Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #56689992

Tender For Repair/Maintenance And Cleaning Of Sewerage System In Domestic Area (Zone-Ii) At Af Stn Bhisiana

Issued by Statutory Bodies & Commissions/Committees · Bathinda, Punjab
Tender Value
35 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maintenance And Cleaning Of Sewerage System In Domestic Area (Zone-Ii) At Af Stn Bhisiana

BOQ

Name of Work:- REPAIR/MAINTENANCE AND CLEANING OF SEWERAGE SYSTEM IN DOMESTIC AREA (ZONE-II) AT AF STN BHISIANA
Sl. No. Item Description
1Material and labour for cleaning and removal of blockages (in foul condition only) from inside building (at any floor) as bathroom/WC/Kitchen to GT, Floor trap to GT, along with vertical pipes, oval access door, washing and cleaning thoroughly up to the cleaning eye of the down-take pipe, by using mechanical equipment, rodding devices, choke removers, pressure jetting techniques or any other approved method. The item shall include locating and clearing the blockage, flushing the entire line with water to ensure free flow, cleaning and removal of silt, sludge and other obstructions, and reinstatement of oval access door covers, GT covers and manhole covers in their original positions after completion of the work. The work shall be carried out to the entire satisfaction of the Engineer-in-Charge and shall be complete in all respects as specified and directed.Note: (i) The unit of measurement shall be Each Job per building (bathroom/WC/Kitchen to GT, Floor trap to GT, along with vertical pipes all one job). The rate quoted shall be deemed to include complete cleaning from inside of building, cleaning eye of the down-take pipe or any other incidental work required for satisfactory completion of the job.
2Material and labour for cleaning and removal of blockages in sewage lines of any diameter, length and depth from gully trap (GT)/grating to the first manhole, including cleaning of the gully trap and first manhole up to the cleaning eye of the down-take pipe, by using mechanical equipment, rodding devices, choke removers, pressure jetting techniques or any other approved method. The item shall include locating and clearing the blockage, flushing the entire line with water to ensure free flow, cleaning and removal of silt, sludge and other obstructions, and reinstatement of oval access door covers, GT covers and manhole covers in their original positions after completion of the work. The work shall be carried out to the entire satisfaction of the Engineer-in-Charge and shall be complete in all respects as specified and directed.Note: (i) The unit of measurement shall be Each Job. The rate quoted shall be deemed to include complete cleaning of the gully trap (GT)/grating, first manhole, cleaning eye of the down-take pipe and the connected sewer line between them, including removal of all blockages, flushing and restoration of free flow. No separate measurement or additional payment shall be admissible for cleaning of the GT/grating, first manhole, cleaning eye, connected sewer line, flushing operations or any other incidental work required for satisfactory completion of the job.
3Material and labour for opening the existing manhole cover and removing/extracting liquid, sludge, silt, solid waste and other obstructions from manhole chambers (in foul condition or as directed) of any shape and size, having depth not exceeding 1.50 m, including cleaning and removal of blockages from the connected sewer line of any diameter up to 300 mm from the preceding manhole up to the subject manhole, irrespective of length, by using a mechanically operated truck/tractor-mounted hydro-jet sewer cleaning machine equipped with sewage/sludge collection tank, wash-down system, suction derrick arm, hydraulically operated spring-loaded rotary sliding vane compressor, V-hose, end-section nozzle, strainer and all other necessary accessories. The item shall include jetting, suction, cleaning and flushing of the manhole chamber and connected sewer line, temporary stopping/diversion of sewage flow by means of sand bags, gunny bags or other approved methods wherever required during cleaning operations, removal of such temporary obstructions after completion of cleaning to restore normal sewage flow, collection, transportation and disposal of extracted sludge/waste in closed containers outside MD land premises, and reinstatement of the manhole cover in its original position after completion of the work, complete in all respects as specified and directed by the Engineer-in-Charge.
4Material and labour for opening the existing manhole cover and removing/extracting liquid, sludge, silt, solid waste and other obstructions from manhole chambers (in foul condition or as directed) of any shape and size, having depth exceeding 1.50 m but not exceeding 3 m, including cleaning and removal of blockages from the connected sewer line of any diameter up to 300 mm from the preceding manhole up to the subject manhole, irrespective of length, by using a mechanically operated truck/tractor-mounted hydro-jet sewer cleaning machine equipped with sewage/sludge collection tank, wash-down system, suction derrick arm, hydraulically operated spring-loaded rotary sliding vane compressor, V-hose, end-section nozzle, strainer and all other necessary accessories. The item shall include jetting, suction, cleaning and flushing of the manhole chamber and connected sewer line, temporary stopping/diversion of sewage flow by means of sand bags, gunny bags or other approved methods wherever required during cleaning operations, removal of such temporary obstructions after completion of cleaning to restore normal sewage flow, collection, transportation and disposal of extracted sludge/waste in closed containers outside MD land premises, and reinstatement of the manhole cover in its original position after completion of the work, complete in all respects as specified and directed by the Engineer-in-Charge.
5Material and labour for opening the existing manhole cover and removing/extracting liquid, sludge, silt, solid waste and other obstructions from manhole chambers (in foul condition or as directed) of any shape and size, having depth exceeding 3 m but not exceeding 4.5 m, including cleaning and removal of blockages from the connected sewer line of any diameter up to 300 mm from the preceding manhole up to the subject manhole, irrespective of length, by using a mechanically operated truck/tractor-mounted hydro-jet sewer cleaning machine equipped with sewage/sludge collection tank, wash-down system, suction derrick arm, hydraulically operated spring-loaded rotary sliding vane compressor, V-hose, end-section nozzle, strainer and all other necessary accessories. The item shall include jetting, suction, cleaning and flushing of the manhole chamber and connected sewer line, temporary stopping/diversion of sewage flow by means of sand bags, gunny bags or other approved methods wherever required during cleaning operations, removal of such temporary obstructions after completion of cleaning to restore normal sewage flow, collection, transportation and disposal of extracted sludge/waste in closed containers outside MD land premises, and reinstatement of the manhole cover in its original position after completion of the work, complete in all respects as specified and directed by the Engineer-in-Charge.
6Note for above srl item 1 to 5 of BOQ : (i) The unit of measurement shall be Each Job. The rate quoted shall be deemed to include cleaning of the manhole chamber as well as the connected sewer line from the preceding manhole to the subject manhole. No separate measurement or additional payment shall be admissible for cleaning, jetting, flushing or de-silting of the connected sewer line.
7Material and labour for opening existing access covers and removing/extracting all liquid, dewatering, sludge, silt, solid waste, scum, sewage deposits and other obstructions from septic tanks or sewage wells or manhole above 4.5m depth of any type (rectangular, circular or otherwise), of any size, depth and capacity, whether in foul condition or otherwise including cleaning and removal of blockages from the connected sewer line of any diameter from the preceding manhole up to the subject septic tanks / sewage wells / manhole, irrespective of length, by using a mechanically operated truck/tractor-mounted sewage suction machine/ pump, hydro-jet sewer cleaning machine, sludge tanker fitted with sewage/sludge collection tank, and all other necessary accessories and equipment. The item shall include complete dewatering, suction, cleaning and desludging, breaking and loosening of compacted sludge wherever required, collection of all extracted liquid, sludge and waste material, transportation in leak-proof closed containers/tankers and disposal thereof outside MD land premises, and reinstatement of the access cover in its original position after completion of the work, including cleaning off shrubs/bushes, vegetarian found 2 m all-around from external edge of septic tank or sewage well, complete in all respects as specified and directed by the Engineer-in-Charge.Note : (i) The unit of measurement shall be per thousand Litre (1000 Ltr) of sewage/sludge/waste actually removed and transported, measured on the basis of the certified volumetric capacity of the closed collection tank/container/tanker utilized for the work. Please Enable Macros to View BoQ information
8Material and labour for opening existing access covers and removing/extracting all liquid, dewatering, sludge, silt, solid waste, scum, sewage deposits and other obstructions from septic tanks or sewage wells or manhole above 4.5m depth of any type (rectangular, circular or otherwise), of any size, depth and capacity, whether in foul condition or otherwise including cleaning and removal of blockages from the connected sewer line of any diameter from the preceding manhole up to the subject septic tanks / sewage wells / manhole, irrespective of length, by using a mechanically operated truck/tractor-mounted sewage suction machine/ pump, hydro-jet sewer cleaning machine, sludge tanker fitted with sewage/sludge collection tank, and all other necessary accessories and equipment. The item shall include complete dewatering, suction, cleaning and desludging, breaking and loosening of compacted sludge wherever required, collection of all extracted liquid, sludge and waste material, transportation in leak-proof closed containers/tankers and disposal thereof outside MD land premises, and reinstatement of the access cover in its original position after completion of the work, including cleaning off shrubs/bushes, vegetarian found 2 m all-around from external edge of septic tank or sewage well, complete in all respects as specified and directed by the Engineer-in-Charge.Note : (i) The unit of measurement shall be per thousand Litre (1000 Ltr) of sewage/sludge/waste actually removed and transported, measured on the basis of the certified volumetric capacity of the closed collection tank/container/tanker utilized for the work. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56689992
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 18-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maintenance And Cleaning Of Sewerage System In Domestic Area (Zone-Ii) At Af Stn Bhisiana
Basic Detail
Tender No GE BHI/TOKEN-27 OF 2026-27
Bidding Type Tender
Location
City Bathinda
State Punjab
Key Dates
Publish Date 28 Jul 2026
Submission Date 18 Aug 2026
Open Date 20 Aug 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
b8df73ca-04b6-4636-a81b-f8c3db3247fe.html
BOQ_875110.xls
TenderDocToken27.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 28, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Aug 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

b8df73ca-04b6-4636-a81b-f8c3db3247fe.html

xls

BOQ_875110.xls

pdf

TenderDocToken27.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders