Tender For Welcome Maintenance Of Jco And Ors Md Accn At Aec Trg College & Centre Pachmarhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Of Jco And Ors Md Accn At Aec Trg College & Centre Pachmarhi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 2 | M & L for preparation of the old surfaces of walls including complete removal of the existing treatment and applying two coats of cement base paint all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for preparing old plastered surfaces of walls/ceiling and applying two coats of exterior emulsion paint over a coat of primer including removal of existing treatment on wall/ ceiling surfaces including cornices, plasters etc by scrapping down with wire brushes and removing existing loose finishes, particles etc, all as specified and directed by Engineer-in-Charge. |
| 4 | M & L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge. |
| 5 | M & L for preparation of old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge. |
| 6 | M & L for preparation of the old surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge. |
| 7 | M & L for preparation of the old surfaces of walls and applying two coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge. |
| 8 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 9 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 11 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | Demolition of brickwork built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed by Engineer-in-Charge. |
| 13 | Material & labour old size brick work with sub class 'B' bricks in CM 1:6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L for rendering 12mm thick in CM (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material and Labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 16 | M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply only integral water proofing compound of approved brand/make all as specified and directed by Engineer-in-Charge. |
| 18 | M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed by Engineer-in-Charge. |
| 19 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge. |
| 20 | M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 21 | Taking down Chowkhats or frames exc 1.5 sqm but not exc. 4 sq. m each with shutters (without taking off shutters from the frames) |
| 22 | Taking down door chowkats or frames with shutter (without taking out shutter from frame ) area not exc 1.50 m . |
| 23 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing and directed by Engineer-in-Charge. |
| 24 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and directed by Engineer-in-Charge. |
| 25 | S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm all as specified and directed by Engineer-in-Charge. |
| 26 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and directed by Engineer-in-Charge. |
| 27 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engineer-in-Charge. |
| 28 | Hacking out old glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and Fix plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge. |
| 30 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc all as specified and directed by Engineer-in-Charge. |
| 31 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed by Engineer-in-Charge. |
| 32 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store all as specified and directed by Engineer-in-Charge. |
| 36 | S&F 500 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender