Tender For special Repair To Bldg No T-34, T-62, T-16-19C & T-25-30C At Certain Location Of Saa Under Ge(S) Tezpur
Tender Value
43.69 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
18 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-34, T-62, T-16-19C & T-25-30C At Certain Location Of Saa Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement/CGI corrugated semi corrugated etc sheets in roof covering. Complete all as specified and directed. |
| 2 | S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile stenght of 550 MPA as in roof covering /cladding to wall, with or without including end creep at sloping end of creep length 200 mm to 250 mm etc fixed with self tapping screws as complete all as specified. and as directed by Engineer in Charge. Note:- Creep length shall be measured and paid in same item |
| 3 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | Dismanting timber scantling 40 Sqcm and over in section in any position in framed work or unframed work Complete all as specified and directed. |
| 5 | M&L 2nd class HW in scantling fixed clean swan in framed work Complete all as specified and directed. |
| 6 | Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters Complete all as specified and directed. |
| 7 | S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 2 mm dia double GI J type adjustable suspendor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress Complete all as specified and directed. |
| 8 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing Complete all as specified and directed. |
| 9 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) Complete all as specified and directed. |
| 10 | M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm Complete all as specified and directed. |
| 11 | M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair Complete all as specified and directed. |
| 12 | M&L two coat of white wash on old wall surfaces of walls and cornices including Complete removal of existing treatment complete all as specified and directed |
| 13 | M&L Preparing new Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. |
| 14 | M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint. Complete all as specified and directed. |
| 15 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water Complete all as specified and directed. |
| 16 | M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work/lathing finished even and fair without using extra cement Complete all as specified and directed. |
| 17 | M & L, 10mm thick rendering in C.M. (1:6) on brick work/lathing finished even and smooth without using extra cement .Complete all as specified and directed. |
| 18 | M&L for Newly plastered surfaces of external wall with applying thin layer of wall care putty to get smooth surface and applying two coats of apex /weather coat paints over a coats of damp shield primer. complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&L for complete removal of existing treatment of external walls along with preparation of wall surface including 1mm thick exterior wall care putty and applying two coat of apex/ weather coat water proofing paints over a coats of damp shield primer coat complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M & L Old wall surface including properly preparation/removal of existing paint surface and filling the cracks with exterior wall care putty with water proof primer and applying one coat of weather coat water proofing paints including single/Double/Triple storied bldgs complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Demolition of brickwork or stone/boulder masonry, built in cement mortar Complete all as specified and directed. |
| 22 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.Complete all as specified and directed. |
| 23 | Demolition of reinforcement cement concrete in roofs, floors(other than ground floor),beams, staircases, landing, chajjas,slabs, precast slabs and similar suspended work complete all as specified and directed. |
| 24 | M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 25 | S & F Mild steel bars 08mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as specified and directed. |
| 26 | M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm complete all as specified and directed. |
| 27 | Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm completecomplete all as specified and directed. |
| 28 | M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath ,surface drains, soucer drains etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler complete all as specified and directed. |
| 29 | M & L for 50 mm PCC 1:3:6 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base complete all as specified and directed |
| 30 | M&L Applying two coats of acrylic emulsion distemper to newly plastered over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly plastered wall complete all as specified and directed. |
| 31 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Acrylic Emulsion Distemper over a coat of primer and applied over 1 mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 32 | M & L, 15 mm thick rendering in C.M. (1:3) on brick work, inside and outside of manholes, finished even and smooth without using extra cement .Complete all as specified and directed. |
| 33 | Cutting into existing manhole for connection new drain making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finish and reforming benching as required for 150mm dia.Complete all as specified and directed. |
| 34 | M/L PCC 1:3:6 type C1 20mm grade aggregate as in coping, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed or similar work Complete all as specified and directed. |
| 35 | M/L PCC 1:2:4 type B0 12.5 mm graded aggregate as in sub base,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, coping or similar work Complete all as specified and directed. |
| 36 | M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint complete all as specefied and directed. |
| 37 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.Complete all as specified and directed.Complete all as specified and directed. |
| 38 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 39 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 40 | S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in epoxy grout to match over 10 mm screed bed in Cement mortar (1:4) complete all as specified and directed. |
| 41 | Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick creed bed in cement mortar (1:4) complete all as specified and as directed |
| 42 | M & L Ceramic tiles of light Shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick creed bed in cement mortar (1:4) complete all as specified and as directed |
| 43 | M & L Ceramic tiles of light Shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick creed bed in cement mortar (1:4) complete all as specified and as directed |
| 44 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc Complete all as specified and directed. |
| 45 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and directed. |
| 46 | Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and directed. |
| 47 | S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction.Complete all as specified and directed. |
| 48 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed. |
| 49 | S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter(minimum three panel) open rebated and prepared to receive glass, gauze etc edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as complete all as specified and directed |
| 50 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 51 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 52 | S&F Stainless steel butt hinges 100 mm long complete all as specified and directed. |
| 53 | S&F 100mm Butt hinges medium weight cold rolled mild steel Complete all as specified and directed. |
| 54 | S&F MS 300 mm ordinary rat tail rod pattern spring including roller and roller plate, fixed to steel/wooden door Complete all as specified and directed. |
| 55 | S&F Aluminium anodised sliding door bolts of size 250 mm long and fixed with screws.(ISI marked) Complete all as specified and directed. |
| 56 | S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed. |
| 57 | S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 58 | S&F powder coated aluminium frame(minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 59 | S&F powder coated aluminium(Thickness or powder coating not less than 50 micron). window and ventilator shutters, sliding type , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangment etc Complete all as specified and directed. |
| 60 | S & F PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing Complete all as specified and directed. |
| 61 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing Complete all as specified and directed. |
| 62 | M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 13 sqcm & n exe 25 sqcm fixed with nails including dismantling complete all as specified and directed |
| 63 | M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails including dismantling complete all as specified and directed |
| 64 | S & F Wire netting(bird mesh) of galvanised steel wire 0.71 mm dia 12 mm mesh size fixed with tinned tacks of wire staples complete all as specified and directed |
| 65 | M & L preperation of new untreated wooden Surfaces plain or moulded, two coats of synthetic enamal paint over a coat of primer n exc 10cm width or girth when unconnected with other painting or when painted in a different tint Complete all as specified and directed. |
| 66 | S& F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares in each pane in squares.Complete all as specified and directed. |
| 67 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 68 | S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-290 Gde -E complete all as specified and directed |
| 69 | Supply & fix in repair 20 to 25 mm dia stainless steel curtain rod including two Nos of socket and end bracket complete for doors/window opening complete all as specified and directed. |
| 70 | M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed. |
| 71 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border with 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed. |
| 72 | S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe taking down Complete all as specified and directed. |
| 73 | S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe taking down Complete all as specified and directed. |
| 74 | S&F in repair tubular Towel rail chromium plated 600mm long 20 mm dia D type complete all as specified and as directed. |
| 75 | S&F in repairs Soap dish Chromium plated , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 76 | Supply and fix,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHB/Sink complete all as specified and directed. |
| 77 | M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent Complete all as specified and directed. |
| 78 | Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 79 | Supply and fix, as in repairs, grating round 100/75 mm dia size of stainless steel complete all as specified and directed. |
| 80 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position Complete all as specified and directed. |
| 81 | S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and as directed. |
| 82 | S& F for laying 15mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors including taking down all complete all as specified and directed |
| 83 | S&F for laying 20mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed |
| 84 | S&F in repairs 15mm dia stop valve fancy (not less than 400 gm) type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 85 | S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 86 | S & F in repairs flush pipe of PVC 32 mm dia ,for low level flushing cistern to squatt pattern closet including all joints and making good to floor. Complete all as specified and directed. |
| 87 | Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed. (ISI marked) |
| 88 | Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern) but including seat cover white closed type and flush pipe complete all as specified and directed |
| 89 | Supply and fix, 15 mm bore bib taps(not less than 400 gm), cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 90 | Supply and fix 15 mm bore piller tap(not less than 575 gm), fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 91 | Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches. Complete all as specified and directed. |
| 92 | Supply and fix, 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 93 | Fixing only , 110 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls complete all as sepcified and directed |
| 94 | Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 95 | Fixing, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls complete all as sepcified and directed |
| 96 | S&F for PVC (SWR) with access door bend 110mm dia. Complete all as specified and directed. |
| 97 | S&F for PVC (SWR) with access door bend 75 mm dia. Complete all as specified and directed. |
| 98 | S&F in repair PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.Complete all as specified and directed. |
| 99 | S&F in repair PVC (SWR) junction single (single 'T') equal or unequal 110mm bore.Complete all as specified and directed. |
| 100 | M&L writing letters or figures (Block, roman, itallic or indian) n.exc. 30cm high.Complete all as specified and directed. |
| 101 | M&L writing stops, commas, short lines, dashes, hyphens, brackets etc.Complete all as specified and directed. |
| 102 | S&F, as in repair, vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets and fixing bolt in wall, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 103 | Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. |
| 104 | S&F Vitreous China White Urinal, flat back of size 465x355x265, complete including providing and fixing plugs, bedding urinal against Wall in Cement Mortar 1:2, securing urinal to plugs, grating with and including 60mm long brass screws, pointing around urinal back in cement f , flush pipe, including PTMT Urinal spreader any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc complete all as specified and as directed. |
| 105 | Dismantling Structural steel work includings door, gates, etc and similar works complete all as specified directed |
| 106 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 290 (Gde E-165 ) complete all as specified and directed. |
| 107 | M&L PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete Complete all as specified and directed. |
| 108 | Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc Complete all as specified and directed. |
| 109 | Taking down main switches and DBs of any type and make including wooden board / junction box.Complete all as specified and directed. |
| 110 | Material and labour for point Wiring with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded FRLSH Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly and CI/pressed steel terminal box with 3.00 mm thick laminated sheet cover fixed on Wall for one light point controlled by one switch complete all as specified and as directed. |
| 111 | All as per item No. 110 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. . |
| 112 | All as per item No. 110 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. |
| 113 | All as per item No. 110 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and as directed. . |
| 114 | M&L for switch piano (flush button type) single pole, one way, 5 Amps. Complete all as specified and directed. |
| 115 | M&L for switch socket out let 2 in one, 5 Amps, 240 Volts flush type, Complete all as specified and directed. |
| 116 | M&L for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal. Complete all as specified and directed. |
| 117 | S&F ceiling rose surface backelite three terminals. Complete all as specified and directed. |
| 118 | Supply and fix in repairs fan regulator electronic, step type Complete all as specified and directed. |
| 119 | Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection.Complete all as specified and directed. |
| 120 | All as item no 120 above but LED batten 9 watt 2 ft long Complete all as specified and directed. |
| 121 | S & F Lamp holder insulated body PVC/polycarbonate with back plate and 7 W LED bulb suitable for batten fitting complete all as specified and directed |
| 122 | Supply Recess mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, complete all as specified and as directed. |
| 123 | S&F on wall security light luminaire for 1x 30 w LED with deep drawn housing with 25 mm bore GI Light grade 1.00 M long street light bracket complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor Complete all as specified and directed. |
| 124 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed. |
| 125 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed |
| 126 | S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed |
| 127 | S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed |
| 128 | S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed |
| 129 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook complete all as specified and directed |
| 130 | S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified and directed |
| 131 | M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 132 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 133 | Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core. Complete all as specified and directed.Note: 1. Excavation and earth work will be measured and paid seperately. |
| 134 | Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed. |
| 135 | M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 136 | M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed. Note : punned thickness will only be measured for payment purpose. |
| 137 | Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed. |
| 138 | Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engr-in-Charge. |
| 139 | Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 140 | Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I including all its accessories complete all specified and directed. |
| 141 | Taking up GI water tubing 25 mm bore from trenches / floor including all fittings, segregated and stacking the pipe complete all as specified and directed. |
| 142 | Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. |
| 143 | Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 144 | Supply and fix Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 145 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender