Tender For Addition/ Alteration And Replcaement Of All Glass Window With Upvc Sliding Windows Of Ldgs Buildings (P-29 & P-42)
Tender Value
38.70 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
19 days left
EMD
77400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Replcaement Of All Glass Window With Upvc Sliding Windows Of Ldgs Buildings (P-29 & P-42)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4.0 sqm each, with shutters (without taking off shutters from the frames), including making good the disturbed portions to match the adjoining surfaces, complete all as specified and as directed. |
| 2 | All as per Item No. 1 above, but not exceeding 1.5 sqm each, complete all as specified and as directed. |
| 3 | Providing and fixing factory-made uPVC white colour sliding window, 2.5 / three-track, area exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3 mm (±0.2 mm). Window profile with hollow multi-chamber sections. Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (one vertical length in each shutter) (45.5 mm x 28 mm), glazing bead (24.5 mm x 16 mm), mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water, etc., and making arrangements for fixing of hardware. EPDM gasket, 1.2 mm (±0.2 mm) thick galvanised steel reinforcement: frame (30 mm x 18 mm) – 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required sections. Frame fixed to wall with 8 mm x 100 mm long fasteners. Hardware comprising touch lock of zinc alloy (white powder coated), steel roller system, stainless steel wire cloth of 0.36 mm nominal dia of wire and average aperture width of 1.40 mm, and all other required accessories, complete all as specified and as directed.(Note: The unit rate quoted by the contractor excludes cost of glass but includes all other connected accessories. Net opening shall be measured for payment.) |
| 4 | Providing and fixing factory-made uPVC white colour sliding window, 2.5 / three-track, area not exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3 mm (±0.2 mm). Window profile with hollow multi-chamber sections. Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (one vertical length in each shutter) (45.5 mm x 28 mm), glazing bead (24.5 mm x 16 mm), mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water, etc., and making arrangements for fixing of hardware. EPDM gasket, 1.2 mm (±0.2 mm) thick galvanised steel reinforcement: frame (30 mm x 18 mm) – 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required sections. Frame fixed to wall with 8 mm x 100 mm long fasteners. Hardware comprising touch lock of zinc alloy (white powder coated), steel roller system, stainless steel wire cloth of 0.36 mm nominal dia of wire and average aperture width of 1.40 mm, and all other required accessories, complete all as specified and as directed.(Note: The unit rate quoted by the contractor excludes cost of glass but includes all other connected accessories. Net opening shall be measured for payment.) |
| 5 | S&F 4.0 mm thick sheet glass, ordinary quality, and glazing with oil putty in squares not exceeding 0.5 sqm in each pane, fixed to uPVC windows/ventilators, complete all as specified and as directed. |
| 6 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard sections, fixed to existing frame with CP brass/stainless steel screws at 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles, and fixing approved anodised aluminium standard sections around the opening, complete all as specified and as directed. |
| 7 | M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement, including necessary scaffolding and safety measures, complete all as specified and as directed. |
| 8 | M&L for preparation of new plastered surfaces, including applying a coat of 3 mm thick wall care putty, followed by one coat of alkaline resistant primer and two coats of acrylic washable distemper using mechanical spray (maximum working pressure of 3300 PSI), including necessary scaffolding and safety measures, complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender