Tender For Addn/ Altn And Improvement To Office Space At Hqtc Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
77670
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn And Improvement To Office Space At Hqtc Banglaore
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK: ADDN/ ALTN AND IMPROVEMENT TO OFFICE SPACE AT HQTC BANGLAORE CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 3 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 4 | Supply and fix factory made uPVC white /colour casement (openable) door made of extruded profile wilh wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, frame (60x58mm), sash (60x78mm). T profile (one vertical length in between two shutters) (60x74mm). Glazing bead (35x20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +/- 0.2mm thick galvanized steel frame (28x21.5mm), sash (31x27mm), T profile (27x17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8x100mm long fasteners. Hardware: casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed white powder coated and 5mm thick glazing with selected quality glass complete all as specified and as directed by Engr-in-charge.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 5 | Supply and fix factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multichamber, frame (108x48mm), sliding sash (38x61mm). Sliding mesh sash (38x61mm) sliding interlock (one vertical length in each shutters) (45x34mm), glazing bead (19x16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +/- 0.2mm thick galvanised steel frame (30x18mm) 2 Nos, sliding sash (30x18mm), sliding mesh sash (26x10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8x100mm long fasteners, hardware touch lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 5mm thick glazing with selected quality glass and as required accessories complete all as specified and as directed by Engr-in-charge.Notes: (i) The unit rate quoted by contractor includes cost of glass, mesh and includes all other connected accessories. Net Opening will be measured for payment purpose.(ii) uPVC frame and sash extruded profiles minus 5% tolerance in dimension in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account made.(iii) The rate quoted shall be inclusive of scaffolding and other safety measures. |
| 6 | Material and labour for fixing partly glazed partition of height from floor with 9mm thick interior grade phenol formaldehyde bonded as per IS3087 melamine faced both sides prelaminated particle board/ MDF board of approved shade and manufacturer and glazed portion and middle portion with 4mm thick tinted glass in aluminium frame work consisting of rectangular section of size approx 62.5x37.10x2mm, glazing clip etc., rate to allow for anodizing the aluminium sections in natural plain colour complete all as specified and as directed by Engr-in-charge.Notes: (i) Aluminium partition shall be fixed at site in different stages as per the following: (a) From bottom upto 1.2m height 9mm thick interior grade phenol formaldehyde bonded as per IS3087 melamine faced both sides prelaminated particle board/ MDF board will be fixed.(b) From top of board upto 1m height 4mm thick ordinary glass will be provide. |
| 7 | Supply and fix 12mm toughened glass as glass partitions and fixed with uPVC frame similar work etc., including cutting to shape, drilling holes required complete all as specified and as directed by Engr-in-charge. |
| 8 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including beads complete all as specified and as directed by Engr-in-charge. |
| 9 | Supply and fix 4.8mm thick sheet glass ordinary glass and glazing fixed with uPVC frame at door and window in squares exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply and fix 4.8mm thick sheet glass frosted glass and glazing fixed with wooden moulding at door and window in squares exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for Gl frame size of grid 605x605mm for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for seamless calcium silicate ceiling made out of 1800x1200x12mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish complete all as specified and as directed by Engr-in-charge.Note: Frame work for ceiling shall be measured and paid separately. |
| 13 | Material and labour for preparation of new surface of false ceiling by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified and as directed by Engr-in-charge. |
| 14 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for 40mm thick teakwood door design framed, heritage and vintage designs panelled shutters (any number of panels) and fitted to chowkats complete all as specified and as directed by Engr-in-charge. |
| 16 | Supply and fix 150mm long SS handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 17 | Supply and fix 300mm long SS handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 18 | Supply and fix 200mm long SS tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and fix aluminium extruded section body door closer hydraulicaly regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply and fix 100mm SS butt hinges, medium weight complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix 125mm long SS door stoper, medium weight complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix 150mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 23 | Material and labour for treatment of soil under existing floors using emulsion @ 1 ltrs per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 sand) to match the existing floors complete all as specified and as directed by Engr-in-charge. |
| 24 | Material and labour for along the external /internal wall below concrete or masonry apron using chemecal emulsion @ 2.25 ltrs per liners metre incl drilling and plugging holes etc in apron |
| 25 | Supply and fix 18/ 19mm thick veneered decorative plywood, grade 1 (with BWR resin), with decorative face veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves, almirahs etc., complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply and fix brass Godrej mortice lock, vertical type, size 100mm 4 levers include for escutcheon plates and two keys complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply and fix 100mm long mortice latch with two levers (vertical type), brass body and fixed complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix stainless steel clip on auto closing panel concealed hinges thickness 15-22mm for full overlay door 0 degree crank for cupboard door complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply and fix 100mm long SS handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply and fix magnetic catch complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix sheet glass shelf assembly consisting of 5 to 6mm thick glass 12 to 15cm wide with brass CP bracket guard and railing 45 to 60cm long complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix for Horizontal Venetian Blinds all as specified and directed by engineer in charge.TECHNICAL SPECIFICATIONS:1) Fabric:a) Composition - 100% Polyester.b) Weight approx. 190 g/m2 (±5%).c) Thickness - 0.41 mm (±0.05)d) Hanging Properties-Excellente) Tearing Strength-Very Highf) Visibility- Translucentg) Operating system - Manual Ball chain.2) Top Tube:Blinds Top Tube extruded by none rusting Aluminium alloy with 1.25 mm thickness. The Channel is designed with support beam to keep it straight and shall have a pocket for holding the fabrics in position. As per windows dimensions, top tube should be in the range of 38 to 45 mm diameter.3) Control Unit: Control unit mechanism made by high strength ABS plastic. The mechanism shall be operating with the use of a ball chain. As per requirement there is an option of left or right control. |
| 33 | 4) Brackets:Universal mounting brackets must be capable of mounting inside/ outside/ ceiling/ wall with the clutch on either the right or left end of the tube. The Brackets are made of Mild Steel and are powder coated for a greater finish. Brackets shall be accommodating overhead or side mounting with clutchassembly on either end of the blind.5) Ball Chain: Ball chain is made of unbreakable polyethylene plastic, 1.50mm Polyester cord with 4.50 mm balls. The blind can be stopped at any desired position with the help of a stop lock. Chain jointer is used to secure the chain.6) Bottom Rail: Bottom Channel of Blind is available in Half Round shape made of none rusting Aluminium powder coated with 1.50mm thickness. The fabric shall be enclosed in the suitably created pocket along with tube. The channel shall be closed from sides with the end caps to give a neat look. |
| 34 | Supply and fix for 12mm toughned glass with suitable SS clamps, SS holder, SS fastener and hinged doors, partitions doors and fixed with wooden frame, aluminum frame similar and SS frame 304 G work including cutting to shape, drilling holes required complete all as specified and as directed by Engr-in-charge. |
| 35 | Supply and fix SS handle 12\\" long and 20mm dia glass door handle C type complete all as specified and as directed by Engr-in-charge. |
| 36 | Supply and fix SS 12mm thick toughened glass double center door lock complete all as specified and as directed by Engr-in-charge. |
| 37 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 38 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 39 | Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 40 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 41 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separately. |
| 42 | Material and labour for new surface of wall by applying 1mm thick wall care putty and making the surface smooth finishing walls and applying acrylic smooth exterior paint of required shade (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified and as directed by Engr-in-charge. |
| 43 | Supply only liquid water proofing compound complete all as specified and as directed by Engr-in-charge. |
| 44 | Material and labour for preparation of external unplastered stone wall surface washing, rubbing down, dust cleaning and applying two coats of acrylic exterior paint over and including one coat of primer with alkali-resistance priming paint by mechanical means complete all as specified and as directed by Engr-in-charge. |
| 45 | Material and labour for complete removal of existing treatment plastered old surface of wall and preparation of surface by applying 1mm thick wall care putty and making the surface smooth finishing walls and applying acrylic smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified and as directed by Engr-in-charge. |
| 46 | Material and labour for complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 47 | Dismantling structural steel work including doors, gates, steei window and similar works but excluding framed truss etc., complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 49 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide priming complete all as specified and as directed by Engr-in-charge. |
| 50 | Material and labour for plain cement concrete Type B0, 1:2:4 (Using 12.5mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast, bed plates, filling hollow section of pressed steel frame and the like including use and waste of form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge. |
| 51 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 52 | Material and labour for 25mm thick PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and as directed by Engr-in-charge. |
| 53 | Material and labour for coloured vitrified tiles 8 to 10mm thick (square/ rectangular) area of each tile size 600x600mm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 54 | Material and labour for coloured vitrified tiles 8 to 10mm thick (square/ rectangular) area of each tile size 600x600mm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified and as directed by Engr-in-charge. |
| 55 | Material and labour for coloured vitrified tiles 8 to 10mm thick (square/ rectangular) area of each tile size 1200x600mm in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 56 | Material and labour for coloured vitrified tiles 8 to 10mm thick (square/ rectangular) area of each tile size 1200x600mm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified and as directed by Engr-in-charge. |
| 57 | Taking up or down steel tubing and connection 15mm bore pipe and removing from site complete all as specified and as directed by Engr-in-charge. |
| 58 | Supply and fix for 15mm dia bore medium grade GI tubing and including all fitting ie elbow, Tee, union, tank nipple, coupling, etc., fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed by Engr-in-charge. |
| 59 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix for 15mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge. |
| 61 | Supply and fix for fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 62 | Supply and fix for angle valve 15mm bore brass chromium plated with capstan head screwed for iron pipe complete all as specified and as directed by Engr-in-charge. |
| 63 | Supply and fix for PVC connection 15mm size 450mm long with CP PTMT nuts complete all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fix for 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boards on commercial plywood including provn for hanging clips complete all as specified and as directed by Engr-in-charge. |
| 65 | Supply and fix for brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with and including chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed by Engr-in-charge. |
| 66 | Supply and fix for vitreous china wash basin, size 550x400mm white including brackets, and waste coupling and pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins white or tinted, etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fix for standard PVC waste pipe 32mm dia for WHB complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fix for 32mm dia waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge. |
| 69 | Supply and fix for 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed by Engr-in-charge. |
| 70 | Material and labour for granite (of any type) tiles 18-20mm thick (table rubbed and polished) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in flooring and landings of staircase, treads including cutting and polishing of tiles and 20mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 71 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge. |
| 72 | Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and as directed by Engr-in-charge. |
| 73 | Demolition of reinforced cement concrete of any description and any poisition not otherwise specifically provided (reinforcement cut to faciliatate demolition) complete all as specified and as directed by Engr-in-charge. |
| 74 | Material and labour for precast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggegrate) as in chullah hood chajja and manhole cover, kitchen shelves etc., set in cement mortar 1:4 including all neccesary formwork and finishing exposed concrete surface complete all as specified and as directed by Engr-in-charge. |
| 75 | Supply and fix for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and as directed by Engr-in-charge. |
| 76 | All as per item No.73 here-in-before but 6 to 8mm dia complete all as specified and as directed by Engr-in-charge. |
| 77 | Material and labour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge. |
| 78 | Supply and fix for 110mm dia PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply and fix 110mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge. |
| 80 | Supply and fix 18 /19mm thick WPC wooden finish surface board as in wall paneling including necessary frame work etc., complete all as specified and as directed by Engr-in-charge. |
| 81 | Material and labour for concealed point wiring with 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., round/ square PVC blocks at junction for batten holders, ceiling rose etc., screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls /brick masonary walls or any type wall /ceilings /floors etc., including anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6mm with earth dolly for mounting of modular switches/ sockets/ regulator etc., and 1.5 sqmm PVC insulated, unsheathed FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge for the following:Note: Cutting, chasing, drilling in any type of wall for fixing of concealed conduit and modular sunken boxes shall be included in quoted rate. No extra payment will be made for this. |
| 82 | One light point controlled by one single pole 5 Amps switch. |
| 83 | One ceiling fan point controlled by one single pole 5 Amps switch. |
| 84 | One exhaust fan point controlled by one single pole 5 Amps switch. |
| 85 | One 5 pin socket point 5 Amps on independent board. |
| 86 | One 5 pin socket point 5 Amps on same board with other switches. |
| 87 | One bell/ buzzer point controlled by one push button 5 Amps switch on independent board. |
| 88 | Four light controlled by one single pole 5 Amps switch. |
| 89 | Six light point controlled by one single pole 5 Amps switch. |
| 90 | All as per item No.79 here-in-before but for power point wiring with 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified and as directed by Engr-in-charge. |
| 91 | Supply and fix modular switch, 1 Module single pole one way, 10 Amps complete all as specified and as directed by Engr-in-charge. |
| 92 | Supply and fix modular socket, 2 Module, 6 Amps, 5 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 93 | Supply and fix modular switch, 1 Module single pole one way 16 Amps complete all as specified and as directed by Engr-in-charge. |
| 94 | Supply and fix modular socket, 2 Module, 6/16 Amps, 6 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 95 | Supply and fix modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 /1400mm complete all as specified and as directed by Engr-in-charge. |
| 96 | Supply and fix modular type bell push flush type one way 6 Amps 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 97 | Supply and fix call bell ding dong type 230 Volt single pole complete all as specified and as directed by Engr-in-charge. |
| 98 | Supply and fix PVC ceiling rose 65x50mm surface type with 3 terminals 230 volt complete all as specified and as directed by Engr-in-charge. |
| 99 | Supply and fix modular white cover plate with frame, 2 module complete all as specified and as directed by Engr-in-charge. |
| 100 | Supply and fix modular white cover plate with frame, 3 module complete all as specified and as directed by Engr-in-charge. |
| 101 | Supply and fix modular white cover plate with frame, 4module complete all as specified and as directed by Engr-in-charge. |
| 102 | Supply and fix modular white cover plate with frame, 6 module complete all as specified and as directed by Engr-in-charge. |
| 103 | Supply and fix modular white cover plate with frame, 8 module complete all as specified and as directed by Engr-in-charge. |
| 104 | Supply and fix modular metal flush box 1/2 module complete all as specified and as directed by Engr-in-charge. |
| 105 | Supply and fix modular metal flush box 3 module complete all as specified and as directed by Engr-in-charge. |
| 106 | Supply and fix modular metal flush box 4 module complete all as specified and as directed by Engr-in-charge. |
| 107 | Supply and fix modular metal flush box 6 module complete all as specified and as directed by Engr-in-charge. |
| 108 | Supply and fix modular metal flush box 8 module complete all as specified and as directed by Engr-in-charge. |
| 109 | Supply and fix LED light fitting, 4 feet 1x20 watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose to fitting complete all as specified and as directed by Engr-in-charge. |
| 110 | Supply and fix LED light fitting of size 600x600mm, 36 watts, white/warm white as per requirement 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose to fitting complete all as specified and as directed by Engr-in-charge. |
| 111 | Supply and fix LED light fitting round shape 15 watt white/ warm white as per requirement 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose to fitting complete all as specified and as directed by Engr-in-charge. |
| 112 | Supply and fix LED mirror light fitting 2 feet, 10 watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose to fitting complete all as specified and as directed by Engr-in-charge. |
| 113 | Supply and fix sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 114 | Supply and fix sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 115 | Supply and fix for MCB SP, 6-32 Amps, 230V, C-series with breaking capacity of 10KA complete all as specified and as directed by Engr-in-charge. |
| 116 | Supply and fix for MCB SPN, 40 Amps, 230 V, C-series with breaking capacity of 10 KA complete all as specified and as directed by Engr-in-charge. |
| 117 | Supply and fix for sheet metal enclosure for DB's double door VTPN 08 ways including 01 No MCCB 125 Amp 4 pole 16 KA to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V complete all as specified and as directed by Engr-in-charge. |
| 118 | Supply and fix for exhaust fan steel body AC single phase 230 V of size 380mm sweep, 900 RPM with blades, and frame and louvers including making holes in brick /stone wall of suitable size dia for fixing of exhaust fan and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge. |
| 119 | Supply and fix for BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and remote to control all the function of fan complete all as specified and as directed by Engr-in-charge. |
| 120 | Material and labour for concealed sub main wiring with two single core 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti/ roul plugs PVC all as per site requirements including fixing inside stone walls /brick masonary walls /ceilings /floors etc., with 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster and matching with the existing colour of wall/floor etc., complete all as specified and as directed by Engr-in-charge.Notes: (i) Two run of single core 2.5 sqmm cable and one run 2.5 sqmm earth wire including PVC concealed conduit together will be measured as one unit.(ii) Cutting, chasing, drilling in any type of wall for fixing of concealed conduit for sub main wiring shall be included in quoted rate. No extra payment will be made for this. |
| 121 | Material and labour for concealed sub main wiring with two single core 4 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti/ roul plugs PVC all as per site requirements including fixing inside stone walls /brick masonary walls /ceilings /floors etc., with 4 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster and matching with the existing colour of wall/floor etc., complete all as specified and as directed by Engr-in-charge.Notes: (i) Two run of single core 4 sqmm cable and one run 4 sqmm earth wire including PVC concealed conduit together will be measured as one unit.(ii) Cutting, chasing, drilling in any type of wall for fixing of concealed conduit for sub main wiring shall be included in quoted rate. No extra payment will be made for this. |
| 122 | Material and labour for concealed sub main wiring with two single core 6 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti/ roul plugs PVC all as per site requirements including fixing inside stone walls /brick masonary walls /ceilings /floors etc., with 6 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster and matching with the existing colour of wall/floor etc., complete all as specified and as directed by Engr-in-charge.Notes: (i) Two run of single core 6 sqmm cable and one run 6 sqmm earth wire including PVC concealed conduit together will be measured as one unit.(ii) Cutting, chasing, drilling in any type of wall for fixing of concealed conduit for sub main wiring shall be included in quoted rate. No extra payment will be made for this. |
| 123 | Material and labour for earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4mm dia as earth lead up to test point with suitable size GI nuts /bolts, washers, check nut and brazed properly upto main board, LT panel etc., and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 (Using 20mm graded stone aggregates), 40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15mm bore up to main board complete all as shown in electrical plate No 3 of MES schedule Part-I, connected to earthing testing point and testing on completion complete all as specified and as directed by Engr-in-charge.Notes: (i) The unit rate shall include for 15mm dia GI pipe upto 7.5m for protection of earth lead.(ii) The unit rate shall include for galvanised iron wire 4mm dia from earth electrode to test point upto 7.5m.(iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the Govt till desired result is obtained.(iv) After completion of work earthing shall be tested by the contractor in presence of Engineer-in-Charge / JE E/M and proper record shall be maintained duly signed by all concerned.(v) Earth resistance tester will be provided by the contractor It should be caliberated from authorised company/ lab. |
| 124 | Supply and fix for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing 4mm dia galvanised iron or steel wire complete all as specified and as directed by Engr-in-charge. |
| 125 | Supply and fix for single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 Amps complete all as specified and as directed by Engr-in-charge. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender