Tender For Certain Repair To Or Md Accn Of Map Ph-I At Tarapore Enclave & Map Ph-Ii At Manoj Pandey Enclave Area Under Age B/R-Ii At Nams.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
9 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Or Md Accn Of Map Ph-I At Tarapore Enclave & Map Ph-Ii At Manoj Pandey Enclave Area Under Age B/R-Ii At Nams.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | Revised BOQ | BOQ | 17-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishesincl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 2 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 3 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick verticle tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles includig rendering 10mm thick in cement mortar (1:4) ,incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 4 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 06 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 5 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 6 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 7 | M&L 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in leveling cource in roof finishes even and smooth with using extra cement complete all as specified as directed. |
| 8 | Demolition of cement concrete (un-reinforced) in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 100 mtrs where directed complete all as specified and directed. |
| 9 | S&F, in repairs, 20 mm thick, PVC sheet one side prelaminated of approved texture (\\"Celuca Ply of Rajshree make or equivalent in as approved by GE) as in Kitchen cabinet complete all as specified and directed. (Note:- Each member i.e. shelf, partition & shutter of kitchen cabinet shall be measured and paid separately) complete all as specified and directed. |
| 10 | Supplying, Hoisting and fixing in repairs 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) & fixing arrangement for inlet/outlet/over flow and vent pipe of standard size including taking down old water storage tank all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 11 | Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed. |
| 12 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 13 | M&L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding, haunching, sub base floor, even and smooth without using extra cement for further treatment complete all as pecified and directed. |
| 14 | M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) applied on primed surface by forced application of heat and roller, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed. |
| 15 | M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:3) over 25 mm thick screed bed in cement morter 1:4 and flush pointing as work proceed complete all as specified and directed. |
| 16 | All as per above Ser Item No 15, but except bricks tiles complete all as specified and directed. |
| 17 | Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m. complete all as spd and as directed. |
| 18 | M&L for providing 20mm thick bedding layer of cement morter (1:3) finished even and smooth without using extra cement and mixed with water proofing compound as per manufacturer's instruction all as specified and as directed.Note :- Supply only Water proofing compound shall be measured and paid separately. |
| 19 | M&L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution : Water) complete all as spd and as directed. Note: Every each coat gap between 6 hrs) complete all as specified and directed. |
| 20 | Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed. |
| 21 | S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed. |
| 22 | S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl taking down old pipe complete all as specified and directed. |
| 23 | S&F, in repair, central hole basin mixer with extended spout 300 mm long braided connection pipe (without popup) for iron pipe or for unions and fixed to 15mm bore pipe complete all as specified and directed. |
| 24 | Supply & fix in repair, 15 mm bore single lever Sink mixer complete all as specified and directed. |
| 25 | S&F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed. |
| 26 | S&F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed. |
| 27 | S&F in repairs, stop valves, concealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed for 15mm bore of pipe. |
| 28 | S&F in repair, overhead shower 150mm x 150mm square shape single flow (ABS body chrome plated with gray face plate ) incl shower arm 190mm long with rubit cleaning system complete all as spd and directed. |
| 29 | S&F, in repair Health Faucet/hand shower with 8mm dia 1mtr long easy flexible tube with chrome finish & wall hook complete all as spd and directed. |
| 30 | S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed. |
| 31 | S&F in repair Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified. |
| 32 | S&F in repair, brass chromium plated single lever wall mixer 3-in-1 system with provision of both over head shower with 115 mm long bend pipe connecting legs and wall flange (wihout head shower) complete all as specified and directed. |
| 33 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed |
| 34 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and onnecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm sinks etc complete all as directed |
| 35 | S&F in repair stainless steel kitchen plate rack size 750mm X750mmx250mm deep made of stainless steel ,weight not less than 7.5 kg with folded edges glossy finish complete all as specified and directed. |
| 36 | S&F in repair, Vitreous China Wash Hand Basin, white, flat back, size 550 x 400 mm including brass coupling, mild steel brackets fixed to wall with pedestal etc. complete all as specified and directed. |
| 37 | S&F in repair, Viterous China wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device complete all as specified and directed. |
| 38 | S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as spd and directed. |
| 39 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed. |
| 40 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m each complete all as specified and directed. |
| 41 | S&F, 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 42 | Material and labour for 30 mm thick factory made solid (Wood polymer composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including S.S wire mesh shall be fixed l zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufactures instructions complete all as specified and directed. |
| 43 | S&F made 35mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed. |
| 44 | S&F factory made solid PVC moulded door shutter with wood free solid board, 28 to 30 mm thick (stiles) with 2, 4 or 6 rised panel design with 5mm thick 3D wood laminated moulded PVC sheet Polyurethane painted on the front and back face with with 19 guage thickness usiing MS square tuning supplying and fixing of 19 mm x 19 mm frame structure including taking down of old shutter and making good complete all as specified and directed. complete all as specified & directed. |
| 45 | M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 46 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed. |
| 47 | S&F PVC double door frame size 50mm x95mm made out of 5mm single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS tube complete all as specified and directed. |
| 48 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed |
| 49 | S&F, stainless steel butt hinges, of size 100 mm complete all as specified and directed. |
| 50 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 51 | S&F 300mm mild steel ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed. |
| 52 | S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed. |
| 53 | S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 54 | S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 55 | S&F in repair, 25mm dia, 1mm wall thickness stainless steel, fancy type,decorative curtain rod with decorative ball type brackets ( As per sample) fixed with wooden gutties complete all as specified and directed. |
| 56 | Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast and synthetic enamel paint etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf(g) 10 mm square guard bar, 10 cm centre to centre.(h) 25x4 mm flat iron all around for joint of both frame.(j) One coat of Red oxide primer to MS window and guard bar.Note : complete all as specified and directed by Engineer-in-charge. |
| 57 | S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed. |
| 58 | S&F in repair for 4mm thick, sheet glass ordinary quality and glazing with rubber beading in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed. |
| 59 | S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified and directed. |
| 60 | S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 61 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed. |
| 62 | M&L for 16-18mm thick black granite stone (of any type) machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture or pigment to match the shade of stone in window cills, jams,cooking platform pillars etc.laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding and rubbing and polishing complete all as specified and directed. |
| 63 | M&L for marble or any shade shade of thickness 16-18 mm thick in slab laid over 15mm thick screed bed in cement mortar 1:6 as in floor, steps, riser & treads and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises and rounding to edges of stone slabs one edge such as in counter type WHB platform etc. to the entire satsfaction of Engineer-in-Charge.. etc complete all as specified and directed. |
| 64 | S&F in repair, 600mm x 450mm plain edge mirror of selected quality glass not less than 5 mm thick, mounted on wall fixed with stainless steel stud any size complete all as specified and directed. |
| 65 | Supply and Fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 66 | Supply in repair PVC waste pipe 32mm bore of size 750mm long complete all as specified and directed. |
| 67 | S&F, in repair chromium plated tubular towel rail 20mm dia 600mm long Complete all as specified and directed.. |
| 68 | S&F in repair continuous (Piano) Hinges mild steel,bright finish or electro galvanised width of flap (when open) 30 mm complete all as specified and directed. |
| 69 | S&F in repair satinless steel magnetic catcher complete all as specified and directed. |
| 70 | S&F in repair Door seal 4mm wide with Fibre Brush and metalic body complete. complete all as specified and directed. |
| 71 | S&F in repair 75 mm waste fittings, brass chromium plated for sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 72 | S&F in repair 110 mm, waste fittings, brass chromium plated for sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 73 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces on external walls , finished even and smooth without using extra cement incl taking down plaster of walls scrubbing down with water and dispose off debries complete all as specified and directed |
| 74 | M&L for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces on internal walls , finished even and smooth without using extra cement incl taking down plaster of walls scrubbing down with water and dispose off debries, complete all as specified and directed |
| 75 | M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces of Ceiling & finished even and smooth without using extra cement incl taking down old plaster scrubbing down with water and dispose off debries, complete all as specified and directed Please Enable Macros to View BoQ information |
| 76 | M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces of Ceiling & finished even and smooth without using extra cement incl taking down old plaster scrubbing down with water and dispose off debries, complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender