Tender For Balance Work For Jack Pushing Of Railway Track Between Raghunathbari To Rajgoda Railway Station On Panskura-Tamluk Section Of Kharagpur S.E. Railway Division Of Purba Medinipur For Harasankar Khamarchak Water Supply Scheme Of 600 Mm Dia Ms
Tender Overview
Project Description
Tender for Balance Work For Jack Pushing Of Railway Track Between Raghunathbari To Rajgoda Railway Station On Panskura-Tamluk Section Of Kharagpur S.E. Railway Division Of Purba Medinipur For Harasankar Khamarchak Water Supply Scheme Of 600 Mm Dia Ms Casing Pipe And 150 Mm Dia Ms Pipe Carrier Pipe In Between Ohe Mast No 13/5 - 13/7 And 13/6 - 13/8 , Within Tamluk Sub-Division Under Tamluk Division, P.H.E Dte. (Total Length =75.00 Mtr ) Nodal Point 176 To 183
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches upto required depth, in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 1.50m as directed and inlcuding trimming the sides of trenches, levelling, dressing and ramming the bottom. |
| 2 | a) Depth of excavation not exceeding 1.50 mtr. |
| 3 | b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. |
| 4 | c) Depth of excavation for additional depth beyond 3000 mm. and upto 4000 mm excluding cost of shoring as necessary |
| 5 | Earth work in filling in foundation trenches or plinth with good earth, In layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on basis of measurement of finished quantity of work). A)With earth obtained from excavation of foundation. |
| 6 | Hiring charges of Mechinery & Equipments, viz Hydraulic Jack DG Set, Crane/Hydra, pump for dewatering JCD etc. as per requirement at site including cost of fuel tools & tackles. |
| 7 | Hiring & driving MS Sheet piles (Receiving Pit) ( Height = 0.20 +0.30+0.30+0.60+3.0+1.30) mtr = 5.70 mtr Area - 2x (6.60+3.60) mtr x 5.70 mtr = 116.28 sqm |
| 8 | A) Supply of E. R.W.M.S. (Electrical Resistance Welded M.S) black pipe of TATA make (heavy quality) as per standard specification, 5 mm thick |
| 9 | Welding in M.S. structural work with gas or electric Field welding of MS pipe (2 times x 50 nos x 3.142 x 15.6) mtr = 4901.0 |
| 10 | (b) Continuous weld |
| 11 | Mazdoor (Male) removal of soil etc. as per site requirement @5 nos labourer per day |
| 12 | Filling the pipeline with water, testing hydraulically asper I.S3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3, if contractor used water from deptt. source). |
| 13 | a) 150 mm dia |
| 14 | Cleaning thoroughly the inner surface of pipe line including specials and valves by flushing with water and subsequently disinfection of the same pipe line by flushing again with water containing bleaching powder resulting inresidual chlorinenot less than15mg/ltrs. after 24 hrs. of such filling including laboratory testing of water samples obtain from the disinfested pipe line and disposal of water from the pipe line after completion of the work. The rates including of cost of requisite water to be arranged by the contractor) (The rate of water @Rs. 10/m3 may be recovered, if the contractor used water from deptt. source). |
| 15 | a) 150 mm dia |
| 16 | Filling in foundation in layers bi silver sand in layers for packing of sand in gap between casing pipe & bore hole avoid settlement of road |
| 17 | Painting with ready mixed Black Japan of approved make and brand |
| 18 | (b) Two coats |
| 19 | Withdrawing & removing sheet piles |
| 20 | Removal of rubish , earth etc from the worksite and disposal of the same |
| 21 | Add GST @18% (CGST@9% + SGST@9%) |
| 22 | Add Cess@1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender