Law and Justice Government Departments Closing in 19 days TDR #56685041

Bids Are invited for Cutting Tools Hand Tools And Measuring Instrument

Issued by Government Departments · Khordha, Odisha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
19 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
2286
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Bids Are invited for Cutting Tools Hand Tools And Measuring Instrument Straight Grinding Wheel- 200 X 20 X 31.75Mm , Straight Grinding Wheel-150 X 13 X 31.75 , Diamond Dresser-1.5 Carat Type-A-Dia 10 X 80 X 1.5 , Tool Makers Small Pin Type- Steel Grinding Precision Vice- 4 Inch , Tool Makers Small Pin Type- Steel Grinding Precision Vice- 2 Inch , Allen Key Set , Allen Key 12Mm , Ring Spanner 16-17Mm , Ring Spanner 18-19Mm , Ring Spanner 21-23Mm , Ring Spanner 20-22Mm , Ring Spanner 24-27Mm , Ring Spanner 25-28Mm , Ring Spanner 30-32Mm , Open Spanner 20-22Mm , Open Spanner 21-23Mm , Open Spanner 18-19Mm , Adjustable Spanner 8Inch-200Mm , Bevel Edge Try Square- 6Inch , Tool Maker Try Square - 4Inch , Liver Types Dial Test Indicator -0.01Mm , Plunger Type Dial Test Indicator 0-10Mm, 0.01Mm Lc , Mechanical Vernier Caliper 0-150Mm , Mechanical Vernier Caliper 0-200Mm , Mechanical Vernier Caliper 0-300Mm , Outside Micro Meter 0-25Mm , Outside Micro Meter 25-50Mm , Outside Micro Meter 50-75Mm , Screw Pitch Gauge 52 Leaves , 0.25-6Mm , Locking Type Radius Gauge With 0.25 Mm Step And 34 Leaves 1-7Mm , Straight Edge 100Mm, 4Inch , Insert Oaku060508sr-M 50 Ctpp235 Ceratizit , Insert Screw M5x16, Make- Ceratizit, Oaku060508sr-M 50 Ctpp235 , Insert Screw Driver T20, Make- Ceratizit , Face Mill Cuter Dia 100Mm Suitable To Hnpj 0905Ansgd-Kcpm40 Insert, Make- Kennametal , Face Mill Cuter Dia 80Mm Suitable To Hnpj 0905Ansgd-Kcpm40 Insert, Make- Kennametal , Insert Suitable To Hnpj 0905Ansgd-Kcpm40 Insert, Make Kennametal , Insert Screw M4x14 , Make- Kennametal, Hnpj 0905Ansgd-Kcpm40 , Insert Screw Driver T15, Make- Kennametal , Hand Tap Set M5x0.8 , Hand Tap Set M6x1 , Hand Tap Set M8x1.25 , Hand Tap Set M12x1.75 , Die Stock M6x1 , Die Stock M10x1.5 , Die Stock M16x2.0 , Parallel Shank Hand Reamer Dia 10H7 , Parallel Shank Hand Reamer Dia 6H7 , Parallel Shank Hand Reamer Dia 8H7 , Parallel Shank Hand Reamer Dia 5H7 , Parallel Shank Hand Reamer Dia 4H7 , Die Stock Handle M6 , Die Stock Handle M10x1.5 , Die Stock Handle M16x2.0 , M2 - M6 Adjustable Tap Wrench Handle , M4 - M10 Adjustable Tap Wrench Handle , M4 - M12 Tap Wrench , Hss End Mill Cutter Dia 6Mm , Hss End Mill Cutter Dia 8Mm , Hss End Mill Cutter Dia 10Mm , Hss End Mill Cutter Dia 14Mm , Hss End Mill Cutter Dia 16Mm , Hss End Mill Cutter Dia 20Mm , Hss End Mill Cutter Dia 25Mm , Slot Drill Cutter Dia 6Mm , Slot Drill Cutter Dia 8Mm , Slot Drill Cutter Dia 10Mm , Slot Drill Cutter Dia 14Mm , Slot Drill Cutter Dia 16Mm , Slot Drill Cutter Dia 20Mm , Slot Drill Cutter Dia 25Mm , Parallel Shank Twist Drill Bit Dia 3.4Mm , Parallel Shank Twist Drill Bit Dia 4.0Mm , Parallel Shank Twist Drill Bit Dia 4.2Mm , Parallel Shank Twist Drill Bit Dia 4.4Mm , Parallel Shank Twist Drill Bit Dia 4.5Mm , Parallel Shank Twist Drill Bit Dia 5.0Mm , Parallel Shank Twist Drill Bit Dia 5.5Mm , Parallel Shank Twist Drill Bit Dia 5.8Mm , Parallel Shank Twist Drill Bit Dia 6.5Mm , Parallel Shank Twist Drill Bit Dia 7.8Mm , Parallel Shank Twist Drill Bit Dia 8.0Mm , Parallel Shank Twist Drill Bit Dia 8.5Mm , Parallel Shank Twist Drill Bit Dia 9.0Mm , Parallel Shank Twist Drill Bit Dia 9.5Mm , Parallel Shank Twist Drill Bit Dia 9.8Mm , Parallel Shank Twist Drill Bit Dia 10.0Mm , Parallel Shank Twist Drill Bit Dia 10.2Mm , Parallel Shank Twist Drill Bit Dia 11.0Mm , Taper Shank Twist Drill Bit Dia 15.0Mm , Taper Shank Twist Drill Bit Dia 18.0Mm , Taper Shank Twist Drill Bit Dia 27.0Mm , Flat Drill Bit Dia 11.0Mm , Flat Drill Bit Dia 10.0Mm , Counter Bore Drill Bit Dia 5Xdia 9Mm , Center Punch 90Degree X 100Mm , Centre Drill Type-A Dia 2.5 X 6.30 , Centre Drill Type-A Dia 4 X 10 , Sleeve Mt1 By 2 , Sleeve Mt1 By 3 , Sleeve Mt2 By 3 , Sleeve Mt3 By 4 , Key Less Drill Chuck Dia 1-Dia 13Mm Mt3 , Flat Cut Bastard File 12 Inch , Triangular Smooth File 6 Inch , Flat Smooth File 6 Inch , Knife Edge File 6 Inch , Soft Hammer 250Gm , Ball Pein Hammer 500Gm , Flat Jewelers File 4Inch , Hand Hacksaw Frame 300Mm , Hand Hacksaw Blade 18Tpi , Make- Mirinda Or Bipico , Single Point Cutting Tool 1By2 X 8Inch , Single Point Cutting Tool 3By8 X8inch , Lathe Dog Bent Type Dia 15 , Lathe Dog Bent Type Dia 15 , Lathe Dog Bent Type Dia 30 , Lathe Dog Bent Type Dia 35 , Diamond Knurling Tool Pivot Head Medium Diamond Metric Pitches, 1By2 Inch Sq. Shank Small Double Roller , Diamond Knurling Tool Pivot Head Medium Diamond Metric Pitches, 1By2 Inch Sq. Shank Medium Double Roller , Revolving Center Mt3

BOQ

Sl. No. Item TitleItem Description
1Straight grinding wheel- 200 X 20 X 31.75mmDetail Tech Spec as per Annex-V, G-A
2Straight grinding wheel-150 X 13 X 31.75Detail Tech Spec as per Annex-V, G-A
3Diamond dresser-1.5 carat type-A-Dia 10 X 80 X 1.5Detail Tech Spec as per Annex-V, G-A
4Tool Makers Small Pin Type- Steel Grinding Precision Vice- 4 inchDetail Tech Spec as per Annex-V, G-A
5Tool Makers Small Pin Type- Steel Grinding Precision Vice- 2 inchDetail Tech Spec as per Annex-V, G-A
6Allen key setDetail Tech Spec as per Annex-V, G-B
7Allen key 12mmDetail Tech Spec as per Annex-V, G-B
8Ring spanner 16-17mmDetail Tech Spec as per Annex-V, G-B
9Ring spanner 18-19mmDetail Tech Spec as per Annex-V, G-B
10Ring spanner 21-23mmDetail Tech Spec as per Annex-V, G-B
11Ring spanner 20-22mmDetail Tech Spec as per Annex-V, G-B
12Ring spanner 24-27mmDetail Tech Spec as per Annex-V, G-B
13Ring spanner 25-28mmDetail Tech Spec as per Annex-V, G-B
14Ring spanner 30-32mmDetail Tech Spec as per Annex-V, G-B
15Open spanner 20-22mmDetail Tech Spec as per Annex-V, G-B
16Open spanner 21-23mmDetail Tech Spec as per Annex-V, G-B
17Open spanner 18-19mmDetail Tech Spec as per Annex-V, G-B
18Adjustable spanner 8inch-200mmDetail Tech Spec as per Annex-V, G-B
19Bevel edge try square- 6inchDetail Tech Spec as per Annex-V, G-C
20Tool maker try square - 4inchDetail Tech Spec as per Annex-V, G-C
21Liver types Dial test indicator -0.01mmDetail Tech Spec as per Annex-V, G-C
22Plunger type Dial test indicator 0-10mm, 0.01mm LCDetail Tech Spec as per Annex-V, G-C
23Mechanical vernier caliper 0-150mmDetail Tech Spec as per Annex-V, G-C
24Mechanical vernier caliper 0-200mmDetail Tech Spec as per Annex-V, G-C
25Mechanical vernier caliper 0-300mmDetail Tech Spec as per Annex-V, G-C
26Outside micro meter 0-25mmDetail Tech Spec as per Annex-V, G-C
27Outside micro meter 25-50mmDetail Tech Spec as per Annex-V, G-C
28Outside micro meter 50-75mmDetail Tech Spec as per Annex-V, G-C
29Screw pitch gauge 52 leaves , 0.25-6mmDetail Tech Spec as per Annex-V, G-C
30Locking type radius gauge with 0.25 mm step and 34 leaves 1-7mmDetail Tech Spec as per Annex-V, G-C
31Straight edge 100mm, 4inchDetail Tech Spec as per Annex-V, G-C
32Insert OAKU060508SR-M 50 CTPP235 ceratizitDetail Tech Spec as per Annex-V, G-D
33Insert screw M5X16, Make- Ceratizit, OAKU060508SR-M 50 CTPP235Detail Tech Spec as per Annex-V, G-D
34Insert screw driver T20, Make- CeratizitDetail Tech Spec as per Annex-V, G-D
35Face mill cuter Dia 100mm suitable to HNPJ 0905ANSGD-KCPM40 insert, Make- KennametalDetail Tech Spec as per Annex-V, G-E
36Face mill cuter Dia 80mm suitable to HNPJ 0905ANSGD-KCPM40 insert, Make- KennametalDetail Tech Spec as per Annex-V, G-E
37Insert suitable to HNPJ 0905ANSGD-KCPM40 insert, make KennametalDetail Tech Spec as per Annex-V, G-E
38Insert screw M4x14 , Make- Kennametal, HNPJ 0905ANSGD-KCPM40Detail Tech Spec as per Annex-V, G-E
39Insert screw driver T15, Make- KennametalDetail Tech Spec as per Annex-V, G-E
40Hand tap set M5X0.8Detail Tech Spec as per Annex-V, G-F
41Hand tap set M6X1Detail Tech Spec as per Annex-V, G-F
42Hand tap set M8X1.25Detail Tech Spec as per Annex-V, G-F
43Hand tap set M12X1.75Detail Tech Spec as per Annex-V, G-F
44Die stock M6X1Detail Tech Spec as per Annex-V, G-F
45Die stock M10X1.5Detail Tech Spec as per Annex-V, G-F
46Die stock M16X2.0Detail Tech Spec as per Annex-V, G-F
47Parallel shank hand reamer Dia 10H7Detail Tech Spec as per Annex-V, G-F
48Parallel shank hand reamer Dia 6H7Detail Tech Spec as per Annex-V, G-F
49Parallel shank hand reamer Dia 8H7Detail Tech Spec as per Annex-V, G-F
50Parallel shank hand reamer Dia 5H7Detail Tech Spec as per Annex-V, G-F
51Parallel shank hand reamer Dia 4H7Detail Tech Spec as per Annex-V, G-F
52Die stock handle M6Detail Tech Spec as per Annex-V, G-F
53Die stock handle M10X1.5Detail Tech Spec as per Annex-V, G-F
54Die stock handle M16X2.0Detail Tech Spec as per Annex-V, G-F
55M2 - M6 Adjustable Tap Wrench HandleDetail Tech Spec as per Annex-V, G-F
56M4 - M10 Adjustable Tap Wrench HandleDetail Tech Spec as per Annex-V, G-F
57M4 - M12 Tap WrenchDetail Tech Spec as per Annex-V, G-F
58HSS end mill cutter Dia 6mmDetail Tech Spec as per Annex-V, G-G
59HSS end mill cutter Dia 8mmDetail Tech Spec as per Annex-V, G-G
60HSS end mill cutter Dia 10mmDetail Tech Spec as per Annex-V, G-G
61HSS end mill cutter Dia 14mmDetail Tech Spec as per Annex-V, G-G
62HSS end mill cutter Dia 16mmDetail Tech Spec as per Annex-V, G-G
63HSS end mill cutter Dia 20mmDetail Tech Spec as per Annex-V, G-G
64HSS end mill cutter Dia 25mmDetail Tech Spec as per Annex-V, G-G
65Slot drill cutter Dia 6mmDetail Tech Spec as per Annex-V, G-G
66Slot drill cutter Dia 8mmDetail Tech Spec as per Annex-V, G-G
67Slot drill cutter Dia 10mmDetail Tech Spec as per Annex-V, G-G
68Slot drill cutter Dia 14mmDetail Tech Spec as per Annex-V, G-G
69Slot drill cutter Dia 16mmDetail Tech Spec as per Annex-V, G-G
70Slot drill cutter Dia 20mmDetail Tech Spec as per Annex-V, G-G
71Slot drill cutter Dia 25mmDetail Tech Spec as per Annex-V, G-G
72Parallel shank twist drill bit Dia 3.4mmDetail Tech Spec as per Annex-V, G-G
73Parallel shank twist drill bit Dia 4.0mmDetail Tech Spec as per Annex-V, G-G
74Parallel shank twist drill bit Dia 4.2mmDetail Tech Spec as per Annex-V, G-G
75Parallel shank twist drill bit Dia 4.4mmDetail Tech Spec as per Annex-V, G-G
76Parallel shank twist drill bit Dia 4.5mmDetail Tech Spec as per Annex-V, G-G
77Parallel shank twist drill bit Dia 5.0mmDetail Tech Spec as per Annex-V, G-G
78Parallel shank twist drill bit Dia 5.5mmDetail Tech Spec as per Annex-V, G-G
79Parallel shank twist drill bit Dia 5.8mmDetail Tech Spec as per Annex-V, G-G
80Parallel shank twist drill bit Dia 6.5mmDetail Tech Spec as per Annex-V, G-G
81Parallel shank twist drill bit Dia 7.8mmDetail Tech Spec as per Annex-V, G-G
82Parallel shank twist drill bit Dia 8.0mmDetail Tech Spec as per Annex-V, G-G
83Parallel shank twist drill bit Dia 8.5mmDetail Tech Spec as per Annex-V, G-G
84Parallel shank twist drill bit Dia 9.0mmDetail Tech Spec as per Annex-V, G-G
85Parallel shank twist drill bit Dia 9.5mmDetail Tech Spec as per Annex-V, G-G
86Parallel shank twist drill bit Dia 9.8mmDetail Tech Spec as per Annex-V, G-G
87Parallel shank twist drill bit Dia 10.0mmDetail Tech Spec as per Annex-V, G-G
88Parallel shank twist drill bit Dia 10.2mmDetail Tech Spec as per Annex-V, G-G
89Parallel shank twist drill bit Dia 11.0mmDetail Tech Spec as per Annex-V, G-G
90Taper shank twist drill bit Dia 15.0mmDetail Tech Spec as per Annex-V, G-G
91Taper shank twist drill bit Dia 18.0mmDetail Tech Spec as per Annex-V, G-G
92Taper shank twist drill bit Dia 27.0mmDetail Tech Spec as per Annex-V, G-G
93Flat drill bit Dia 11.0mmDetail Tech Spec as per Annex-V, G-G
94Flat drill bit Dia 10.0mmDetail Tech Spec as per Annex-V, G-G
95Counter bore drill bit Dia 5xDia 9mmDetail Tech Spec as per Annex-V, G-G
96Center punch 90Degree x 100mmDetail Tech Spec as per Annex-V, G-G
97Centre drill type-A Dia 2.5 X 6.30Detail Tech Spec as per Annex-V, G-G
98Centre drill type-A Dia 4 X 10Detail Tech Spec as per Annex-V, G-G
99Sleeve MT1 by 2Detail Tech Spec as per Annex-V, G-H
100Sleeve MT1 by 3Detail Tech Spec as per Annex-V, G-H
101Sleeve MT2 by 3Detail Tech Spec as per Annex-V, G-H
102Sleeve MT3 by 4Detail Tech Spec as per Annex-V, G-H
103Key less Drill chuck Dia 1-Dia 13mm MT3Detail Tech Spec as per Annex-V, G-H
104Flat cut bastard file 12 inchDetail Tech Spec as per Annex-V, G-I
105Triangular smooth file 6 inchDetail Tech Spec as per Annex-V, G-I
106Flat smooth file 6 inchDetail Tech Spec as per Annex-V, G-I
107Knife edge file 6 inchDetail Tech Spec as per Annex-V, G-I
108Soft hammer 250gmDetail Tech Spec as per Annex-V, G-I
109Ball pein hammer 500gmDetail Tech Spec as per Annex-V, G-I
110Flat jewelers file 4inchDetail Tech Spec as per Annex-V, G-I
111Hand hacksaw frame 300mmDetail Tech Spec as per Annex-V, G-I
112Hand hacksaw blade 18TPI , MAKE- MIRINDA or BIPICODetail Tech Spec as per Annex-V, G-I
113Single point cutting tool 1by2 X 8inchDetail Tech Spec as per Annex-V, G-J
114Single point cutting tool 3by8 x8inchDetail Tech Spec as per Annex-V, G-J
115Lathe dog bent type Dia 15Detail Tech Spec as per Annex-V, G-J
116Lathe dog bent type Dia 15Detail Tech Spec as per Annex-V, G-J
117Lathe dog bent type Dia 30Detail Tech Spec as per Annex-V, G-J
118Lathe dog bent type Dia 35Detail Tech Spec as per Annex-V, G-J
119Diamond knurling tool pivot head medium Diamond metric pitches, 1by2 inch sq. Shank Small double rollerDetail Tech Spec as per Annex-V, G-J
120Diamond knurling tool pivot head medium Diamond metric pitches, 1by2 inch sq. Shank medium double rollerDetail Tech Spec as per Annex-V, G-J
121Revolving center MT3Detail Tech Spec as per Annex-V, G-J

AI Tender Summary

OUR REF NO 56685041
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 17-08-2026
Authority
Authority Name Micro Small And Medium Enterprises
Work Description Bids Are invited for Cutting Tools Hand Tools And Measuring Instrument Straight Grinding Wheel- 200 X 20 X 31.75Mm , Straight Grinding Wheel-150 X 13 X 31.75 , Diamond Dresser-1.5 Carat Type-A-Dia 10 X 80 X 1.5 , Tool Makers Small Pin Type- Steel Grinding Precision Vice- 4 Inch , Tool Makers Small Pin Type- Steel Grinding Precision Vice- 2 Inch , Allen Key Set , Allen Key 12Mm , Ring Spanner 16-17Mm , Ring Spanner 18-19Mm , Ring Spanner 21-23Mm , Ring Spanner 20-22Mm , Ring Spanner 24-27Mm , Ring Spanner 25-28Mm , Ring Spanner 30-32Mm , Open Spanner 20-22Mm , Open Spanner 21-23Mm , Open Spanner 18-19Mm , Adjustable Spanner 8Inch-200Mm , Bevel Edge Try Square- 6Inch , Tool Maker Try Square - 4Inch , Liver Types Dial Test Indicator -0.01Mm , Plunger Type Dial Test Indicator 0-10Mm, 0.01Mm Lc , Mechanical Vernier Caliper 0-150Mm , Mechanical Vernier Caliper 0-200Mm , Mechanical Vernier Caliper 0-300Mm , Outside Micro Meter 0-25Mm , Outside Micro Meter 25-50Mm , Outside Micro Meter 50-75Mm , Screw Pitch Gauge 52 Leaves , 0.25-6Mm , Locking Type Radius Gauge With 0.25 Mm Step And 34 Leaves 1-7Mm , Straight Edge 100Mm, 4Inch , Insert Oaku060508sr-M 50 Ctpp235 Ceratizit , Insert Screw M5x16, Make- Ceratizit, Oaku060508sr-M 50 Ctpp235 , Insert Screw Driver T20, Make- Ceratizit , Face Mill Cuter Dia 100Mm Suitable To Hnpj 0905Ansgd-Kcpm40 Insert, Make- Kennametal , Face Mill Cuter Dia 80Mm Suitable To Hnpj 0905Ansgd-Kcpm40 Insert, Make- Kennametal , Insert Suitable To Hnpj 0905Ansgd-Kcpm40 Insert, Make Kennametal , Insert Screw M4x14 , Make- Kennametal, Hnpj 0905Ansgd-Kcpm40 , Insert Screw Driver T15, Make- Kennametal , Hand Tap Set M5x0.8 , Hand Tap Set M6x1 , Hand Tap Set M8x1.25 , Hand Tap Set M12x1.75 , Die Stock M6x1 , Die Stock M10x1.5 , Die Stock M16x2.0 , Parallel Shank Hand Reamer Dia 10H7 , Parallel Shank Hand Reamer Dia 6H7 , Parallel Shank Hand Reamer Dia 8H7 , Parallel Shank Hand Reamer Dia 5H7 , Parallel Shank Hand Reamer Dia 4H7 , Die Stock Handle M6 , Die Stock Handle M10x1.5 , Die Stock Handle M16x2.0 , M2 - M6 Adjustable Tap Wrench Handle , M4 - M10 Adjustable Tap Wrench Handle , M4 - M12 Tap Wrench , Hss End Mill Cutter Dia 6Mm , Hss End Mill Cutter Dia 8Mm , Hss End Mill Cutter Dia 10Mm , Hss End Mill Cutter Dia 14Mm , Hss End Mill Cutter Dia 16Mm , Hss End Mill Cutter Dia 20Mm , Hss End Mill Cutter Dia 25Mm , Slot Drill Cutter Dia 6Mm , Slot Drill Cutter Dia 8Mm , Slot Drill Cutter Dia 10Mm , Slot Drill Cutter Dia 14Mm , Slot Drill Cutter Dia 16Mm , Slot Drill Cutter Dia 20Mm , Slot Drill Cutter Dia 25Mm , Parallel Shank Twist Drill Bit Dia 3.4Mm , Parallel Shank Twist Drill Bit Dia 4.0Mm , Parallel Shank Twist Drill Bit Dia 4.2Mm , Parallel Shank Twist Drill Bit Dia 4.4Mm , Parallel Shank Twist Drill Bit Dia 4.5Mm , Parallel Shank Twist Drill Bit Dia 5.0Mm , Parallel Shank Twist Drill Bit Dia 5.5Mm , Parallel Shank Twist Drill Bit Dia 5.8Mm , Parallel Shank Twist Drill Bit Dia 6.5Mm , Parallel Shank Twist Drill Bit Dia 7.8Mm , Parallel Shank Twist Drill Bit Dia 8.0Mm , Parallel Shank Twist Drill Bit Dia 8.5Mm , Parallel Shank Twist Drill Bit Dia 9.0Mm , Parallel Shank Twist Drill Bit Dia 9.5Mm , Parallel Shank Twist Drill Bit Dia 9.8Mm , Parallel Shank Twist Drill Bit Dia 10.0Mm , Parallel Shank Twist Drill Bit Dia 10.2Mm , Parallel Shank Twist Drill Bit Dia 11.0Mm , Taper Shank Twist Drill Bit Dia 15.0Mm , Taper Shank Twist Drill Bit Dia 18.0Mm , Taper Shank Twist Drill Bit Dia 27.0Mm , Flat Drill Bit Dia 11.0Mm , Flat Drill Bit Dia 10.0Mm , Counter Bore Drill Bit Dia 5Xdia 9Mm , Center Punch 90Degree X 100Mm , Centre Drill Type-A Dia 2.5 X 6.30 , Centre Drill Type-A Dia 4 X 10 , Sleeve Mt1 By 2 , Sleeve Mt1 By 3 , Sleeve Mt2 By 3 , Sleeve Mt3 By 4 , Key Less Drill Chuck Dia 1-Dia 13Mm Mt3 , Flat Cut Bastard File 12 Inch , Triangular Smooth File 6 Inch , Flat Smooth File 6 Inch , Knife Edge File 6 Inch , Soft Hammer 250Gm , Ball Pein Hammer 500Gm , Flat Jewelers File 4Inch , Hand Hacksaw Frame 300Mm , Hand Hacksaw Blade 18Tpi , Make- Mirinda Or Bipico , Single Point Cutting Tool 1By2 X 8Inch , Single Point Cutting Tool 3By8 X8inch , Lathe Dog Bent Type Dia 15 , Lathe Dog Bent Type Dia 15 , Lathe Dog Bent Type Dia 30 , Lathe Dog Bent Type Dia 35 , Diamond Knurling Tool Pivot Head Medium Diamond Metric Pitches, 1By2 Inch Sq. Shank Small Double Roller , Diamond Knurling Tool Pivot Head Medium Diamond Metric Pitches, 1By2 Inch Sq. Shank Medium Double Roller , Revolving Center Mt3
Basic Detail
Tender No GEM/2026/B/7839936
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 27 Jul 2026
Submission Date 17 Aug 2026
Open Date 17 Aug 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Available
Document List
ed557931-069f-43cb-b008-cce4c6a3d69a.pdf
9667505_Boq_1.xlsx
tech_spec_2026-07-27-15-37-03_2e724d2fe39f72d3de7602d02d41026d.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Aug 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
pdf

ed557931-069f-43cb-b008-cce4c6a3d69a.pdf

xlsx

9667505_Boq_1.xlsx

pdf

tech_spec_2026-07-27-15-37-03_2e724d2fe39f72d3de7602d02d41026d.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders