Tender For Special Repair/Replacement Of Street Lights, Security Lights, Rusted Steel Tubular And Vintage Plain Cement Concrete Poles And Connected Items At Various Locations At Dinjan Mil Stn
Tender Value
1.11 Crore
Estimated cost
Bid Submission
17 Aug 2026
18 days left
EMD
1.86 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Street Lights, Security Lights, Rusted Steel Tubular And Vintage Plain Cement Concrete Poles And Connected Items At Various Locations At Dinjan Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling /uprooting of LT unserviceable pre-stressed concrete /steel poles of any size and shape and including taking out dismantled portion of poles embedded in ground after necessary demolition of concrete foundation and making good disturbed ground surface properly and disposal thereof complete all as specified and as directed.Note:- Earth work for taking out poles shall be measured and paid separately under relevant item of this Schedule. |
| 2 | M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including two coats of aluminium paint over a coat of primer except the planting depth which shall be painted with black bituminous paint including writing pole number using suitable paint complete all as specified and as directed. Note : excavation and earth work, PCC filling shall be measured and paid separately. |
| 3 | M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 4 | M&L for cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pole foundation, filling and mass concrete complete all as specified and as directed. |
| 5 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of pole including necessary form work for fair finish surfaces complete all as specified and as directed |
| 6 | Supply & Fixing of 60W All in One Hybrid Solar Street Light, 50,000 LED burning hours, Panel 90 Wp Monocrystalline, AC input Voltage 140V-280V, System efficacy >150 LPW, MPPT,Intelligent Fix Dimmig/PIR Motion Dimming , 42 Ah LiFePO4 12.8V DC Battery,CCT 5700 ANSI, CRI > 70, over charge, deep discharge, reverse polarity and over temperature protection, 24 hours autonomy, 4kV Internal with Driver +10KV SPD, Driver Efficiency > 85%, O/P Short Circuit Protection, O/P Open Circuit protection, OVP > 320 V AC, Housing Aluminium extruded body, externally accessible CCU and battery, IP65, Suitable for Pole top OD 70-80mm, Mounting Pole top, side/center mounting, Certification LM79 (NABL), TTR, BIS for Solar Panel, BIS for Battery, LM80, manual cut off facility, including clamp, fitting and connection on existing pole as per site requirement complete all incl dismantling old U/S street lights as specified and directed. |
| 7 | Supply and fixing LED street light fitting 60Watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant with system lumen efficiency not less then 130lm/w, lumen output less than 7800 lumens, CCT 5700 K, CRI ≥ 70, IP 66 protection, IK 08 impact resitance, isolated constant current driver with PF ≥ 0.95, and THD upto10%, operating on 140-270 V AC, 50 Hz supply, Lens bean angle T2 with inbuilt surge protection of 6 KV internal & SPD upto 10 KV, LED life expentancy upto 50000 burning hrs, product warranty of 05 yrs all as specified. |
| 8 | Supply & installation in repair testing and commissioning of symmetric type Galvanized steel high mast lighting system of 12 meter in length in two section, 3 mm & 4 mm section thickness, top dia 150 mm, bottom dia 360 mm, with AISI 3161 steel wire rope 7/19, 6 mm dia system 2 for wich and 3 for lantern carriage, including of timer pannel , complete all as specified and as directed including following :-(a) Sustain upto wind speed of 180 Kmph(b) Non Flame Proof integral Motor.(c) Movable lantern carriage.(d) Double drum Winch.(e) 6 mm 316 Grade S S Hoisting Ropes of 7/19 construction.(f) Trailing Cable –1 per mast (5 Core 2.5 Sq mm)(g) Lightning Finial , Anchor Plate & Template(h) Accessories like Plug and Socket, GI Nut bolt with double washer,wiring cable for fixture, flexible conduit, copper lug, PVC tape, Cable tie etc(j) Foundation Bolt & Nuts T & P for fixing with its allied accessories as per OEM. System is suitable for loading 08 nos 350 w LED lights(k) Installation, Testing & Commissioning, Casting of foundation for High Mast & Panel @10T/sqm soil bearing as per OEM.(l) Earthing for High Mast 02 nos each and Timer panel, Power Supply up to the Panel & Cable laying, Providing Power Cable from High Mast to Panel.(j) LED Aviation light 01 nos each (k) LED Flood light 250 watt 08 nos each |
| 9 | M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed. |
| 10 | S&F in repairs street light bracket arm of length not less than 1.5 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed. |
| 11 | S & F lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 4 core complete all as specified and directed. |
| 12 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. |
| 13 | Excavating in trenches n.exc 1.5 mtrs wide and n.exc 1.5 mtr in depth for taking out for laying of cables, poles etc and getting out in soft/loose soil complete all as specified and directed. |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft/loose soil complete all as specified and as directed. |
| 15 | Removing excavated materials n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point in soil, complete all as specified and as directed. |
| 16 | Supplying and laying reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed. |
| 17 | M&L for sand cushioning for protection of cable (below, above and around the cable laid in trenches) all as specified and as directed. |
| 18 | S&F lay cable PVC insulated industrial flexible 1100 volt grade with stranded copper conductor of size 1.5 sqmm 3 core including 20mm conduit complete all as specified aand directed |
| 19 | M&L for earthing complete with GI earth plate electrode of size 600x600x3.15 mm thick buried directly in ground with earth pit not less than 2.25 m deep below ground level wiyh top edge of plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4.0 mm dia by means of nut , washers,bolts,check nuts of galvanised iron as steel ,protected by galvanised iron pipe 15 mm bore (medium grade)all as directed including cement concrete (1:3:6) type C1 earth pit with precast RCC (1:1:5:3) typeA-1Mcover slab of size 42x42x10 cm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both awys with 10 mm dia mild steel round bar of 30 cm long,bent to shape as lifting handle ,funel,wire mesh ,20 mm bore galvanised iron pipe (medium grade) for watering ,charcoal or coke and salt in alternate layers with necessry earth work in soft/loose soil complete all as shown in electrical plate No-03 of SSR Part-1 including testing on complition all as specified and directed |
| 20 | S&F in repairs 32 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, pole using suitable clamp/holder bat complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 21 | S&F in repairs 32 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, pole using suitable clamp/holder bat complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender