Tender For Development Of Eco-Tourism Park At Kaina Hilllock.
Tender Value
4.46 Crore
Estimated cost
Bid Submission
13 Aug 2026
15 days left
EMD
8.92 Lakhs
Bank guarantee accepted
Document Fee
30000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal East → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Development Of Eco-Tourism Park At Kaina Hilllock.
BOQ
| Sl. No. | Item Description |
| 1 | SH-A : Land Development. |
| 2 | Excavation for Structure(Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deletteriour matter,mndressing of sides and bottom, backfilling the excavtion earth to the extent rerquired and utilising the rermaining earth locally for road work ()i) Ordinary soil B Mechanical Means (Depth upto 3m) |
| 3 | Back filling behibnd abutment, wiring wall and return wall complete as per drawing abnd Terchnical specification A Granular material. |
| 4 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed placed in foundation and compacted by viobratiobn including curing for 14 days. |
| 5 | Plain cement concrete M-=15 mix withstone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto depth of 1.5m below ground/bed level and or 1.5m above ground /bed levelio/c formwork. |
| 6 | Reinforced cement concrete M-20 mix with stone aggregate 20mm. nominal size mechanically mixed and vibrated for bed plates & walls excluding steel but includiong centering and shuttering laid in position. |
| 7 | Reinforced cement concrete mix with stone aggregate 20mm nominal size mechanically mixed and vibrated for reinfored concrete work in slab excluding steel reinforcement, but including centering and shuttering laid in position.(ii)M-25. |
| 8 | Providing and laying cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. |
| 9 | Supplying, fitting and placing HYSD bar reiforcement in sub-structure complete as petr drawing and dtechnical specifications. |
| 10 | Providing weep holes in Brick masonary/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia pipe,extending through the full width of the structure with slope of IV:20H towards drawing force. Complete as per drawing and Technical specification. |
| 11 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. |
| 12 | Providing and laying factory made cement concrete interlocking paver block of M30 grade made by block making machine with strong vibratory compaction, of approval size, design & shape, laid in required colout and pattern over and including 50mm thick compacted bed of coarse sand filling the joints with line sand etc all complete as per the direction of Engineer-n-charge |
| 13 | 60mm thick |
| 14 | SH-B:: Construction of 15 nos. Huts at Kaina Hillock, Imphal East District |
| 15 | SH: EARTWORK |
| 16 | Earth work in excavation by mechanical means (Hydraulic Excavtor)? Manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m including gwetting out the excavated soil and disposal of surplas excavated soil as directed within a lead of 50m. |
| 17 | Filling available excavated earth(excluding rock) in trenches, plinth, sides of foundation etc. ion layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to l50 m and lift upto 1.5 m. |
| 18 | Supplying and filling in plinth with saqndy soil under floors including, watering, ramming conmsolidating and dressing complete. |
| 19 | SH: CEMENT CONCRETE WORK |
| 20 | Providing and laying in plain cement concrete of specified grade wxcluding the cost of centering and shuttering -- All work upto plinth level. |
| 21 | 1:5:10( 1 cement:5 coarse sand: 10 graded stone aggregate 40 mm nominal size) |
| 22 | 1:4:8n (1 Cement:4 corse sand: 8 graded stone aggregate 40 mm nominal size) |
| 23 | Providing and laying in position specified gare of reinforced cement concrete, excluding the cost of cenering, shuttering, finishing and reinforcement-All work up to plinth level: |
| 24 | 1:1.5:3 (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 25 | SH: REINFORCEMENT |
| 26 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete |
| 27 | Thermo-Mechanically Treated bars |
| 28 | SH: FRAM WORK |
| 29 | Centering and shuttering including strutting propping etc. and removal of form for: |
| 30 | Foundation , footing bases of cloumn etc. and mass concrete. |
| 31 | Walls (anythickness) including attached pilaters, buttresses, plinth and string course etc. |
| 32 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 33 | Suspended floors, roofs, landing, balconies and access platform. |
| 34 | SH: BRICK WORK |
| 35 | Brick work 1st class common burnt clay F.P.S (non modular) bricks in foundation and plinth in: |
| 36 | Cement morter 1:4 (1 cement : 4 coarse sand) |
| 37 | Half brick masonary with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 38 | Cement morter 1:3 )1cement : 3 coarse sand) |
| 39 | Half brick masonary with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 40 | Cement morter 1:3(1 cement : 3 coarse sand) |
| 41 | SH: FINISHING WORK |
| 42 | (A) CEMENT PLASTER IN COARSE SAND |
| 43 | 12 mm cement plaster of mix :1:4 (1 cement : 4 coarse sand) |
| 44 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat neat cement of mix: |
| 45 | 1:3(1 c,ment : 3 fine sand) |
| 46 | Providing and applying shite cement based putty of average thickness 1 mm. of approved brand and manufacturer, over the plastered wall surface to prpare the surface even and smooth complete. |
| 47 | Finishing walls with Acrylic Smooth ezxterior paint of rerquired shade:- New work (Two or more coats applied @ 1.43 ltr/10 sqm. Over and including base coat of water proffing cement paint applied @ 2.20 kg/10 sqm). |
| 48 | SH: WOOD WORK |
| 49 | Providing wood work in frames of doors, windows, clestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately |
| 50 | A) Local best quality teak wood. |
| 51 | Providing and lfixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. Local best quality Teak wood A) 35mm thick. |
| 52 | P/F Brass sliding bolts bright finished or black enamelled with nuts and srews etc. |
| 53 | (a) 300x16 |
| 54 | P/F ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc. complete. |
| 55 | (a) 250x10 mm |
| 56 | P/F bright finished brass handles with screws etc. |
| 57 | (a) 125 mm |
| 58 | Providing & fixing Artificial Bamboo including fixture and all lcomplete |
| 59 | Providing fixing UPVC opening with glass including fixture and all complete |
| 60 | 25 mm thick plank walling (Tolhao local best quality) and Tolhao wood deading 62mm x12 mm i/c fitting and fixing with necessary screws andnails complete (framwe work to be paid separately). |
| 61 | SH: FLOORING WORK |
| 62 | 25mm wooden planking, tongued and grooved in flooring including fixing with iron screwss complete with : 1sr class teak wood. |
| 63 | Polishing on wood work with ready made wax polish of approved brand and manufacture: |
| 64 | New work |
| 65 | SH: STEEL WORK: |
| 66 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel prinmer, including welding and bolted including special shaped washers etc. complete. |
| 67 | Hot finished welded type tubes |
| 68 | SH: ROOFING WORK |
| 69 | Providing & fixing Artificial Thatch including fixture and all lcomplete |
| 70 | Furnitural Goods |
| 71 | Internal Electrical Installation |
| 72 | Writing for light /Fan point/Exhaust Fan print/call bell point with 1.5 mm 2PVC insulated copper single core cable in PVC insulated casing copper with piano type switch phenolic laminated sheet suitable size MS box and earthing the poiny with 1.5 mm PVC insulated copper conductor single cable etc. as reqd. |
| 73 | 1. Group -A |
| 74 | 2. Group -B |
| 75 | 3. Group -C |
| 76 | Writing for light /power plug with 2 x 4 mm 2 PVC insulated copper conductor single core cable in PVC casing and cpping with 1 no. 4mm 2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd. |
| 77 | Writing for circuit/sub-main writing along withearth wire with (the following sizes of ) PVC insulated copper conductor single core cable in PVC casing and capping etc. as reqd. |
| 78 | 2 x 2.5mm 2+1x1.5 mm 2 earth wire |
| 79 | 2 x 2.5 mm + 2.5 mm2 earthwire |
| 80 | 2 x 4 mm2 1 x 4mm2 earth wire |
| 81 | S/F ( following piano type swith/ socket) on existing switch box/ coveri/c connection etc. as reqd. |
| 82 | 5/6 amps switch |
| 83 | 5/16 amps switch |
| 84 | 3 pin 15/16 amps socket outlet |
| 85 | 6 pin 15/16 amps socket outlet |
| 86 | S/F brass batery/angle bolder i/c connecton etc. as reqd. |
| 87 | S/F 48\\" sweep (1200m) A.C. ceiting fan complete with down rod, canopy, 3(three) blades but without regular etc. as reqd. (Make Bajaj/ Usha or similar) |
| 88 | Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/e connection but excluding modular plate etc. as reqd. |
| 89 | S/F 450mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd. |
| 90 | S/F 20 W CFL Lamp |
| 91 | S/F 15 WCFL Lamp |
| 92 | S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board, 240 V on surface/recessed complete with tinned copper but bas neutral bus bar, earth bar, din bar, detachable gland plate interconnection, phosphatized and powder pained inluding earthing etc. as req. (but without MCB/RCCB/isolator |
| 93 | 4 Way single door |
| 94 | Supplying and fixing 5 amp to 32 amp rating 230 v series MCB for lighting and other load for following poles) in the existing MCB DB complete with connection testing and commissioning etc. as reqd |
| 95 | Single pole and neutral |
| 96 | S/F (following rating) double pole 240 V isolator in the existing MCBDB complete with connection testing and commissioning as reqd. |
| 97 | 40 amp. |
| 98 | 10 sq.mm ISI marked, FR PVC insulated single core copper conductor cable. |
| 99 | S/F of metal Boxes with phenolic laminated sheet cover in front |
| 100 | 250 mm x 300mm x 100 mm deep |
| 101 | S/F bell buzzer/Ding Dong bell ( Ding Dong Electronic and bell push including connection etc as reqd. |
| 102 | Earthing with G.I earth pipe 4.5 m long 40 mm dia i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd. |
| 103 | Extra for using salt and charcoal for pipe earth electrode as reqd. |
| 104 | P/L earth connection from earth electrode with 4 mm dia copper wire in 15mm dia G.I. pipe as reqd, |
| 105 | 60 amp/63 amp 500 V T.P.I.C switch (Kitkat) |
| 106 | Fire extinguisher |
| 107 | Internal WaterSupply and Sanitary Installation |
| 108 | Providing and fixing chlorinated polyvinyle chloride (PVC) pipes, having thermall stability for hot & cold watr supply including all CPVC plain & Brass threaded fitting. This includes joining of pipes & fittings with one step CPVC solvent cement trenching refilling & test of joints complete as per the direction of Engineer-in-charge. External work |
| 109 | 50 mm nominal outer dia pipes |
| 110 | 65 mm nominal Inner dia pipes |
| 111 | Providing and fixing chlorinated polyinyle chloride(CPVC) pipis, having thermal stability for ot & cold water supply,including all CPVC plain & Brass threded fittings, including fixing the pipe with clamps at 1.00 m spacing Tis includes joining of pipes & fitting with one step CPVC solvent cement and testing of Jointscomplete as per direction of Engineer in charge. Internal work-Exposed on Wall |
| 112 | 40 mm nominal outer dia pipe |
| 113 | Providing and fixing chlorinated Polyvinyle chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement annnd the cost of cutting chases and making good the same including testing of joints complet as er direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. |
| 114 | 20mm nominal outer dia Pipes |
| 115 | 25 mm nominal dia pipes |
| 116 | Providing and fixing white viterous china pedestal type water closet (European type) with seat and lid. 10 litre low level white vitreous china flushing cisternnnnnnnnnn & C.P . Flush bend with fittings & C.I brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approvad municipal design complete, including painting of fitting and bracket, cutting and making good the walls and floors whereever required |
| 117 | W.C pan with ISI marked white solid plastic seat and lid. |
| 118 | Providing and fixing 8 mm dia C.P / SS jet with flexible tube upto 1 metre long with S.S. Triangular plate to European type W.C of qquality and make as approved by Engineer -in-chare. |
| 119 | Providing and fixing wash basin with C.I. brackets , 15 mm C.P. Brass pillar taps, 32 mm C>P brass Waste of standard pattern, including painting of fittings and bracket s, cutting and making good the walls whereever required: |
| 120 | White Vitreous China Wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 121 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm , including painting of fittings and brackets, cutting and making good the walls wherever rerquired.: Kitchen sink without drain board. |
| 122 | 610x460 mm bowl depth 200 mm. |
| 123 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe, |
| 124 | 32 mm dia. |
| 125 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length |
| 126 | 15 mm nominal bore |
| 127 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-charge. |
| 128 | 15 mm nominal dia |
| 129 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 130 | 15 mm nominal bore |
| 131 | Providing and fixing PTMT pillar cock of approved quality and colour |
| 132 | 15 mm nominal bore 107 mm long weighing not less than 110 gms |
| 133 | Providing flanged joints to double fianged C.I./D.I. pipes and special, including testing of joints: |
| 134 | 80 mm diameter pipie |
| 135 | Providing and fixing G.I pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 136 | 40 mm nominal bore |
| 137 | Providing and fixing gun metal non-return valve of approved qulaity (screwd end): 40 mm nominal bore |
| 138 | Horizontal |
| 139 | Providing and placing on terrace (at all floor levels) polythylene water storage tank , IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fitting and the base support fo tank |
| 140 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet |
| 141 | 100 mm diameter |
| 142 | Providing and fixing C.P. litres bid cock of approved quality conforming to IS 8931: |
| 143 | 15 mm nominal bore |
| 144 | SH-C: Construction of Cafeteria |
| 145 | SH: EARTHWORK |
| 146 | Earth work in excavation by mechanical means (Hydraulic Excavated)/ means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm of plan) including dressing of sides and ramming of botoms lift upto 1.5 m, ioncluding getting out the excavated soil and disposal of surplus excavated within a lead of 50m. |
| 147 | Filling available excavated earth(excluding rock) in trtenches plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, leadup to50m and lift upto 1.5 m. |
| 148 | supplying and filling in plinth with sandy soil under floors including , watering, ramming consolidating and dressing complete. |
| 149 | SH.: CEMENT CONCRETE WORK |
| 150 | Providing and laying ion plain cement concrete of specified garde excluding the cost of centering and shuttering-- All work upto plinth level. |
| 151 | 1:5:10 (1 cement : 5 coars sand : 10 graded stone aggregate 40 mm nominal size) |
| 152 | Providing and laying in position specified grade of reinforced cement concrete excluidng the cost of centering shuttering finishing the reinforcement-All work up to plinth level. |
| 153 | 1:1.5:3(1 cement:1.5coars sand:3 graded stone aggregate 20 mm no minal size). |
| 154 | SH: REINFORCEMENT |
| 155 | Reinforcement for R.C.C work including straigthening cutting bending placing inn position and binding all |
| 156 | Thermo-Mechanical Treated bars |
| 157 | SH: FRAME WORK |
| 158 | Centering and shutering including strutiing propping etc. and removal of form for |
| 159 | Foundation, footing, bases of column etc. and mass concrete. |
| 160 | Walls (anhthickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 161 | Lintels, beans, plinths, girders,m bressumers and cantilivers. |
| 162 | Suspended floors, roofs, landings, balconies and access plateform |
| 163 | SH: BRICK WORK: |
| 164 | Brick work list 1st class common burnt day F.P.S( non modular) bricks in foundation and plinth in: |
| 165 | Cement mortor 1:4 (1 cement:4 coars sand) |
| 166 | Half brick massonary with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 167 | Cement mortart 1:3(1 cement: 3 coarse sand) |
| 168 | Half brick masonary with 1st class common burnt clay F.P.S(non modular) bricks in superstructure above plinth level upto floor V level in |
| 169 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 170 | SH : FINISHING WORK |
| 171 | (A) CEMENT PLASTER IN COARSE SAND |
| 172 | 12mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) |
| 173 | 15mm cements plaster on rough side of single or half brick wall finished with a floating coat ofr neat cement of mix |
| 174 | 1: 3 (1 cement : 3 fine sand) |
| 175 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the platered wall surface to prepare the surface even and smooth complete. |
| 176 | Finishing walls with Acrylic smooth exterior paint of required shade- New wortk (two or more coastsw applied @ 1.43 ltr/10sqm. Over the including base of waqter proofing cement paint applied @ 2.20 kg/10 sqm) |
| 177 | SH WOOD WORK |
| 178 | Providing wood work in frames of doors, windows, clerestry windows and other frames wrought framed and fixed in position with hold fast lugs or withj dash fastner of required dia and length (hold fast lugs or dash fastener shall be paid for for separately : A) Local best quality Teak wood. |
| 179 | Providing and fixing glazed shutters for doors, windows and clesretory windows using 4mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of rerquired sizes with necessary screws. Local best qulaity Teak wood A) 35 mm thick. |
| 180 | P/F Brass sliding bolts bright finished or black enamelled with nuts and screws etc. |
| 181 | (a) 300x16 |
| 182 | P.F ISI marked oxidised M.S tower bolt black finish, (Barrel type) with necessary screw etc. complete: |
| 183 | (a) 250x10mm |
| 184 | P/F bright finished brass handles with screws etc. |
| 185 | (a) 125 mm. |
| 186 | Providing & fixing Artificial Bamboo including fixture andall complete. |
| 187 | Providing & fixing UPVC Opening with glass including fixture and all complete |
| 188 | SH: FLOORING WORK: |
| 189 | Providing andlaying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption 's less than 0.08% and conforming to 15:15622 of approved make in all colours andshades laid on 20 mm thiock cement mortor 1:4 (1cement: 4 coarse sand) including grouting the joints withj white cement andmatching pigments etc complete. |
| 190 | Size of tiles 600x600mm |
| 191 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundry, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortor 1:3(1 cement: 3 coars sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pgment of matching shade complet. |
| 192 | SH: STEEL WORK |
| 193 | Steel work in built up tubular (round,m square or rectangular tubes etc) trusses etc. including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washer etc. compete. |
| 194 | Hot finished welded type tubes |
| 195 | SH: ROOFING WORK |
| 196 | Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or l hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins, fafters and trusses and including cutting to size and shape wherevewr required. |
| 197 | 0.80 mm thick with zince coating not less than 275 gm/m2 |
| 198 | Providing & fixing Artificial Thatch lincluding fixture an all complete. |
| 199 | Internal Electrical Installation |
| 200 | Writing for light /Fan point/Exhaust Fan print/call bell point with 1.5 mm 2PVC insulated copper single core cable in PVC insulated casing copper with piano type switch phenolic laminated sheet suitable size MS box and earthing the poiny with 1.5 mm PVC insulated copper conductor single cable etc. as reqd. |
| 201 | 1. Group -A |
| 202 | 2. Group -B |
| 203 | 3 Group-C |
| 204 | Writing for light /power plug with 2 x 4 mm 2 PVC insulated copper conductor single core cable in PVC casing and cpping with 1 no. 4mm 2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd. |
| 205 | Writing for circuit/sub-main writing along withearth wire with (the following sizes of ) PVC insulated copper conductor single core cable in PVC casing and capping etc. as reqd. |
| 206 | 2 x 2.5mm 2+1x1.5 mm 2 earth wire |
| 207 | 2 x 2.5 mm + 2.5 mm2 earthwire |
| 208 | 2 x 4 mm2 1 x 4mm2 earth wire |
| 209 | S/F ( following piano type swith/ socket) on existing switch box/ coveri/c connection etc. as reqd. |
| 210 | 5/6 amps switch |
| 211 | 5/16 amps switch |
| 212 | 3 pin 15/16 amps socket outlet |
| 213 | 6 pin 15/16 amps socket outlet |
| 214 | S/F brass batery/angle bolder i/c connecton etc. as reqd. |
| 215 | S/F 56\\" sweep (1400m) A.C. ceiting fan complete with down rod, canopy, 3(three) blades but without regular etc. as reqd. (Make Bajaj/ Usha or similar) |
| 216 | Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box i/e connection but excluding modular plate etc. as reqd. |
| 217 | S/F 450mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd. |
| 218 | S/F 20 W CFL Lamp |
| 219 | S/F (following way) single/double pole and neutral, sheet steel MCCB distribution board, 240 V on surface/recessed complete with tinned copper but bas neutral bus bar, earth bar, din bar, detachable gland plate interconnection, phosphatized and powder pained inluding earthing etc. as req. (but without MCB/RCCB/isolator |
| 220 | 4 Way single door |
| 221 | Supplying and fixing 5 amp to 32 amp rating 230 v series MCB for lighting and other load for following poles) in the existing MCB DB complete with connection testing and commissioning etc. as reqd |
| 222 | Single pole and neutral |
| 223 | S/F (following rating) double pole 240 V isolator in the existing MCBDB complete with connection testing and commissioning as reqd. |
| 224 | 40 amp. |
| 225 | 10 sq.mm ISI marked, FR PVC insulated single core copper conductor cable. |
| 226 | S/F of metal Boxes with phenolic laminated sheet cover in front |
| 227 | 250 mm x 300mm x 100 mm deep |
| 228 | Earthing with G.I earth pipe 4.5 m long 40 mm dia i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd. |
| 229 | Extra for using salt and charcoal for pipe earth electrode as reqd. |
| 230 | P/L earth connection from earth electrode with 4 mm dia copper wire in 15mm dia G.I. pipe as reqd, |
| 231 | 60 amp/63 amp 500 V T.P.I.C switch (Kitkat) |
| 232 | Fire extinguisher |
| 233 | Internal Water Supply and SanitaryInstallation |
| 234 | Providing and fixing chlorinated polyvinyle chloride (PVC) pipes, having thermall stability for hot & cold watr supply including all CPVC plain & Brass threaded fitting. This includes joining of pipes & fittings with one step CPVC solvent cement trenching refilling & test of joints complete as per the direction of Engineer-in-charge. External work |
| 235 | 50 mm nominal outer dia pipes |
| 236 | 65 mm nominal Inner dia pipes |
| 237 | Providing and fixing chlorinated polyinyle chloride(CPVC) pipis, having thermal stability for ot & cold water supply,including all CPVC plain & Brass threded fittings, including fixing the pipe with clamps at 1.00 m spacing Tis includes joining of pipes & fitting with one step CPVC solvent cement and testing of Jointscomplete as per direction of Engineer in charge. Internal work-Exposed on Wall |
| 238 | 40 mm nominal outer dia pipe |
| 239 | Providing and fixing chlorinated Polyvinyle chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement annnd the cost of cutting chases and making good the same including testing of joints complet as er direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. |
| 240 | 20mm nominal outer dia Pipes |
| 241 | 25 mm nominal dia pipes |
| 242 | Providing and fixing white viterous china pedestal type water closet (European type) with seat and lid. 10 litre low level white vitreous china flushing cisternnnnnnnnnn & C.P . Flush bend with fittings & C.I brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approvad municipal design complete, including painting of fitting and bracket, cutting and making good the walls and floors whereever required |
| 243 | W.C pan with ISI marked white solid plastic seat and lid. |
| 244 | Providing and fixing 8 mm dia C.P / SS jet with flexible tube upto 1 metre long with S.S. Triangular plate to European type W.C of qquality and make as approved by Engineer -in-chare. |
| 245 | Providing and fixing white viterous china flat back half stallurinal of size 580x350 mm with white PVC automatic flushing cistern, with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors whereever required |
| 246 | Siingle half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 247 | Providing and fixing wash with C.I.brackets, 15mm C.P. brass pillar taps 32 mm C.P brass waste of standad pattern, including painting of fittings and brackets, cuting and making good the walls wherever required. |
| 248 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P brass pillar taps. |
| 249 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm , including painting of fittings and brackets, cutting and making good the walls wherever rerquired.: Kitchen sink without drain board. |
| 250 | 610x460 mm bowl edepth 200 mm. |
| 251 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe, |
| 252 | 32 mm dia. |
| 253 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length |
| 254 | 15 mm nominal bore |
| 255 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-charge. |
| 256 | 15 mm nominal dia |
| 257 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 258 | 15 mm nominal bore |
| 259 | Providing and fixing PTMT pillar cock of approved quality and colour |
| 260 | 15 mm nominal bore 107 mm long weighing not less than 110 gms |
| 261 | Providing flanged joints to double fianged C.I./D.I. pipes and special, including testing of joints: |
| 262 | 80 mm diameter pipie |
| 263 | Providing and fixing G.I pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 264 | 40 mm nominal bore |
| 265 | Providing and fixing gun metal non-return valve of approved qulaity (screwd end): 40 mm nominal bore |
| 266 | Horizontal |
| 267 | Providing and placing on terrace (at all floor levels) polythylene water storage tank , IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fitting and the base support fo tank |
| 268 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet |
| 269 | 100 mm diameter |
| 270 | Providing and fixing C.P. litres bid cock of approved quality conforming to IS 8931: |
| 271 | 15 mm nominal bore |
| 272 | SH-D: Construction of Children Park |
| 273 | Providing & fixing kid Monkey Bar including fixture and all complete |
| 274 | Providing & fixing kid small Climber and Slides including fixture and all complete. |
| 275 | Providing & fixing Kid Jungle Adventure including fixture and all complete. |
| 276 | Providing & fixing Kid Vine Climber including fixture and all complete. |
| 277 | Providing & fixing Kid Swings & Mary Gold Round including fixture and all complete. |
| 278 | Supplying and filling in plinth with sandy soil under floorsw including , watering , ramming consolidating and dressing complete. |
| 279 | Providing and laying in plain cement concrete of specified grade excluding the cost of centering and shuttering. |
| 280 | a) 1:4:8 (1 Cement : 4 Coars sand : 8 graded stone aggregate 40 mm nominal size) |
| 281 | SH-E: Development of Kaina Garden. |
| 282 | Preparation and surface Treatement of formation. (Preparation and surface treatment of formation by removing mud and slurry, mwatering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310) |
| 283 | Spreading of sludge Farm Yard Manure or /and good Earth (Spreading of sluge farm yard manure or/ and good earth in required thickness (cost of sludge, farm-yard manure or/and good earth to be paid for separately) |
| 284 | Grassing with ' Doobs \\" Grass (Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed) (ii) in rows 7.5 cm apart in either direction. |
| 285 | Cost of Providing Plants including Planting Materials and all complete. |
| 286 | Maintenance of Lawns with Fine Grassing for the First Year including watering etc. |
| 287 | Manure/fertilizer and Plant protection Chemical. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender