Tender For Annual Maintenance Of The Colony, Including Civil Repair Works, Water Supply And Maintenance, Pest Control And Fogging At Gondegaon Residential Colony Under Gondegaon Sub Area. E-
Tender Value
1.72 Crore
Estimated cost
Bid Submission
13 Aug 2026
14 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Of The Colony, Including Civil Repair Works, Water Supply And Maintenance, Pest Control And Fogging At Gondegaon Residential Colony Under Gondegaon Sub Area. E-
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil (Note: No machinery access, manual excavation only) |
| 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Complete. 40 mm thick with 20 mm nominal size stone aggregate s |
| 5 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 8 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 9 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 10 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 11 | Neat cement punning. |
| 12 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 14 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm |
| 15 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 16 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 17 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 18 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 19 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm |
| 20 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 21 | Grading roof for water proofing treatment with 4.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 22 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. Old work (one or more coats) |
| 24 | White washing with lime to give an even shade : New work (three or more coats) |
| 25 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 26 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
| 28 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 29 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 30 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 25 mm thick |
| 31 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled ur panelled and glazed shutters 25 mm to 40 mm thick: Kiln seasoned and chemically treated hollock wood |
| 32 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm |
| 33 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm |
| 34 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm |
| 35 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 37 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 38 | Supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre per sqm. |
| 39 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 41 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 42 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 44 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 45 | Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) |
| 46 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 47 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 48 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth |
| 49 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth |
| 50 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement - PN -1.6 100mm dia. |
| 51 | Providing & supplying Brass full way valve with C.I. wheel (screwed end) 50 mm dia including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 52 | Providing & supplying Brass full way valve with C.I. wheel (screwed end) 80 mm dia including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 53 | Providing & supplying C.I. sluice valve (with caps) class II : 100 mm dia including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 54 | Providing & supplying C.I. sluice valve (with caps) class II : 150 mm dia including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 55 | Providing & supplying C.I. sluice valve (with caps) class II : 200 mm dia including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 56 | Providing & supplying White cement based putty including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 57 | Providing & supplying Bolts and nuts up to 300 mm in length including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 58 | Providing & supplying Bleaching powder including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 59 | Providing & supplying 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 60 | Providing & supplying Polyethylene water storage tank with cover and suitable locking arrangement including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 61 | Providing & supplying White plastic seat (solid) with lid C.P. brass hinges and rubber buffers including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 62 | Providing & supplying Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 63 | Providing & supplying Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 64 | Providing & supplying White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 65 | Providing & supplying 15 mm PTMT bib cock including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 66 | Providing & supplying 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 67 | Providing & supplying P.T.M.T. extension nipple 15 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 68 | Providing & supplying P.T.M.T. extension nipple 20 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 69 | Providing & supplying P.T.M.T. extension nipple 25 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 70 | Providing & supplying Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia. SS pipe including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 71 | Providing & supplying Reducing Elbow 90° for 28.58 mm X 15.88 mm outer dia SS pipe including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 72 | Providing & supplying Reducing Elbow 90° for 28.58 mm X 22.22 mm outer dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 73 | Providing & supplying 20 mm dia Gunmetal gate valve with wheel including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 74 | Providing & supplying Brass full way valve with C.I. wheel (screwed end) 25 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 75 | Providing & supplying H.P. or L.P. ball valve with polythene floats: 15 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 76 | Providing & supplying H.P. or L.P. ball valve with polythene floats: 20 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 77 | Providing & supplying H.P. or L.P. ball valve with polythene floats: 25 mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 78 | Providing & supplying PTMT Pillar cock (fancy) 15 mm foam flow including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 79 | Providing & supplying Two Way bib tap with flange including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 80 | Providing & supplying P.V.C.Socket 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 81 | Providing & supplying P.V.C.Socket 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 82 | Providing & supplying P.V.C.Socket 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 83 | Providing & supplying P.V.C.Socket 32mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 84 | Providing & supplying P.V.C.Socket 40mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 85 | Providing & supplying Elbow 90 Degree for 15mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 86 | Providing & supplying Elbow 90 Degree for 20mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 87 | Providing & supplying Elbow 90 Degree for 25mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 88 | Providing & supplying Elbow 90 Degree for 32mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 89 | Providing & supplying Elbow 90 Degree for 40mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 90 | Providing & supplying Tee for 32mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 91 | Providing & supplying Male adapter (Brass Threads) for 15mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 92 | Providing & supplying Male adapter (Brass Threads) for 20mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 93 | Providing & supplying Male adapter (Brass Threads) for 25mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 94 | Providing & supplying Male adapter (Brass Threads) for 32mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 95 | Providing & supplying Male adapter (Brass Threads) for 40mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 96 | Providing & supplying Female adapter (Brass Threads) for 15mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 97 | Providing & supplying Female adapter (Brass Threads) for 20mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 98 | Providing & supplying Female adapter (Brass Threads) for 25mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 99 | Providing & supplying Female adapter (Brass Threads) for 32mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 100 | Providing & supplying Female adapter (Brass Threads) for 40mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 101 | Providing & supplying Union for 15mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 102 | Providing & supplying Union for 20mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 103 | Providing & supplying Union for 25mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 104 | Providing & supplying Union for 32mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 105 | Providing & supplying Union for 40mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 106 | Providing & supplying uPVC pipe 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 107 | Providing & supplying uPVC pipe 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 108 | Providing & supplying uPVC pipe 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 109 | Providing & supplying uPVC pipe 40mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 110 | Providing & supplying End cap for 15mm dia. (PVC) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 111 | Providing & supplying S.S. pillar cock including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 112 | Providing & supplying S.S. bib cock including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 113 | Providing & supplying S.S. stop cock including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 114 | Providing & supplying bush 1\\"x3/4\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 115 | Providing & supplying bush 1\\"x1/2\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 116 | Providing & supplying bush 3/4\\"x1/2\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 117 | Providing & supplying uPVC 1 1/4\\"x1\\" Bush including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 118 | Providing & supplying Nail/pipe clamps pvc 1\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 119 | Providing & supplying Nail/pipe clamps pvc 3/4\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 120 | Providing & supplying Nail/pipe clamps pvc 1/2\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 121 | Providing & supplying CPVC brass elbow 3/4\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 122 | Providing & supplying uPVC Brass Elbow 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 123 | Providing & supplying uPVC Brass Elbow 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 124 | Providing & supplying uPVC Brass Elbow 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 125 | Providing & supplying G.I. Socket 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 126 | Providing & supplying G.I. Socket 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 127 | Providing & supplying G.I. Socket 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 128 | Providing & supplying G.I. Elbow 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 129 | Providing & supplying G.I. Elbow 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 130 | Providing & supplying G.I. Elbow 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 131 | Providing & supplying G.I. Tee 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 132 | Providing & supplying G.I. Tee 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 133 | Providing & supplying G.I. Tee 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 134 | Providing & supplying G.I. 3/4\\" x 1/2\\" reducer including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 135 | Providing & supplying G.I. 1\\" x 1/2\\" reducer including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 136 | Providing & supplying G.I. 1\\" x 3/4\\" reducer including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 137 | Providing & supplying G.I. 1\\" x 2\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 138 | Providing & supplying G.I. 1\\" x 3\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 139 | Providing & supplying G.I. 1\\" x 6\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 140 | Providing & supplying G.I. 1\\" x 12\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 141 | Providing & supplying G.I. 1/2\\" x 3\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 142 | Providing & supplying G.I. 1/2\\" x 6\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 143 | Providing & supplying G.I. 1/2\\" x 9\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 144 | Providing & supplying G.I. 1/2\\" x 12\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 145 | Providing & supplying G.I. 3/4\\" x 3\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 146 | Providing & supplying G.I. 3/4\\" x 6\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 147 | Providing & supplying G.I. 3/4\\" x 12\\" nipple including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 148 | Providing & supplying G.I. valve 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 149 | Providing & supplying G.I. Dummy Plug 15mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 150 | Providing & supplying G.I. Dummy Plug 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 151 | Providing & supplying G.I. Dummy Plug 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 152 | Providing & supplying Short body spindal SS Bib Cock 15mm including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 153 | Providing & supplying Long body spindal SS Bib Cock 15mm including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 154 | Providing & supplying uPVC Tee for 15mm dia. (brass threaded) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 155 | Providing & supplying uPVC Tee for 20mm dia. (brass threaded) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 156 | Providing & supplying uPVC Tee for 25mm dia. (brass threaded) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 157 | Providing & supplying uPVC Tank nipple 20mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 158 | Providing & supplying uPVC Tank nipple 25mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 159 | Providing & supplying uPVC Tank nipple 32mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 160 | Providing & supplying uPVC Tank nipple 40mm dia. including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 161 | Providing & supplying uPVC Reducer 1\\"x3/4\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 162 | Providing & supplying uPVC Reducer 1\\"x1/2\\" including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 163 | Providing & supplying uPVC 1 1/4\\"x1\\" Reducer including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 164 | Providing & supplying uPVC 1 1/4\\"x1\\" Bush including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 165 | Providing & supplying uPVC 1 1/2\\"x1\\" Reducer including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 166 | Providing & supplying HDPE Tank Cover (for 1000 ltr tank) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 167 | Providing & supplying Garden water pipe 20mm Dia of 30m length bundle including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 168 | Providing & supplying Solvent for pipe jointing 200ml including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 169 | Providing & supplying Teflon Tape (pack of 10 pieces) including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 170 | Providing & supplying M-seal white including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 171 | Providing & supplying Hack saw blade including loading, unloading and transportation with contractor's profit as per requisite quality, specification and direction of Engineer In-charge. |
| 172 | Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C. supply of 15 kW/20 HP with discharge 2000/600 lpm for head of 27/80 m and 100 mm suction/100 mm delivery pipe on provided CC foundation as per specification no. WP-CGP. |
| 173 | Dismantling the existing submersible pump with GI pipeline upto 10m depth. Note: Select a suitable water pump for underground/overhead water tank so the tank can fill within 3 Hrs. |
| 174 | For additional depth of each 3 m or part thereof add Rs.50/- per 3 m, in the rates |
| 175 | Rewinding of submersible pump motor in borewell of all types and makes above 5 HP up to 25 HP with coated copper wire conforming to IS 13730: 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year. |
| 176 | Rewinding of electric motor above 15 HP upto 20 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 177 | Cleaning of all types of roof including removal of dry leaves, weeding and cleaning drain holes, brooming etc. all complete with tools and tackles and stacking the garbage at specified place as per instruction of Engineer in charge.Lead of 50 mtrs. |
| 178 | Clearing wild grass / shrubs / vegetation / bushes up to 10 cm girth by engaging brush cutter machine and removal of rubbish upto a distance of 50 mtrs outside the periphery of the cleared area. The cost is inclusive of hiring charges of machine POL operator, cutting tool and grass should be cut nearest to the ground level. Surface area wherever bush cutter can not be used, should also be cleared by engaging manpower etc. all complete as per instruction of Engineer in charge.(4 times in a year) |
| 179 | Transportation of rubbish / branches of cut trees by engaging tractor - trolly and unloading at designated place clearing the area as per instruction of the Engineer in charge with lead upto 2.00 KM. |
| 180 | Spraying of chemical - Ammonium salt of Glyphostae 71% SG to stop the growth of unwanted weeds and Gazer grass by taking appropiate safety measures as per instruction of Engineer-in-charge. (4 times in a year) |
| 181 | Providing and spreading of Bleaching powder to prevent growth of algae, larwa, bacteria, bad smell in colony premises including all material such as bleaching powder 25Kg weight of each bag including hand gloves for workers and taking all safety precautions transportation of material all complete as per instruction of Engineer In Charge (Frequency - Weekly) |
| 182 | General disinfection/ Pest control with new generation odurless, colourless insecticides which should be safe for human being and effective for all type of house hold insects like mosquitos, house flies, etc. using Residual spray of Deltamethrin 2.5% SC Flow (K- Othrine or approved equivalent) Insecticides should be sprayed uniformly over the surfaces of walls, ceiling, etc. Frequency - Once in 3 months |
| 183 | General disinfection/ Pest control with new generation odurless, colourless insecticides which should be safe for human being and effective for all type of house hold insects like mosquitos, house flies, etc. using Residual spray of Cyfluthrin 5% EW (Solfac EW 050 or approved equivalent) Insecticides should be sprayed uniformly over the surfaces of walls, ceiling, etc. Frequency - Once in 3 months |
| 184 | Thermal Fogging - Using insecticide Deltametrhrin 1.25% ULV (KingFog or approved equivalent ) mixed with Diesel in the ratio of 1:199, for outdoor operation of colony, etc. |
| 185 | Anti-Larva Treatment by using Diflubenzuron 25% WP (Bi-Larv or approved equivalent) solution to be spreaded as per instruction of EIC. (Frequency - Weekly) |
| 186 | Day to day attending carpentry job and other carpenter related works including repairing of aluminium windows and sections as per complaints and direction of Engineer In Charge (Twice in a week) (1 skilled manpower/ carpenter & 1 unskilled manpower/ helper) If manpower is not deployed at site/ not found at site by EIC or his authorized representative as per instructions of Engineer-in-charge, then deduction will be made as per wages of the employed man. (Applicable minimum wages plus 15% Contractors profit & overhead charges) |
| 187 | Lowering of required submersible pump at suitable depth including all necessary arrangements, cables, labours, etc. as per instruction of I/C. Complete. 1 no. skilled and 4 no. unskilled labours required. If manpower is not deployed at site/ not found at site by EIC or his authorized representative as per instructions of Engineer-in-charge, then deduction will be made as per wages of the employed man. (Applicable minimum wages plus 15% Contractors profit & overhead charges) |
| 188 | Day to day operation of valve for smoothly water supply of drinking water and daily maintenance of water supply complaints in Gondegaon residential colony. As per instruction of Engg. I/c. 2 No. unskilled manpower/ valve man For 1st & 2nd shift. If manpower is not deployed at site/ not found at site by EIC or his authorized representative as per instructions of Engineer-in-charge, then deduction will be made as per wages of the employed man. (Applicable minimum wages plus 15% Contractors profit & overhead charges) |
| 189 | Day to day operation and maintenance of all the pumps located in colony premises for smoothly water supply of drinking water in Gondegaon residential colony. As per instruction of Engg. I/c. 2 No. unskilled manpower/ pump operatorn For 1st & 2nd shift. If manpower is not deployed at site/ not found at site by EIC or his authorized representative as per instructions of Engineer-in-charge, then deduction will be made as per wages of the employed man. (Applicable minimum wages plus 15% Contractors profit & overhead charges) |
| 190 | Day to day maintenance of water supply complaints with fitter and fitter helper as per quarter complaints including plumbing replairing works, water supply pipe leakage, excavate earth / trenching & refill the same etc. for smooth water supply in Gondegaon residential colony. As per instruction of Engg. I/c. 1 No. skilled man power/ plumber & 1 No. unskilled manpower/ fitter helper is required daily. If manpower is not deployed at site/ not found at site by EIC or his authorized representative as per instructions of Engineer-in-charge, then deduction will be made as per wages of the employed man. (Applicable minimum wages plus 15% Contractors profit & overhead charges) |
| 191 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender