Tender For Construction Of Phc Luwangsangbam, Imphal East
Tender Value
3.85 Crore
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
7.70 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangpokpi → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Phc Luwangsangbam, Imphal East
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All Kinds of Soil |
| 3 | Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | Supplying and filling in plinth with sandy soil under floors including watering, ramming, consolidating & dressing complete. |
| 5 | CEMENT CONCRETE WORKS: |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 7 | 1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 8 | 1:5:10 (1 Cement:5 coarse sand:10 graded stone aggregate: 40 mm nominal size). |
| 9 | Providing & laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 10 | MISCELLANEOUS: |
| 11 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouded with fine sand including finishing the top smooth. |
| 12 | R.C.C.WORKS: |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level |
| 14 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 16 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 17 | R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) |
| 18 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 19 | Thermo-Mechanically Treated bars |
| 20 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Above Plinth Level. |
| 21 | Thermo-Mechanically Treated bars |
| 22 | FORM WORKS: |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 24 | Foundations, footings, bases of columns, etc. for mass concrete |
| 25 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick |
| 26 | Suspended floors, roofs, andings, balconies and access platform with water proof ply 12 mm thick. |
| 27 | Columns, pillars, piers, abutments, posts and struts. |
| 28 | Stairs, (excluding landings) except spiral staircases. |
| 29 | BRICK WORKS: |
| 30 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 31 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 32 | Half brick masonry 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 33 | Cement mortar 1: 3 ( 1 cement: 3 coarse sand ) |
| 34 | Extra for half brick masonry in superstructure, above Floor V level for every four floors or part thereof by mechanical means by lifting materials using mobile crane |
| 35 | Brick edging 7cm wide 11.4 cm deep to plinth protection with 1st class common burnt clay F.P.S. (non modular) bricks i/c grouting with cement mortar 1:4(1 cement:4 fine sand). |
| 36 | WOOD WORKS |
| 37 | Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought frameed & fixed in position with hold fast lugs or dash fastener shall be paid for separately: |
| 38 | Local best quality teakwood |
| 39 | Providnig and fixing panelled or panalled and glazed shutters for foors, windows and celestory windows including ISI marked M.S. butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all completely asd per direction of Engineer-in-charge. |
| 40 | Local best quality teakwood |
| 41 | 35mm thick shutters |
| 42 | Providing & fixing M.S. Grills of required pattern in frames of windows etc. With M.S. Flats, square or round bars etc. Including priming coat with approved steel primers all complete. |
| 43 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 44 | Providing & fixing 25 mm thick shutters for cup-board etc. i/c ISI marked black enamelled M.S. butt hinges with necessary screws. |
| 45 | Panelled or panelled and Glazed shutters |
| 46 | Ist Class Teak |
| 47 | Providing & fixing bright finished bars 100 mm door mortice latch with one dead bolt & a pair of levers handles with necessary screws etc. complete (Best make of approved quality) |
| 48 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : |
| 49 | 300x16x5mm |
| 50 | Providing & fixing bright finished brass Tower bolts (barrel type) with necessary screws etc. complete. |
| 51 | 250x10 mm |
| 52 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 53 | 125 mm |
| 54 | FLOORING: |
| 55 | Cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement. |
| 56 | 18 mm thick |
| 57 | Providing and laying Vitrified tiles in floor in diffe rent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.080/0 and conforming to 19.15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will bo done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 58 | Double charge vitrified tile polished finish of size - Size of Tile 600 x 600 mm |
| 59 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in alt colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (I cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 60 | Marble stone flooring with 18mm thick marble stone (sample Of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with |
| 61 | Makrana White second quality |
| 62 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete |
| 63 | Marble tiles(polished) Raj Nagar |
| 64 | 8 mm thick |
| 65 | ALUMINIUM WINDOWS |
| 66 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions Of Engineer-incharge. (Glazing and panelling to be paid for separately): |
| 67 | For fixed portion. |
| 68 | Anodised aluminium (anodised transparent or dyed to required kg940.50 shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 69 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 70 | Anodised aluminium (anodised transparent or dyed to required kg Rss 1.03280 shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 71 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 72 | With float glass panes of 5.50 mm thickness |
| 73 | FINISHING: |
| 74 | 6 mm cement plaster of mix |
| 75 | 1:3(1 Cement:3 fine sand) |
| 76 | 12 mm cement plaster of mix 1:4 (1 cement:4 coarse sand). |
| 77 | (1 cement:4 coarse sand) |
| 78 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement:4 coarse sand). |
| 79 | 1:4 (1 cement:4 coarse sand). |
| 80 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 81 | New work(two or more coats)over and including priming coat with cement primer |
| 82 | Finishing walls with textured exterior paint of required shade: |
| 83 | New Work(two or more coats applied @3.28 ltr/10 Sqm)over and including base coat of water proofing cement paint [email protected]/10 sqm. |
| 84 | Applying priming coat:- |
| 85 | With ready mix pink or grey primer of approved brand and manufacture on wood work(hard and soft wood) |
| 86 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth |
| 87 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 88 | Two or more coats on new work |
| 89 | MISCELLANEOUS |
| 90 | FLOORING |
| 91 | Providing and laying Self Adhesive PU Tactile Tile all complete |
| 92 | STEEL WORKS |
| 93 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffinge polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 94 | Providing and fixing ADA Braille Signage complete. |
| 95 | Providing and fixing Staicase Strip. complete. |
| 96 | Water Supply and Sanitary Installation with 50 Users Septic tank |
| 97 | EARTH WORK : |
| 98 | Earth work in excavation by mechanical means ( Hydraulic Excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres |
| 99 | All kinds of soil |
| 100 | Filling available excavated earth (excluding Rock) in trenches, plinth, sided of foundation etc. In layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead up to 50mm and lift up to 1.5m. A) All kinds of soil. |
| 101 | P.C.C WORK : |
| 102 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. |
| 103 | 1:3:6( 1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size) |
| 104 | 1:4:8( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) |
| 105 | FORM WORK: |
| 106 | Centering and shuttering including strutting, propping etc and removal of form for. |
| 107 | (a)Foundation, footing, bases of column etc and mass concrete. |
| 108 | Suspended floors, roofs, landing, balconies and access platform. |
| 109 | RCC WORK: |
| 110 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level excluding cost of centering, shuttering, finishing and reinforcement in (a) 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 111 | Reinforcement for RCC works including straightening, cutting, bending placing and binding all complete upto plinth level. |
| 112 | Thermo-Mechanically Treated bars |
| 113 | Brickworks: |
| 114 | Brick work with 1st class common burnt clay F.P.S ( non modular ) bricks in foundation and plinth in a) Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 115 | Half brick masonry with 1st class common burnt clay F.P.S ( non modular )brick in superstructure above plinth level and upto floor five level. a) Cement mortar 1:3 ( 1 cement : 3 coarse sand ) |
| 116 | Honeycomb brick work 10/11.4 cm thick with 1st class common burnt clay F.P.S (non modular ) brick in superstructure above plinth level and upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand) |
| 117 | Flooring: |
| 118 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate )finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete. A) 40 mm thick with 20 mm nominal size stone aggregate. |
| 119 | 15mm cement plaster 1:3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement on the roughside of single or half brick wall. |
| 120 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 121 | Providing and fixing 1st quality ceramic glazed wall tiles comforming to IS: 15622 ( thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 122 | SANITARY INSTALLATION |
| 123 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan )with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device ( handle lever ) conforming to IS : 7231, with all fittings and fixtures complete, including and making good the walls and floors wherever required : a) W.C pan with ISI marked white solid seat plastic seat and lid. |
| 124 | Providing and fixing wash basin with C.I brackets, 15 mm CP brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 125 | White Vitreous China Flat back wash basin size 450x300 mm with single C.P brass pillar tap. |
| 126 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 127 | Providing and fixing Chlorinated Polyvinyl chloride ( CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes && fittings with one steps CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. |
| 128 | 75 mm dia outer dia pipes |
| 129 | 100 mm dia outer dia pipes |
| 130 | Water Supply |
| 131 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work - Exposed on wall). |
| 132 | 15 mm nominal outer diameter pipes |
| 133 | 20 mm nominal outer diameter pipes |
| 134 | 25 mm nominal outer diameter pipes |
| 135 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (External work ). |
| 136 | 25 mm nominal outer diameter pipes |
| 137 | Providing and fixing bib cock of superior quality |
| 138 | 15 mm nominal bore |
| 139 | Providing and fixing C.P brass stop cock of superior quality. |
| 140 | 15 mm diameter |
| 141 | Providing and fixing gun metal non - return valve of approved quality ( screwed end ). |
| 142 | 25 mm nominal bore |
| 143 | Providing and fixing C.P.brass shower rose with15mm or 20mm inlet |
| 144 | 100 mm diameter |
| 145 | Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. |
| 146 | 2000 litres net capacity storage tanks |
| 147 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 148 | Group A |
| 149 | Group B |
| 150 | Group C |
| 151 | Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 152 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 153 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 154 | 2X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 155 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 156 | Supplying and Drawing (following pair) 0.5 sqmm FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as reqd. |
| 157 | 4 Pair |
| 158 | Supplying and Drawing Co-Axial TV Cable RG-6 grade 0.7mm Solid copper conductor PE insulated shielded with file tinned copper braid and protected in PVC sheath in existing surface / recessed steel/ PVC conduit as reqd |
| 159 | Supplying and Drawing following size of steel conduit along with accessories in surface/recess i/c painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as reqd. |
| 160 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 161 | 5/6 A switch |
| 162 | 15/16 A switch |
| 163 | 3 pin 5/6 A socket outlet |
| 164 | 6 pin 15/16 A socket outlet |
| 165 | Telepone socket outlet |
| 166 | TV antena socket outlet |
| 167 | S/F 25 amp Air-Conditioner power plug point i/c 4 modules metal box on surface or in recess 4- modules plate and cover in front 25 amp modular starter 25 amp modular socket outlet and 25 amp plug i/c connection etc as reqd. |
| 168 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 169 | Supply and fixing modular type blanking plate on existing modular plate and switch ox excluding modular plate as reqd. |
| 170 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.. |
| 171 | 1 or 2 Module (75 mmX75 mm) |
| 172 | 4 Module (125mm X 75mm) |
| 173 | 12 Module (200 mmX150 mm) |
| 174 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/wooden block includingonnectiontc as reqd. |
| 175 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders inexisting cubicle panel board including drilling holes in cubicle panel making connections etc as reqd. |
| 176 | 800 A , 35 KA, 4 Pole MCCB |
| 177 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 178 | 8 way, Double door |
| 179 | 12 way double door |
| 180 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 181 | Single pole |
| 182 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 183 | 43 amps |
| 184 | 63 amps |
| 185 | Supplying, installing, testing and commissioning of surfaceecess mounting vertical type 415V MB distribution board of sheet steel dust protected duly phosphatized and powder painted inclusive of 2 amps tinned copper busbar common neutral link earth bar din bar forunting MCB's detachable gland/knock out plate and with 100 amps 10A MCCB as incomer interconnection between incomer MCCB and bus of followingay (butthout MCB's) as reqd. |
| 186 | 12 Way (8+36) TPN MCB DB Duble door. |
| 187 | Earthing with copper plate 600mm x 600mm x 6mm thick i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd |
| 188 | Extra for using salt and charcoal for G.I or copper plate earth electrode as reqd |
| 189 | S/F 48'' sweep (1200mm) A.C.Ceiling fan complete with down rod canopy 3 (three) blades but without regulator etc as reqd.(Make Bajaj/Usha or similar) |
| 190 | S/F 450mm dia wall mounting fan complete wit all accessories etc as reqd. |
| 191 | S/F 2 tone capacity split type Ar conditioner, ( Diamond, 3 star, 5G 30, G-SC 24 FD 3 WJH) complete with Indo voltage Stabilizer, Automatic 5 KVA (140-280 for 2 ton) |
| 192 | Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton). |
| 193 | Ceiling fitting (Surface) with 15/18 watt LED Lamp. |
| 194 | Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required. |
| 195 | With CFL 12/15 Watts Lamp. |
| 196 | Supplying, installtion of exhaust fan in the existing opening, including making good the damage, connection,testing,commissioning etc as reqd. |
| 197 | 225mm sweep |
| 198 | S/F surface Pendent mounting 9 W led bulb complete with driver i/c connections etc as reqd |
| 199 | Supplying V Cable at site as per specification of engineer in charge. |
| 200 | 16 mm (Two core) MV Cable |
| 201 | Supply and installation of Control Panel 200 amp |
| 202 | Land Development |
| 203 | EARTH WORKS: |
| 204 | Banking excavated earth in layers not exceeding 20 cm. in depth, breaking clods,watering. rolling each layer with Y2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum B tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m. |
| 205 | All Kinds of Soil |
| 206 | External Services |
| 207 | MCCB, MCB & DB’S |
| 208 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 209 | 100 A, 10 kA,TPMCCB |
| 210 | RISING MAINS & BUS TRUNKING |
| 211 | Providing anf Fixing ( Following rating and breaking capacity) MCCB in esisting cubicle panel board including drilling holes in cubicle panel & making connection as reqd. |
| 212 | 125 A, Isc = 25 kA for 1 second |
| 213 | Providing and fixing 125 amp TPN stand ground on load change over switch (Compact design)415/500 V including connectionetc as reqd |
| 214 | S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 200 amp capacity complete with all accessories i/c connection earthing the body etc as reqd |
| 215 | EARTHING |
| 216 | Earthing with copper earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. without charcoal/ coke and salt) as required. |
| 217 | Extra for using salt and charcoal for GI or copper plate earth electrode as reqd |
| 218 | Providing and Fixing 4mm dia copper wire on surface or in recessed for loop earthing as reqd |
| 219 | CHAPTER 7-MV CABLE LAYING |
| 220 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 221 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 222 | Additional Items |
| 223 | 16 Sq.mm flat twin PVC sheathed/weather proof |
| 224 | Staff Quarter |
| 225 | EARTH WORKS: |
| 226 | Earth work in excavation by mechanical means (Hydraulic Excavator ) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 227 | All kinds of soil. |
| 228 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 229 | Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete. |
| 230 | CEMENT CONCRETE WORKS: |
| 231 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All Works upto Plinth Level |
| 232 | 1:4:8(1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 233 | 1:3:6(1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 234 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4( 1 cem : 2 c/and : 4 gr st aggrt 20 mm n/size and down size) finished with a floating coat of neat cement. |
| 235 | REINFORCED CEMENT CONCRETE WORKS: |
| 236 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level : |
| 237 | 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 238 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 239 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
| 240 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 241 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 242 | Thermo-Mechanically Treated bars. |
| 243 | FORM WORKS |
| 244 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 245 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 246 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 247 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 248 | Weather shade, Chajjas, corbels etc., including edges. |
| 249 | Suspended floors, roofs, landings, balconies and access platform. |
| 250 | Stairs, (excluding landings) except spiral-staircases. |
| 251 | BRICK WORKS: |
| 252 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 253 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 254 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 255 | WOOD WORKS: |
| 256 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 257 | Local best quality Uningthou wood |
| 258 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 259 | Local best quality Teak wood 35 mm thick shutters |
| 260 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. |
| 261 | Local best quality Teak wood 35 mm thick |
| 262 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 25 mm dia. |
| 263 | Providing and fixing 25 mm thick shutters for cupboards etc. including ISl marked black enamelled M.S. butt hinges with necessary screws : |
| 264 | Panelled or panelled and glazed shutters Ist class Teak wood |
| 265 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. |
| 266 | With 2nd class teak wood beading 62X19 mm. |
| 267 | Providing and fixing M.S. Grill of required pattern to wooden frame of window etc with M.S. flat at required spacing & frame all round bar with round headed bolt & nuts or by screw. |
| 268 | Fixed to steel windows by welding. |
| 269 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 270 | P/F Brass Tower bolts (barrel type) with screws etc. complete . |
| 271 | 250 X 10mm. |
| 272 | 100x10 mm |
| 273 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 274 | 125 mm |
| 275 | 100mm |
| 276 | Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. |
| 277 | STEEL WORK |
| 278 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 279 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. |
| 280 | Hot finished welded type tubes |
| 281 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 282 | 1.00mm thick with zinc coating not less than 275gm/m2 |
| 283 | FLOORING |
| 284 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.080/0 and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 285 | Size of Tile 600 x 600 mm |
| 286 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of stepts , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. |
| 287 | sizes of tile 600x600 mm |
| 288 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : |
| 289 | Makrana white second quality. |
| 290 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete |
| 291 | Marble tiles (polished) Raj Nagar. 8 mm thick. |
| 292 | FINISHING |
| 293 | 12 mm cement plaster of mix : |
| 294 | 1:4 ( 1 cement : 4 fine sand ) |
| 295 | 15mm cement plaster 1:3 ( 1 cement : 3 Kanhaighat coarse sand ) finished with a floating coat of neat cement of mix: |
| 296 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 297 | New work (two or more coats) over and including priming coat with cement primer:- |
| 298 | Finishing walls with Acrylic smooth exterior paint of required shade : |
| 299 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm). |
| 300 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 301 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 302 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 303 | MISCELLANEOUS |
| 304 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 305 | Water Supply & Sanitary Installation |
| 306 | EARTH WORK : |
| 307 | Earth work in excavation by mechanical means ( Hydraulic Excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres |
| 308 | All kinds of soil |
| 309 | Filling available excavated earth (excluding Rock) in trenches, plinth, sided of foundation etc. In layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead up to 50mm and lift up to 1.5m. A) All kinds of soil. |
| 310 | P.C.C WORK : |
| 311 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. |
| 312 | 1:3:6( 1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size) |
| 313 | 1:4:8( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) |
| 314 | FORM WORK: |
| 315 | Centering and shuttering including strutting, propping etc and removal of form for. |
| 316 | (a)Foundation, footing, bases of column etc and mass concrete. |
| 317 | Suspended floors, roofs, landing, balconies and access platform. |
| 318 | RCC WORK: |
| 319 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level excluding cost of centering, shuttering, finishing and reinforcement in (a) 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 320 | Reinforcement for RCC works including straightening, cutting, bending placing and binding all complete upto plinth level. |
| 321 | Thermo-Mechanically Treated bars |
| 322 | Brickworks: |
| 323 | Brick work with 1st class common burnt clay F.P.S ( non modular ) bricks in foundation and plinth in a) Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 324 | Half brick masonry with 1st class common burnt clay F.P.S ( non modular )brick in superstructure above plinth level and upto floor five level. a) Cement mortar 1:3 ( 1 cement : 3 coarse sand ) |
| 325 | Honeycomb brick work 10/11.4 cm thick with 1st class common burnt clay F.P.S (non modular ) brick in superstructure above plinth level and upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand) |
| 326 | Flooring: |
| 327 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate )finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete. A) 40 mm thick with 20 mm nominal size stone aggregate. |
| 328 | 15mm cement plaster 1:3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement on the roughside of single or half brick wall. |
| 329 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 330 | Providing and fixing 1st quality ceramic glazed wall tiles comforming to IS: 15622 ( thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 331 | SANITARY INSTALLATION |
| 332 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan )with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device ( handle lever ) conforming to IS : 7231, with all fittings and fixtures complete, including and making good the walls and floors wherever required : a) W.C pan with ISI marked white solid seat plastic seat and lid. |
| 333 | Providing and fixing wash basin with C.I brackets, 15 mm CP brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 334 | White Vitreous China Flat back wash basin size 450x300 mm with single C.P brass pillar tap. |
| 335 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 336 | Providing and fixing Chlorinated Polyvinyl chloride ( CPVC ) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes && fittings with one steps CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. |
| 337 | 80 mm dia outer dia pipes |
| 338 | 100 mm dia outer dia pipes |
| 339 | Water Supply |
| 340 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work - Exposed on wall). |
| 341 | 15 mm nominal outer diameter pipes |
| 342 | 20 mm nominal outer diameter pipes |
| 343 | 25 mm nominal outer diameter pipes |
| 344 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (External work ). |
| 345 | 25 mm nominal outer diameter pipes |
| 346 | Providing and fixing bib cock of superior quality |
| 347 | 15 mm nominal bore |
| 348 | Providing and fixing C.P brass stop cock of superior quality. |
| 349 | 15 mm diameter |
| 350 | Providing and fixing gun metal non - return valve of approved quality ( screwed end ). |
| 351 | 25 mm nominal bore |
| 352 | Providing and fixing C.P.brass shower rose with15mm or 20mm inlet |
| 353 | 100 mm diameter |
| 354 | Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. |
| 355 | 2000 litres net capacity storage tanks |
| 356 | ( S.H.:- Providing Internal Electrification & Installation ). |
| 357 | POINT WIRING FR P.V.C. CASING & CAPPING WITH MODULAR TYPE SWITCH:- |
| 358 | Wiring for light point/ Fan point/ Exhaust Fan point/ Call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC cassing and capping witch modular typeswitch , modular plate, suitable GI box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. |
| 359 | Group A |
| 360 | Group B |
| 361 | Group C |
| 362 | POWER PLUG WIREING IN PVC CASING & CAPPING WITH 2X4MM 2 |
| 363 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in cassing and capping etc along with 1 Nos. 4 sq. mm2 FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 364 | CIRCUIT / SUB-MAIN WIREING IN PVC CASING & CAPPING |
| 365 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ presto plast cassing and capping etc as required. |
| 366 | 2 x 1.5 sq. mm +1X1.5mm2 earth wire |
| 367 | 2 x 2.5 sq. mm +1X2.5mm2 earth wire |
| 368 | 2 x 4 sq. mm +1X4mm2 earth wire |
| 369 | 2 x 10 sq. mm +1X4mm2 earth wire |
| 370 | SWITCHES AND ACCESSORIES SUPLY AND FIXING MODULAR TYPE SWITCH AND SOCKET :- |
| 371 | S/F ( following modular type switch / socket ) on the existing modular plate etc. as reqd. |
| 372 | 5/6 amp modular switch |
| 373 | 3pin 5/6 amp modular socket outlet |
| 374 | 15/16 amp modular switch |
| 375 | 6pin 15/16 amp modular socket outlet |
| 376 | S/F 25amp Air-Conditioner power plug point i/c 4 modular metal box on surface or in resses 4-modular plate and cover in fornt 25 amp pulg i/c connection etc. as reqd. |
| 377 | SUPPLYING AND FIXING MODULAR TYPE ELECTRONIC FAN REGULATOR |
| 378 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. |
| 379 | FIXTURE / FITTING |
| 380 | S/F 48\\" sweep (1400mm) A.C.ceilling fan complete with down rod canopy 3 three blades but without regulator etc as reqd.( Make Bajaj/usha) |
| 381 | S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd. |
| 382 | S/F surface mounting luminaries FTL 1x36/40W /LED complete with all accessories i/c connection etc.as reqd.(BJSM 02-236) |
| 383 | METAL CLAD SFU WITH HRC FUSES & MCCB'S |
| 384 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. |
| 385 | 100 Amp TP&N |
| 386 | SWITCH GEAR ( MAIN SWITCH ) CHANGE OVER. |
| 387 | P/F 200 amp. TPN stand ground on load change over switch (Compact deign)415/500Vincluding connection etc. as reqd. |
| 388 | BUS BAR CHAMBER |
| 389 | S/F Bus bar chamber with 4 strips copper bus bar of length 900mm suitable for 400 amp capacities complete with all accessories i/c connection earthing the body etc.as reqd. |
| 390 | S/F 'B' SERIES SP MCB |
| 391 | Single pole. 5 amp to 32 amper rating 230V 'B' series MCB |
| 392 | S/F MCB DB,ISOLATOR |
| 393 | 40/63 amp double pole |
| 394 | MCB DISTRBUTION BOARD / S/F SP MCB DB |
| 395 | S/F ( following way,) single/double pole and neutral,sheet steel MCCB distubution board,240V on surface / recessed complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phospatized and power painted inculding earthing etc as reqed. ( but withoutMCB/RCCB/ISOLATOR). |
| 396 | 12 way double door |
| 397 | E A R T H I N G |
| 398 | S/L 8 SWG copper wire at 0.50 meter below ground level for conductor earth eletrode i/c soldering etc .as reqed. |
| 399 | External Services |
| 400 | EARTH WORKS: |
| 401 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering --All work upto plinth level: |
| 402 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 403 | Providing and laying cement concrete in kerbs,steps,and the like at or near ground level excluding the cost of centering and shuttering and finishing 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 404 | Centering and shuttering including strutting, propping etc, and removal of form for: |
| 405 | Foundation, footings, bases of columns, etc. for mass concrete. |
| 406 | Providing and fixing G.I pipes complete with G.I fittings and clamps including trenching and refilling etc. |
| 407 | 80 mm nominal outer dia Pipes |
| 408 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete : |
| 409 | 50 to 80 mm nominal bore |
| 410 | Cost of 8m long steel tubular pole (410-Sp-14) |
| 411 | Suspension hungs for AB Cable with bare messengers wire complete with eye hook as per ( construction Standard) |
| 412 | M.S cross arm (75x40) mm 510mm long |
| 413 | AB Cable (3x95+1x70) sq.mm |
| 414 | Land Development |
| 415 | EARTH WORKS: |
| 416 | Banking excavated earth in layers not exceeding 20 cm. in depth, breaking clods,watering. rolling each layer with Y2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum B tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m. |
| 417 | All Kinds of Soil Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender