Tender For Periodical Services, Repair And Desilting, Cleaning Manhole, Sewage Line, Cleaning/Repl. Pvc Tanks, Repair/Maint Of Internal Wiring, Fan, Geyser, Dg Sets, Securitylights For Hq 14 Sect, 63Rr,54Rr,33Rr,58Rr And 60Rr Units Under Age Reasi Of
Tender Value
50 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
18 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services, Repair And Desilting, Cleaning Manhole, Sewage Line, Cleaning/Repl. Pvc Tanks, Repair/Maint Of Internal Wiring, Fan, Geyser, Dg Sets, Securitylights For Hq 14 Sect, 63Rr,54Rr,33Rr,58Rr And 60Rr Units Under Age Reasi Of Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M & L for Rendering 10mm thick on fair faces of brick work in cement mortar 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 3 | M & L for Rendering 15mm thick on fair faces of brick surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for Rendering 10mm thick in CM 1:3 as in ceilings or concrete surfaces such as chajjas, upward faces, downward facias and similar items finished even and smooth including dubbing coat without using extra cement complete all as specified and directed. |
| 5 | Preparation of newly plastered surfaces of ceilling, upward facias etc and applying three coats of white washcomplete all as specified and directed. |
| 6 | Preparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over one coat of primer complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 7 | M&L for preparing the external newly Plastered surfaces of walls and applying two coat of Cement base paint over one coat of chalk whiting complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 8 | Preparation of old decorated surface of wall including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying one coat of oil Bound Distemper on wall complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 9 | Preparation of old decorated surface of wall including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying two coat of oil Bound Distemper on wall complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 10 | M &L for 3mm thick wall care putty on wall complete all as specified and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 11 | Preparation of old decorated surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint on wall complete all as specified and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 12 | Preparation of old decorated surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint on wall complete all as specified and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 13 | M&L for Complete removal of existing treatment and applying two coat of apex exterior quality over a coat of primer complete all as specified and directed. |
| 14 | Preparing Old steel painted surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coats of synthetic enamel paint in any pattern complete all as specified and directed. |
| 15 | Preparing Old wood and wood based surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | Demolition of trellis work (Jafri), including taking as under of battens intrellis (posts and rails measured separately) complete all as specified and directed. |
| 17 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed. |
| 18 | Writing letters or figures (Block, Roman, Italic or Indian) n exc. 30cm high complete all as specified and directed. |
| 19 | Stops, Commas,short lines, dashes, hyphens, brackets etc complete all as specified and directed. |
| 20 | Obliterating old writing of any description n.exc 0.1 Sqm with paint to match existing work complete all as specified and directed. |
| 21 | Making arrangements of scaffolding in building,cuting of small trees/plants, at stem removal of the roots of the plants by using acids, cutting around the spots for removing the roots any size and making good with cement motar 1:3 with PCC 1:2:4 including finishing with existing complete all as specified and directed. |
| 22 | Cleaning of sewage lines which are blocked /filled with sludge, semi solid/ material etc by roding manholes to manholes manually or by sewage cleaning machine without causing any damage to sewage line / manholes manholes covers taking out and refixing the covers and removing the sludge to a non inhabitant area or buried into ground all as specified for the 150mm internal dia of pipe complete all as specified and directed. |
| 23 | Cleaning of sewage lines which are blocked /filled with sludge, semi solid/ material etc by roding manholes to manholes manually or by sewage cleaning machine without causing any damage to sewage line / manholes manholes covers taking out and refixing the covers and removing the sludge to a non inhabitant area or buried into ground all as specified for the 100mm internal dia of pipe complete all as specified and directed. |
| 24 | Cleaning of septic tanks, soakage well of any capacity and manholes by Desludging / dewatering including inlet/ outlet chambers, removing out all scum, silt, residuals sludge (both organic and inorganic nature) after plugging the incoming sewage lines through combined high pressure water jetting cum suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the same in the tank to a place outside cantonment at the place meant for the purpose by local municipality, complete all as specified and directed. |
| 25 | Cleaning of blockage of any type of wc (Indian/pedestal) from WC pan to Ist manhole in single storied bldg including resetting/ refitting of asccess door in soil pipe where opened without causing any damage to the wc pan 'P' or 'S' trap and pipe including fitting complete all as specified and directed. |
| 26 | Cleaning of blockage of any type in Nahani trap provided in bath room, kitchen and indoor waste water pipe of kitchen sinks and WHB and removing all the sludge and foreign material from the trap and waste pipe from blocked trap to gully trap/ surface drain wherever opened or without causing any damage to the trap and pipe complete all as specified and directed. |
| 27 | Taking up or down steel tubing and connection for 15mm tubing incl cleaning for refing or removal complete all as specified and directed. |
| 28 | S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling / floor complete all as specified and directed. |
| 29 | Taking up or down steel tubing and connection for 20 mm tubing incl cleaning for refing or removal complete all as specified and directed. |
| 30 | S&F GI tubing 20 mm bore medium grade with all fittings fixed to wall, ceiling / floor complete all as specified and directed. |
| 31 | Cleaning of service RCC/Ferro/PVC service/over head tank cleaning process as under (a) Dewatering using submerssible pump/bailing out of water to dispose the minimum level of dirty water from the tank. (b) Cleaning the tank/ UG sump bottom, walls and ceiling using high pressure water jet to dislodge the algae calcinations, dirt etc.(c) Disposing the dirt water sludge etc., using specially designed sludge removal pump.(d) Cleaning the tank inside throughly by using industrial grade vaccum pump to make the tank inside free from dirt, algea and sludge etc.(e) Treating the inside walls, bottom, ceiling of tank including all nooks and corners by using and spraying anti bacterial agent such as hydrogenperoxide (bio degradable) for disinfection of tank inside.(f) Total disinfection and sterlisation of tank hyginecally cleaned and bacteria free and safeby Eco-Friendly for storage of water. Note :- Incl cleaning of outlet pipe upto stop cock/gate valve by removing and refixing the same and making the line serviceable after cleaning & Qty of tank are consider for cleaning twice in a Year and Date of cleaning to be written over head tank after cleaning. |
| 32 | For exc 250 ltrs and not exc 500 ltrs capacity |
| 33 | For exc 501 ltrs and not exc 1000 ltrs capacity |
| 34 | For exc 1001 lt and not exc 2000 lt capacty |
| 35 | For exc 2001 lt and not exc 5000 lt capacty |
| 36 | S & F Rotational moulded polyethylene water 500 ltr Capacity storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 20mmdia . (Minimum weight 2 0 m m - 2 1 0 g m s) Including taking down existing water tank and float valve complete all as specified and directed. |
| 37 | S & F Rotational moulded polyethylene water 1000 ltr Capacity storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 20mmdia . (Minimum weight 2 0 m m - 2 1 0 g m s) Including taking down existing water tank and float valve complete all as specified and directed. |
| 38 | Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 20mm complete all as specified and directed. |
| 39 | Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 15mm complete all as specified and directed. |
| 40 | S & F PVC (SWR) branch bends any radius 110mm bore of pipe in repairs complete all as specified and directed. |
| 41 | S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors in repairs complete all as specified and directed. |
| 42 | S&L in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 43 | S&F as in repair Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified and directed. |
| 44 | Supply & fixed PVC flushing cistern low level of capacity of 10 ltr, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets and fixed in repair complete all as specified and directed. |
| 45 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 46 | Excavation in trenches in soft/ loose soil exc 1.5 m deep and getting out including forming bottom to required level or slop for laying pipe, concrete bed manhole etc n.exc 10 Sqm on plan complete all as specified and directed. (pipe and concrete bed shall be measured and paid separately ) |
| 47 | Returning filling in soft/ loose soil including spreading levelling ,watering and well ramming in layers not exc 25 mm thick complete all as specified and directed. |
| 48 | Removing of excavated surplas materials to a distance exc 50 m but nexc 100 mm and depositing where directed a level n.exc 1.5 mtrs above the starting point complete all as specified and directed. |
| 49 | Demolition or breaking up 150 mm dia drain pipe including fittings of any desciption in any position and removing rubbish upto a distance of n. exc 50 mtr complete all as specified and directed. |
| 50 | M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 for 150 m bore of pipe complete all as specified and directed. |
| 51 | M&L Reinforced concrete pipes, class NP3, laid and jointed complete with collars 150 mm bore laid in trenches and jointed with CM 1:1 complete all as specified and directed. |
| 52 | Demolition of brick work of any description and in any position built in CM and removing rubbish upto a distance of n exc 50 mtr complete all as specified and directed. |
| 53 | M&L for brick work built in CM 1:4 with sub class 'B' bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 54 | Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 55 | M&L for rendering 15 mm thick on fair faces of brick work internal faces in manhole/drains in CM 1:4 using WPC as per manufacturer instruction incl finishing the surfaces even & smooth without using extra cement complete all as specified and directed. |
| 56 | M&L rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & fair in CM 1:6 complete all as specified and directed. |
| 57 | Supply only integral water proofing compound ISI marked complete all as specified and directed. |
| 58 | M & L PCC 1:3:6 20 mm graded as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water roughs and the like including weathering, slightly rounded or hamfered angles and throating, complete all as specified and directed. |
| 59 | Demolition of reinforced cement concrete as in cover slabs of any description, removal of debris to beyond MoD land complete all as specified and directed. |
| 60 | M&L for precast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in manhole cover slab with plain fair faces and set in CM 1:4 complete all as specified and directed. |
| 61 | M & L mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 62 | All as per Ser item No 57 but 10 mm dia MS round bar as in handle |
| 63 | M& L Excavating in post holes (or similar holes)in hard dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 64 | M&L PCC 1:4:8 Type D2( using 40mm graded crushed stone agg) , as in fdn filling and mass concrete complete all as specified and directed. |
| 65 | S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 complete all as specified and directed. |
| 66 | M&L for Preparing steel painted New previously un-treated surface to receive painting, including washing and cleaning, one coat priming with Red oxide zinc chrome etc. over 10cm in width or girth, not otherwise described & applying tow coats of synthetic enamel paint in any pattern complete all as specified and directed.Note: 1. The schedule rates include collecting of complaints from the concerened JE and returning done complaints at the earliest.2. The quantities are tentative and are liable to change as per day to day complaints .3. The Quantities are to be executed in day to day complaints and can not be explained at the time of handing over of site.4. Details of all the compliants attended shall be maintained in a register by contractor which will be signed by JE, Engr-in-Charge and contractor and the same will be produced alongwith RAR/FB. |
| 67 | Taking down carefully surface aluminium or copper point wiring with PVC casing-caping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed. |
| 68 | M&L for point wiring in repair with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete all as specified and directed. as required for the following :- |
| 69 | One light point controlled by one switch. |
| 70 | One fan point controlled by one switch. |
| 71 | One socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 72 | One socket outlet 6 amp controlled by one switch on indepdendent board. |
| 73 | One bell point controlled by one bell push. |
| 74 | M&L for point wiring in repair with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets for one 16 amp socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 75 | S&F angle holder,in repair insulated polycabonate body with back plate complete all as specified and directed. |
| 76 | S&F in repair switch piano flush button single pole one way 6 amp complete all as specified and directed. |
| 77 | S&F in repair switch piano flush button single pole one way 16 amp complete all as specified and directed. |
| 78 | S&F in repair socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed. |
| 79 | S&F in repair socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed. |
| 80 | S&F in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 81 | S&F in repair Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and directed. |
| 82 | S&F in repair Plug Top of socket outlet 6 amp complete all as specified and directed. |
| 83 | S&F in repair Plug Top of socket outlet 16 amp complete all as specified and directed. |
| 84 | S&F in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp box type complete universal complete all as specified and directed. |
| 85 | S&F in repair Switch socket combination 2 in 1, 3 pin, 5 Amp box type complete universal complete all as specified and directed. |
| 86 | S & F in repair Modular switch 5/6 Amps suitable for 1 Module complete all as specified. |
| 87 | S & F in repair Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed. |
| 88 | S & F in repair Modular switch 15/16 Amps suitable for 1 Module complete all as specified and directed. |
| 89 | S & F in repair Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed. |
| 90 | S & F in repair Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified and directed. |
| 91 | S&F in repair ceiling rose 3 plates polycarbonate body complete all as specified and directed. |
| 92 | S&Fin repair hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed. |
| 93 | S&F in repair bell push, flush type, 6 amp 240 volts complete all as specified and directed. |
| 94 | S&F in repair door bell, AC, 240 volts, single pole complete all as specified and directed. |
| 95 | M&L in repair for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and directed. |
| 96 | S&F in repair MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and directed as required with following ratings & ways:- |
| 97 | SPN, in repair 240 volts, 4 ways. |
| 98 | SPN, in repair 240 volts, 8 ways. |
| 99 | SPN, in repair 240 volts, 12 ways. |
| 100 | S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed of following ratings:- |
| 101 | Single pole 6 to 32 amp. |
| 102 | Single pole 40 to 63 amp. |
| 103 | Double pole 10 to 32 amp. |
| 104 | Four pole 40 to 63 amp. |
| 105 | S&F in repair LED tube light batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 22 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete all as specified and directed. |
| 106 | S&F in repair LED (bulb) fixture 12 watt including connection complete all as specified and directed. |
| 107 | S&F in repair LED (bulb) fixture 10/9 watt including connection complete all as specified and directed. |
| 108 | S&F in repair LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified and directed. |
| 109 | Supply only Following items :- |
| 110 | PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm. |
| 111 | PVC insulated FRLS multistranded copper conductor cable 2.5 Sqmm. |
| 112 | Angle holder,in repair insulated polycabonate body with back plate |
| 113 | Switch piano flush button single pole one way 6 amp |
| 114 | Switch piano flush button single pole one way 16 amp |
| 115 | Socket outlet 2 in 1, 3 pin 6 & 16 amp flush type |
| 116 | Socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type |
| 117 | Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universa |
| 118 | Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universa |
| 119 | Plug Top of socket outlet 6 amp |
| 120 | Plug Top of socket outlet 16 amp |
| 121 | Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp box type universal |
| 122 | Switch socket combination 2 in 1, 3 pin, 5 Amp box type universal |
| 123 | Modular switch 5/6 Amps suitable for 1 Module |
| 124 | Modular socket 5 pin 5/6 Amps suitable for 2 Module |
| 125 | Modular switch 15/16 Amps suitable for 1 Module |
| 126 | Modular socket 5/6 pin 15/16 Amps suitable for 2 Module |
| 127 | Modular Fan step Regulator electronic, 120 watts 2 Module |
| 128 | Ceiling rose 3 plates polycarbonate body |
| 129 | Hum free electronic step fan regulator 120 - 280 volts of 100 watt |
| 130 | MCBs of 'C' series having breaking capacity 10 KA, ISI marked Single pole 6 to 32 amp. |
| 131 | MCBs of 'C' series having breaking capacity 10 KA, ISI marked Single pole 40 to 63 amp. |
| 132 | MCBs of 'C' series having breaking capacity 10 KA, ISI marked Double pole 10 to 32 amp. |
| 133 | MCBs of 'C' series having breaking capacity 10 KA, ISI marked Double pole, 40 to 63 amp. |
| 134 | LED tube light batten (1.2 m) 22 Watt |
| 135 | LED (bulb) fixture 10/9 watt |
| 136 | Supply only in repair LED fixture 18 watt |
| 137 | LED bulkhead fitting 9 watt |
| 138 | Recessed mounted LED (Ceiling light) luminaire suitable for 2'x2' , 36 watt |
| 139 | Taking down unsv ceiling fans 1200/1400 mm sweep 230 v, AC supply, single phase from site, depositing in MES store yard, dismantling all parts, checking serviceability of all parts & continuity of copper winding, (Burn out winding Fan should be staking aside for rewinding), including cleaning all the components of fan, oiling , greesing, including replacement of rusted /unsv nuts, bolts split pin rubber reel , machine screws, shaft, capacitor, clamps,etc as required, reassembling the fan and testing complete all as specified and directed.Note:- (i) Rewinding of fans should be measure and paid separately under appropriate items of schedule (ii) Major parts like Fan capacitor, clamps with rubber real etc measured and paid separately as Supply only items (iii) Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site. |
| 140 | Taking down unsv Exhaust Fan 200/230/300 mm sweep 230 v, AC supply, single phase from site, depositing in MES store yard, dismantling all parts, checking serviceability of all parts & continuity of copper winding, (Burn out winding Fan should be staking aside for rewinding), including cleaning all the components of fan, oiling , greesing, including replacement of rusted /unsv nuts, bolts split pin rubber pad , machine screws, shaft, capacitor, clamps, etc as required, reassembling the fan and testing complete all as specified and directed.Note:- (i) Rewinding of fans should be measure and paid separately under appropriate items of schedule (ii) Major parts like Fan capacitor, clamps with rubber Pad etc measured and paid separately as Supply only items (iii) Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site. |
| 141 | Taking out, burnt winding wire from ceiling fans (Which required rewinging, Obtained from item No.98) motor of 1200/1400 mm sweep 230 v, AC supply, single phase, Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & size, thoroughly cleaning all the components of fan, oiling , greesing, replacement of rusted /unsv nuts, bolts split pin rubber reel , machine screws, shaft etc as required reassembling the fan, testing complete & Transporting back to MES store yard complete all as specified and directed. |
| 142 | Taking out, burnt winding wire from Exhaust fans (Which required rewinging, Obtained from item No.99) motor of 300 mm sweep 230 v, AC supply, single phase, Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & size, thoroughly cleaning all the components of fan, oiling , greesing, replacement of rusted /unsv nuts, bolts split pin rubber Pad , machine screws, shaft etc as required reassembling the fan, testing complete & Transporting back to MES store yard complete all as specified and directed. |
| 143 | All as per Srl Item No 97 above but for exhaust fan of size 400/450 mm complete all as specified and directed. |
| 144 | S&f in replacement of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods complete all as specified and directed. |
| 145 | S&f in replacement ball bearing of ceiling / exhaust fan of any sweep complete all as specified and directed. |
| 146 | S&F in replacement condensor 1.5 MFD suitable for PVC exhaust fan / wall mounting fan of any sweep complete all as specified and directed. |
| 147 | S&F in replacement condensor 2.5 MFD suitable for ceiling fan / wall mounting fan of any sweep complete all as specified and directed. |
| 148 | S&F in replacement condensor 4 MFD suitable for PVC exhaust fan of any sweep complete all as specified and directed. |
| 149 | M&L for spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the MES fan numbers etc with black paint complete all as specified and directed. |
| 150 | M&L for spray painting of Metalic body Exhaust fan, fan blades etc with a coat of synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the MES fan numbers etc with black paint complete all as specified and directed. |
| 151 | S&F motor of Exhaust Fan Capacity 300 mm including taking down of old unsv motor complete all as specified and directed. |
| 152 | S&F 1200 mm sweep ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V. Min air delivery 210 CFM, Five star rating complete all as specified and directed.Note: Old unsv Ceiling Fan will be deposited in MES store yard. |
| 153 | Supply & fix Exhaust fans made of sturdy Engineering plastic complete with louvers shutter, 230 Volt, 50 Hz, RPM 1200, copper winding of sweep 200/250 mm, incl all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, and testing complete all as specified and directed.Note: Old unsv Exhaust fan will be deposited in MES store yard. |
| 154 | Replacement of old unserviceable ceiling fan blades made of MS sheet duly powder coated ,of type make and colour as of ceiling fan suitable for 1200mm sweep ceiling fan of any make incl all accessories complete all as specified and directed. |
| 155 | Replacement of Blade assembly of Exhaust fan with fixing hexagonal nut of size 300/450mm complete all as specified and directed.. |
| 156 | Replacement of iron Frame of exhaust fan 300/450 mm sweep 4 way with welded and painted complete all as specified and directed. |
| 157 | M&L for Gun metal bush of exhaust fan complete all as specified and directed. |
| 158 | S&F in replacement of PVC canopy suitable for ceiling fan complete all as specified and directed. |
| 159 | S&F in replacement of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete all as specified and directed. |
| 160 | S&F in replacement of down rod of ceiling fan made of GI pipe medium grade 15 mm bore of length upto 600 mm including cutting, threading, painting etc as required complete all as specified and directed. |
| 161 | S&F in replacement and connecting new fan motor, single phase 230 volt 50 Hz copper wounded three speed suitable for desert cooler up to 500 mm sweep size etc complete including dismantling and removing of existing unserviceable fan motor with blades from the desert cooler of any make/type/capacity including removing of all accessories etc complete all as specified and directed. |
| 162 | S&F in replacement of submersible type tullu pump for desert cooler of capacity 1/85 HP, single phase 230 volt 50 Hz copper bound etc incl fixing accessories complete all as specified and directed. |
| 163 | S&F in replacement of wooden wool pads including wire mesh suitable for up to 5000 cuf/M complete all as specified and directed. (Note :- Weight will be measured dry). |
| 164 | Taking down of desert cooler fixed at any position, cleaning internally and externally by scraping all scales dirt etc and repairs to desert cooler to check leakage, tightening ( By replacing screws, nuts and bolts etc ) including painting of desert cooler with spray machine with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer, letters, Refixing of the desert cooler after necessary oilling and greasing of fan and water lifting pump complete all as specified and directed. |
| 165 | S&F in replacement of side grill made out of 22 SWG gauge Gl sheet including applying two coats of spray paint of off white I grey colour over one coat of primer (red oxide) suitable for desert cooler of capacity up to 5000 cuff min complete all as specified and directed. |
| 166 | S&F in replacement of PVC pipe of 15 mm dia with water PVC Three way water distributor, heavy duty and PVC elbow complete all as specified and directed. |
| 167 | S&F in replacement of desert cooler body made of 20 guage PGI Sheet suitable for evaporative type desert cooler of any size including side panel-03 Nos and front grill with 20 guage PGI sheet and water tank height 20 cm and grill with fins, electriclal wiring and connection with on/off switch piano type with distribution PVC cable 3 core 23/0.0076-3m with top plug 5 Amp-Ol No, 15mm float vlave-01 including duly painted complete body internaly and externaly and all side panel inner and outer side applying two coats of synthetic enamel paint by spraying with gun of approved colour over a coat of red oxide primer complete all as specified and directed. |
| 168 | S&F in replacement of selector switch single phase 230 volts, ISI marked complete all as specified and directed. |
| 169 | Re-wiring of desert cooler with suitable size of copper conductor PVC insulated cable and providing main lead three metre long of 3 core PVC insulated copper conductor of size 23/ .0076 complete all as specified and directed. |
| 170 | S&F in replacement of legs for fan motor for desert cooler made out for 18 SWG MS plate complete all as specified and directed. |
| 171 | Dismantling and taking out Old, Unservicable fan motor from the desert cooler and Rewinding with supper enamel copper winding wire of suitable size, varnishing etc including replacement of bushes, assembling testing and refixing at the existing site complete all as specified and directed. |
| 172 | M& L for fabrication of desert cooler stand made out of MS angle iron 40x40x6mm thick all as per existing size suitable at site incl painting ith two coats of synthetic enameld paint over a coat of red oxide primer coat replacement complete all as specified and directed. |
| 173 | S&F in replacement of factory made PVC fan blade suitable for desert cooler of capacity up to 5000 cuf/Min complete all as specified and directed. |
| 174 | S&F in replacement of factory made metalic fan blade suitable for desert cooler of capacity up to 5000 cuf/Min complete all as specified and directed. |
| 175 | S&F in replacement of front grill made out of Gl sheet of 20 SWG gauge including applying two coats of spray paint of off white/gray colour over one coat of primer (red oxide) suitable for desert cooler of capacity up to 5000 cuf/Min complete all as specified and directed. |
| 176 | Disconnecting the inlet and outlet connections of the existing Geyser 25/50 Ltr, taking down carefully, cleaning/descaling the blocks both in GI pipes and water heater refixing the bolts by proper grouting in the wall and refixing the water heater in the same or in other places complete all as specified and directed. |
| 177 | S&F in place of unsv PVC connection (ISI Mark) having 10mm dia, 45 cm long with steel reinforcement suitable for hot & cold water geyser outlet supply with 02 Nos of Unions/ cup shaped cover with washers complete all as specified and directed. |
| 178 | S&F in Replacement of unserviceable heating element of geyser 2KW/1.5 KW complete all as specified and directed. |
| 179 | S&F in Replacement of unserviceable thermostat of geyser 2KW/1.5 KW complete all as specified and directed. |
| 180 | S & F in replacement of pressure release valve suitable for 25/50 ltr electric water heater complete all as specified and directed. |
| 181 | S&F in replacement of U/S apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete all as specified and directed. |
| 182 | S&F in Replacement of unserviceable Inner Tank of geyser steel body of capaciy 25/50 Ltrs complete all as specified and directed. |
| 183 | S&F in Replacement of unserviceable PVC flexible pipe inlet 16mm outer dia and 450 mm long for hot/cold water heavy duty with brass nuts & bolts complete all as specified and directed. |
| 184 | Disconnecting the inlet and outlet connections of the existing solar water heater 300 Ltr, taking down carefully, cleaning/descaling the blocks both in GI pipes and water heater refixing the bolts by proper grouting in the wall and refixing the water heater in the same or in other places complete all as specified and directed. |
| 185 | S&F in Replacement of unserviceable heating element of solar water heater 300 Ltr 2KW/1.5 KW complete all as specified and directed. |
| 186 | S&F in Replacement of unserviceable thermostat of solar water heater 300 Ltr 2KW/1.5 KW complete all as specified and directed. |
| 187 | S&F in replacement of apparatus plate of solar water heater 300 Ltr 25/50 litre capacity by brazing not exceeding 5 mm thick complete all as specified and directed. |
| 188 | S&F in Replacement of unserviceable float valve with new brass Float valve of desert coolers complete any make 15 mm dia complete all as specified and directed. |
| 189 | Supply following Items :- |
| 190 | Rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods complete all as specified and directed. |
| 191 | Condensor 1.5 MFD suitable for PVC exhaust fan / wall mounting fan complete all as specified and directed. |
| 192 | Condensor 2.5 MFD suitable for ceiling fan / wall mounting fan complete all as specified and directed. |
| 193 | Condensor 4 MFD suitable for PVC exhaust fan of any sweep complete all as specified and directed. |
| 194 | Ceiling fan blades made of MS sheet duly powder coated complete all as specified and directed. |
| 195 | Blade assembly of Exhaust fan with fixing hexagonal nut of size 300/450mm complete all as specified and directed. |
| 196 | Down rod of ceiling fan made of GI pipe medium grade 15 mm bore of length upto 600 mm complete all as specified and directed. |
| 197 | Submersible type tullu pump for desert cooler of capacity 1/85 HP, single phase 230 volt 50 Hz copper bound etc incl fixing accessories complete all as specified and directed. |
| 198 | Wooden wool pads including wire mesh suitable for up to 5000 cuf/M complete all as specified and directed. |
| 199 | PVC pipe of 15 mm dia with water PVC Three way water distributor, heavy duty and PVC elbow complete all as specified and directed. |
| 200 | PVC fan blade suitable for desert cooler of capacity up to 5000 cuf/Min complete all as specified and directed. |
| 201 | PVC connection of any make with (ISI Mark) having10mm dia, 45 cm long with steel reinforcement suitable for hot & cold water geyser outlet supply with 02 Nos of Unions/ cup shaped cover with washers complete all as specified and directed. |
| 202 | Heating element of geyser 2KW/1.5 KW complete all as specified and directed. |
| 203 | Thermostat of geyser 2KW/1.5 KW complete all as specified and directed. |
| 204 | Pressure release valve suitrable for 25/50 ltr electric water heater complete all as specified and directed. |
| 205 | Apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete all as specified and directed. |
| 206 | Inner Tank of geyser steel body of capaciy 25/50 Ltrs complete all as specified and directed. |
| 207 | PVC flexible pipe inlet 16mm outer dia and 450 mm long for hot/cold water heavy duty with brass nuts & bolts complete all as specified and directed. |
| 208 | Heating element of solar water heater 300 Ltr 2KW/1.5 KW complete all as specified and directed. |
| 209 | Thermostat of solar water heater 300 Ltr 2KW/1.5 KW complete all as specified and directed. |
| 210 | Apparatus plate of solar water heater 300 Ltr 25/50 litre complete all as specified and directed. |
| 211 | Float valve with new brass Float valve of desert coolers complete all as specified and directed. |
| 212 | Taking out existing unserviceable compressor sealed unit from window/split type air conditioner 1.5 Ton capacity including removal of unserviceable strainer filter etc. complete all as specified and directed. |
| 213 | S&F in replacement and connecting of new compressor sealed unit of capacity 1.5 Ton for window/ split type suitable for air conditioner of any make/as per existing type including replacement of foundation bolts, rubber pad, strainer capillary tubes, suction and discharge pipe line, wiring kit, vacuuming the system, supply and charging Gas (R-22/R-134A), detection of leakage etc., brazing and testing to achieve proper cooling effect complete all as specified and directed. |
| 214 | M&L for leak detection by nitrogen pressure test in refrigerant system for split/ window type AC 1.5 TR capacity, cutting brazing and making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas of any type as required quantity to achieve desired cooling including installation at site and testing on full load for 24 hours complete all as specified an directed. (Note:- Additional gas required will be measured & paid separately under relevant item as supply only). |
| 215 | Taking blower motor from air conditioner of 1.5 Ton capacity and make / and fixing as per existing type and replacing with the new motor, single phase, 200/230 volt, 50 Hz, 1/5 HP capacity, ISI Marked in the same position, testing etc complete all as specified and directed. |
| 216 | S&F in replacement of running capacitor (36 mfd) suitable for air conditioner of any make / type / capacity including making connection etc complete all as specified and directed. |
| 217 | S&F in replacement of starting capacitor (100/120 mfd) suitable for air conditioner of any make / type / capacity including making connection etc complete all as specified and directed. |
| 218 | S&F in replacement of thermostate switch of temperature range of 160C to 300C suitable for air conditioner of any make / type I capacity including making connection etc complete all as specified and directed. |
| 219 | S&F in replacement of grill with knob made of fiber plastic body suitable for window type AC of any make /type/ capacity complete all as specified and directed. |
| 220 | S&F in repair of factory made wall mounted/ floor mounted type AC outdoor unit (coloured) stand of superior quality ISI Marked suitable for AC of 1.5 TR capacity complete all as specified and directed. |
| 221 | S&F in replacement of starting relay suitable for air conditioner of any make / type / capacity including making connection etc complete all as specified and directed. |
| 222 | S&F in replacement of plastic filter for window type AC 1.5 ton capacity complete all as specified and directed. |
| 223 | S&F in replacement of fan motor ISI marked for indoor unit of split type air conditioner of any make / type and capacity including making connection etc complete all as specified and directed. |
| 224 | S&F in replacement of fan motor ISI marked for outdoor unit of split type air conditioner of any make / type and capacity including making connection etc complete all as specified and directed. |
| 225 | Repair/ replacement of electronic control circuit card suitable for air conditioner of any make I type and 1.5 ton capacity including making connection etc complete all as specified and directed. |
| 226 | M&L for servicing of split/ window type air conditioner of capacity 1.5 Ton of any make and type by replacing unserviceable compressor and other parts from the machine including charging of refrigerant gas and changing of wiring with proper size PVC insulated wires as directed by replacing air filter, oiling of blower, condensor fan motors, replacement of bushes 2 Nos for fan motor, cleaning of condensor coil by high pressure water & cleaning liquid complete as directed, installing the air conditioner at location where directed after proper repair and testing complete at site as per the satisfaction of Engineer-in-Charge complete all as specified and directed.(Note • M&L for replacement of compressor, spare parts and gas shall be measured and paid separately under relevant items). |
| 227 | M&Lfor scraping of old paint by wire brush from body of window type AC and applying base material for smooth surface and applying 2 coat of synthetic enameled spray paint with gun over one coat of primer complete all as specified and directed. |
| 228 | S&F in replacement of plastic filter for split type AC 1.5 ton capacity complete all as specified and directed. |
| 229 | S&F in replacement of cooling coil 1.5 ton split type AC complete all as specified and directed. |
| 230 | Supply and fixing in replacement sheet metal enclosure industrial type complete plug socket, plug top and earth plug complete with SP MCB 20 Amp complete all as specified and directed. |
| 231 | Supply and replacement of fan blade suitable for split type/ window AC capacity 1.5 ton as per sample complete all as specified and directed. |
| 232 | S&F in replacement of plug top 3 Pin 5 Amp 240 volts complete all as specified and directed. |
| 233 | S&F in replacement of plug top 3 Pin 15 Amp 240 volts complete all as specified and directed. |
| 234 | Taking down existing unserviceable outdoor unit and supply and fix for new outdoor unit for 1.5 TR capacity split AC suitable for working with and including non CFC refrgerant gas with blower fan motor, cooling coil all pre-wired with compressor of make as per existing complete all as specified and directed. |
| 235 | S&F in replacement for indoor unit for split type air conditioner+ 10% capacity wall mounted operation on 230 volts 1.5 ton 50 HZ single phase performing on cooling, dehumidifying, cord less, remote and digital temp display system including fan motor of make as per existing including taking down of old existing unserviceable one, complete all as specified and directed. |
| 236 | M&L for sub main wiring PVC insulated, 1100 volts grade single core multistranded copper conductor FRLSH cable conforming to IS specifications, 2 run of 4 sqmm including 1 run of 4 sqmm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25mm dia rigid PVC conduit and conduit accessories fixed on wall/ ceiling etc or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring. Note: Three runs of 4Sqmm FRLSH PVC insulated 1100 volts grade cable and One run of PVC conduit shall constitute as 1 RM for the measurement purpose. |
| 237 | Taking out unserviceable compressor from refrigerator of capacity 175 to 360 ltr of any make by un-screwing from base plate after disconnecting all electrical and suction / discharge pipe connections complete and providing all electrical connections to respective terminals including changing of unserviceable connecting wires as per the existing charging of refrigerant gas as per requirement to achieve proper cooling effect and testing on completion complete all as specified and as directed. (Note :- M&L in replacement of compressor (sealed unit), Gas and Parts required for satisfactory repair shall be paid and measured separately under relevant items). |
| 238 | Supply and fixing in replacement and connecting of new compressor sealed unit suitable for refrigerator of capacity300/ 310/ 360 ltrs and any make/type, medium temperature range, including replacement of foundation bolts, rubber pad, strainer, capillary tubes, suction and discharge pipe line, vacuuming the system, supply and charging Gas (R-22/R134A), detection of leakage etc., brazing and testing to achieve proper cooling effect complete all as specified and directed. |
| 239 | All as per ser item No 171 above but for capacity 175/180 ltrs. |
| 240 | M&L for leak detection by nitrogen pressure test in refrigerant system of Refrigerator of any capacity and make, by cutting brazing and making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas of any type as required quantity to achieve desire cooling including installation at site and testing on full load for 24 hours complete all as specified an directed. (Note:- Supply and charging additional gas required will measured & paid separately under relevant item.) |
| 241 | S&F in replacement of starting relay and over load protector ISI marked suitable for refrigerator of any make/ type/capacity including making connection complete all as specified an directed. |
| 242 | S&F in replacement of thermostat switch with knob ISI marked suitable for refrigerator of any make/ type/ capacity including making connection complete all as specified an directed. |
| 243 | Supply and fixing in replacement of cabinet bulb with door switch ISI marked suitable for refrigerator of any make/ type/ capacity including making connection complete all as specified an directed. |
| 244 | S&F in replacement of vegetable tray of single/ two pieces type suitable for refrigerator of any make/ type/ capacity complete all as specified an directed. |
| 245 | S&F in replacement of crisper tray suitable for refrigerator of any make/ type/ capacity complete all as specified an directed. |
| 246 | S&F in replacementof bottle shelf/ egg shelf suitable for refrigerator of any make/ type/ capacity complete all as specified an directed. |
| 247 | S&F in replacement of magnet type door gasket suitable for refrigerator of any make/ type/ capacity complete all as specified an directed. |
| 248 | S&F in replacement of toughened glass self/ cover for vegetable tray suitable for refrigerator of any make/ type/capacity complete all as specified an directed. |
| 249 | S&F in replacement of evaporator coil ISI marked suitable for refrigerator of any make/type/capacity including making connection complete all as specified an directed. |
| 250 | S&F in replacement of condenser coil ISI marked suitable for refrigerator of any make/type/capacity including making connection complete all as specified an directed. |
| 251 | S&F in replacement fan motor for refrigerator 175/ 180/ 300/ 310/ 360 ltrs capacity complete as per existing make all as specified and directed |
| 252 | S&F in replacement freezer with cooling/pipe capillary or compressed freezer complete for refrigerator 175/ 180/ 300/ 310/ 360 ltrs as per existing make complete all as specified and directed. |
| 253 | S&F in replacement PC Board for 175 to 360 ltr refrigerator suitable make complete all as specified an directed. |
| 254 | Supply and fixing in replacement of timer for refrigerator ISI marked complete all as specified an directed. |
| 255 | Taking out existing unserviceable compressor sealed unit from the water cooler of any make/ type/ capacity including removing of all other unserviceable pans/ spares such as strainer filer, capillary tube, suction / discharge pipe, thermostat switch, float valve, push cook running capacitor, starting capacitor, over load relay etc complete all as specified an directed. |
| 256 | S&F in replacement and connecting of new compressor sealed unit suitable for water cooler of any make/ type, 120/150 ltr/ hr cooling capacity, medium temperature range, including replacement of filter and making connection, vacuuming the system, supply and charging Gas (R-22/R134A/R-410A), detection of leakage etc., brazing and testing to achieve proper cooling effect complete all as specified an directed. |
| 257 | All as per srl item No 189 above but water cooler of any make / type and 40/80 ltr/ hr cooling capacity complete all as specified and directed. |
| 258 | M&L for leak detection by nitrogen pressure test in refrigerant system of water cooler of any make/ type of 40/801trs/ hr cooling capacity, by cutting, brazing and making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas of any type as required quantity to achieve desired cooling including installation at site, testing of water cooler on full load for 24 hours continuously complete all as specified an directed. (Note:- Supply additional gas required will measured & paid separately under relevant item). |
| 259 | S&F in replacement of fan motor ISI marked in existing water cooler of any make/type/capacity including all fixing accessories etc complete all as specified an directed. |
| 260 | S&F in replacement of fan motor blade ISI marked PVC/ metallic type in existing water cooler of any make/type/ capacity including all fixing accessories etc complete all as specified an directed. |
| 261 | S&F in replacement and connecting of running capacitor 30 Mfd ISI marked in existing water cooler of any make/ type/ capacity including fixing accessories etc complete all as specified an directed. |
| 262 | S&F in replacement and connecting of thermostat switch ISI marked in existing water cooler of any make/type/ capacity including fixing accessories etc complete all as specified an directed. |
| 263 | S&F in replacement and connecting of chromium plated push cock tap, in existing water cooler of any make/ type/ capacity including fixing accessories etc complete all as specified an directed. |
| 264 | S&F in replacement and connecting of PVC heavy duty waste water pipe of 32/40 mm size and min 1.5 m long, including repair of waste water tray in existing water cooler of any make/type/capacity including fixing accessories etc complete all as specified an directed. |
| 265 | S&F in replacement of damaged water tank from water cooler of any make/type but of capacity 120/150 ltr and supply & fl)dng new stainless steel water tank ISI marked including fixing accessories etc complete all as specified an directed. |
| 266 | All as per srl item No 198 above but water cooler of any make/type but of 40/80 ltr capacity. |
| 267 | S&F in replacement of evaporator coil ISI marked suitable for water cooler of any make/ type/ capacity including fixing accessories and making connection charging etc, complete all as specified an directed. |
| 268 | S&F in replacement of condenser coil ISI marked suitable for water cooler of any make/ type/ capacity including fixing accessories and making connection etc complete all as specified an directed. |
| 269 | M&L for repairing to base/stand of water cooler of any make/type/capacity including welding of MS/GI sheet 16 SWG of suitable size to fill up rusted patches, grinding and applying base material for smooth surface and applying two coats of synthetic enameled spray paint of existing colour over one coat of primer etc complete all as specified an directed. |
| 270 | M&L for scraping of old paint / rust etc by wire brush from body of water cooler of any make/type/capacity and applying base material for smooth surface and applying two coats of synthetic enameled spray paint over one coat of primer after denting etc complete all as specified an directed. |
| 271 | S&F in replacement for capacitor 4.00 Mfd for water cooler and desert cooler fan motor complete all as specified an directed. |
| 272 | S&F in replacement of water cooler body 40/80 ltr/hr capacity including fan motor, running capacitor, starting capacitor, evaporator coil, condensor coil, water tank, thermostat switch and all electrical connections complete all as specified an directed. |
| 273 | S&F in replacement of starting relay/ overload protector suitable for water cooler of any size/ type as per site requirement complete all as specified an directed. |
| 274 | Taking out compressor sealed unit from deep freezer any capacity and make including removal of unserviceable parts/ spares, such as over load protector, strainer capillary tube etc complete all as specified an directed. |
| 275 | M&L for replacement of unserviceable sealed unit (compressor) with new sealed unit (compressor) for deep freezer capacity 210/ 320/ 350/ 425 ltres, including vacuuming the system, supply and charging Gas at rated pressure, detection of leakage etc., brazing and testing to achieve proper cooling effect complete all as specified and directed. |
| 276 | M&L for leak detection by nitrogen pressure test in refrigerant system of deep freezer of any make/type/ capacity, by cutting, brazing and making leak-proof the gas system, cleaning, vacuum the gas system and charging suitable gas of any type as required quantity to achieve desire cooling including installation at site, testing of water cooler on full load for 24 hours continuously complete all as specified an directed. (Note:- Supply of additional gas required will measured & paid separately under relevant item). |
| 277 | S&F in replacement of thermostat suitable for deep freezer 210/ 320/ 350/ 425 ltrs capacity complete all as specified an directed. |
| 278 | S&F in replacement starting relay of deep freezer of different make and capacity 210/ 320/ 350/ 425 ltrs complete all as specified and directed. |
| 279 | S&F in replacement of fan motor for deep freezer 210/ 320/ 350/ 425 Hrs capacity complete all as specified an directed. |
| 280 | S&F in replacement of toughened fibre body with glass wool/ foam insulation including top cover suitable for 210/ 320/ 350/ 425 ltr capacity deep freezer body including copper cooling coil of specified dia and length for smooth cooling complete all as specified an directed. |
| 281 | S&F in replacment of condensing coil for 210/ 320/ 350/ 425 ltr capacity deep freezer complete all as specified an directed. |
| 282 | Repairs to voltage stabilizer of any make, single phase with input voltage 135 - 190 V and out put voltage 200-240 volt, capacity 5 KVA by dismantling and taking out burnt main transformer and rewinding with super enamelled copper wire of suitable size including varnishing and insulation material etc,complete all as specified an directed. |
| 283 | All as per srl item No 215 above but for capacity 03 KVA |
| 284 | All as per srl item No 215 above but for capacity 01 to 02 KVA |
| 285 | S&F in replacement of old voltmeter 0-300 volt range complete all as specified an directed. |
| 286 | S&F in replacement of old analog type AC ammeter 0-100 amp range complete all as specified an directed. |
| 287 | S&F in replacement of indicator lamp neon type green/ red etc complete all as specified an directed. |
| 288 | S&F in replacement of relay 24 volt, 25 Amps, ISI marked suitable for voltage stabilizer of any type/ make / capacity etc complete all as specified an directed. |
| 289 | S&F in replacement of electronic circuit ISI marked suitable for voltage stabilizer of any type/make/capacity etc complete all as specified an directed. |
| 290 | S&F of voltage stabilizer, copper wound of 5 KVA capacity digital display type having I/P correction range of 140-280 volt complete all as specified an directed. Note : - Old unsv voltage stabilizer will be deposited to MES store yard. |
| 291 | S&F of voltage stabilizer, copper wound of 3 KVA capacity digital display type having I/P correction range of 140-280 volt complete all as specified an directed. Note : - Old unsv voltage stabilizer will be deposited to MES store yard. |
| 292 | S&F of voltage stabilizer, copper wound of 1 KVA capacity digital display type having I/P correction range of 140-280 volt ccomplete all as specified an directed. Note : - Old unsv voltage stabilizer will be deposited to MES store yard. Please Enable Macros to View BoQ information |
| 293 | S&F of voltage stabilizer, copper wound of 1 KVA capacity digital display type having I/P correction range of 140-280 volt ccomplete all as specified an directed. Note : - Old unsv voltage stabilizer will be deposited to MES store yard. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender