as directed. |
| 138 | S&F in temperature sensor of split/window AC by taking down old sensor and calibration after fixing complete all as specified and as directed. |
| 139 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and as directed by Engineer-in-Charge . Note for item No 01 to 139: The contractor shall attend all the complaints, irrespective of whether the complaints are single or bulk. Non-attendamce or delay shall not be permitted. failure to attend complaints on same day shall attract an incremental penalty starting from Rs 500 for the first day, which increase by Rs 500 per day for each subsequent day. |
| 140 | Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch 'A' section II (i.e Rs 1,32,117.00 shall be deducted from the total amount arrived. |
| 141 | Total of Schedule 'A' Rs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender