Tender For Provision Of Hard Stand (Raised Platform) Near Badminton Court, Kamat Bay And Provision Of Hard Standing And Chain Link Fencing At Blo (Kar) And Station Clothing Centre (Scc).
Tender Value
44.18 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
17 days left
EMD
88360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Hard Stand (Raised Platform) Near Badminton Court, Kamat Bay And Provision Of Hard Standing And Chain Link Fencing At Blo (Kar) And Station Clothing Centre (Scc).
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep, and getting out in hard/dense soil. |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep, and getting out in hard/dense soil. |
| 3 | Removal of surplus soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point. |
| 4 | Returning, filling in, including spreading, levelling, watering, and well ramming in layers not exceeding 25 cm thick. |
| 5 | M&L for hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread, and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4, Type B-2, using 40 mm graded stone aggregate in foundations, filling, and mass concrete, complete all as specified and directed. |
| 7 | M&L for providing precast cement concrete block masonry with solid blocks exceeding 10 cm width, Type C-1 (1:3:6) using 20 mm graded aggregate and set in cement mortar (1:6), all as specified and directed. |
| 8 | M&L for rendering 15 mm thick in cm (1:4) on fair faces of concrete surfaces and finished even and smooth without using extra cement including necessary scaffolding and safety measures as required all as specified and directed. |
| 9 | M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 10 | M&L for machine-pressed precast concrete interlocking coloured paver blocks of any size and shape conforming to IS 15658:2006, 80 mm thickness, M-40 grade with grey cement and pigment, complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4, Type B-1, using 20 mm graded aggregate as in kerbing all around tiles, complete all as specified and directed. |
| 12 | M&L for reinforced concrete pipes 200 mm dia, Class NP3, laid in trenches and jointed with collars, complete all as specified and directed. |
| 13 | M&L for cement concrete 1:3:6, Type C-2, to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested, for 150 mm internal dia pipes. |
| 14 | M&L for conventional LLDPE septic tank for 10 users, designed to carry sewage and sullage water, including excavation in all types of soil, PCC 1:4:8 below foundation, vent shafts, connections, etc., complete all as specified and directed by the Engineer-in-Charge. |
| 15 | S&F 110 mm bore PVC (SWR) pipes, single socketed, ISI marked conforming to IS 13592, Type ‘B’, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified. |
| 16 | S&F PVC (SWR) bend 110 mm bore with access door, complete all as specified. |
| 17 | S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified. |
| 18 | S&F for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe 290 Grade E-165, complete all as specified and directed. |
| 19 | M&L for applying two coats of synthetic enamel paint using mechanical spray (maximum working pressure over 3300 PSI) over a coat of red oxide zinc chromate primer, including preparation of new steel surfaces of any description exceeding 10 cm in width or girth, complete all as specified and directed. |
| 20 | M&L for precast reinforced cement concrete 1:2:4, Type B-1, using 20 mm graded stone aggregate for cover slabs and the like, including necessary formwork for fair faces of concrete, set in cement mortar 1:4, complete all as specified and directed. Note: Reinforcement shall be measured and paid separately. |
| 21 | M&L for mild steel deformed or twisted bars (TMT), 10 mm dia and over, cut to length, bent to required shape, including hooking ends and binding with annealed mild steel wire not less than 0.90 mm dia, complete all as specified. |
| 22 | Excavation in post holes (or similar holes) in hard/dense soil, each not exceeding 0.40 cum, including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 23 | M&L for plain cement concrete 1:3:6, Type C2 (40 mm graded aggregate), in foundations, filling and mass concrete, complete all as specified and directed. |
| 24 | S&F mild steel angle iron, flat iron, handrails, half-round or other steel sections or posts and struts in fencing, drilled and countersunk for balusters, running bars and nosing to steps, including embedding in concrete and screwing, etc.; flat iron to angle iron posts including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh, etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-O or Fe 310-O, complete all as specified and directed. |
| 25 | Supply only chain link fencing of 4 mm dia galvanised steel wire, 100 × 100 mm mesh, made up into mattresses or cages, lapped, wired and laid/fixed in position, complete all as specified and directed. |
| 26 | Fixing only chain link fencing of 4 mm dia galvanised steel wire, 100 × 100 mm mesh, made up into mattresses or cages, lapped, wired and laid/fixed in position, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed. |
| 27 | S&F mild steel round bars, 10 mm dia and over, for securing chain link fencing, cut to length and bent to required shape, including bolting, etc., complete conforming to Fe-290 Grade E-165, all as specified and directed. |
| 28 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed at the other, or screwed at both ends, each screwed end fitted with washers and one hexagonal or square nut, not exceeding 12 cm long and 11–15 mm dia of neck, complete all as specified and directed. |
| 29 | Surface excavation n. exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil. |
| 30 | M&L for PCC, Type D2, 1:4:8 (40 mm graded aggregate) in foundation filling and mass concrete, complete all as specified and directed. |
| 31 | M&L for stone dust or sand base filling in floors or paving's, laid in layers not exceeding 15 cm thick, spread, levelled and blinded with earth and rammed, including watering, complete all as specified and directed. |
| 32 | Supply and laying or fixing or passing through pipe or in cable ducts, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of 3.5 core 185 Sqmm size Note: Earth work, excavation, GI tubing/DWC pipe for protection etc shall be measured separately under relevant items of this schedule work. |
| 33 | Excavation in trench not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and for laying of LT under ground cables/GI pipes getting out as in soft /loose soil complete all as specified and directed. |
| 34 | S&F DWC high density polyethylene pipes having 100/95 mm dia with all fittings/coupler/connecting accessories confirming to IS : 16098 Part-02 for cable protection fixed on poles/walls/laid under roads crossing etc and made good the disturbed surfaces/area complete all as specified and directed. |
| 35 | Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6, type C1 matching with the surroundings all as directed. |
| 36 | Supply, install, testing and commissioning of LT feeder panel board of suitable size, out door type double door, dust and vermin proof made out of 3.15 mm thick MS sheet mounting on MS angle iron 50x50x6 MM size , height of legs not less than 750 mm height, suitable foundation of 150 mm thick PCC (1:3:6) type C 2 with 100 mm offsets and panel board with front and back opening and locking arrangement compete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including oriental bus bar of aluminium strip 600 amps for three phase 4 wire including the following accessories and fitted in : - (a) Incoming: (i) MCCB high breaking capacity 4 pole 415 volt 25 KA breaking cap adjustable thermal release range 250 amp of – 01 No (ii) Digital type Volt meter & amps meter with suitable capacity of CTs,LED indicator lamp and other connecting accessories. (b) Outgoing: (i) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 100 amp of – 1 No (ii) MCCB AC high breaking capacity 3 pole 415 volt 16 KA breaking cap adjustable thermal release range 63 amp of – 3 Nos (iii) MCB SPN 40 Amps 4 Nos all as directed by the Engr In Charge. |
| 37 | M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm and 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the Galvanised iron earth strip 32mmx6mm size, by means of bolts, nuts, check buts and washers of galvanised iron and 32mmx6mm earth lead protected by provision of GI medium grade pipe 40mm bore including provision 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering of suitable length placed on top edge of earth plate, common salt and charcoal filling, 15 CM alternate layer of charcoal and salt around all sides of earth plate with fixing arrangements, funnel, wire mesh and earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre complete all as per plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender