Tender For Repairs To Drain, Culvert, Footpaths And Fencings, Etc And Certain Misc Works Inside Technical Area In Drdl ,Asl And Dsc Complex Inside Drdl C Us Under Age B/R-I, Kanchanbagh, Hyderabad.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Drain, Culvert, Footpaths And Fencings, Etc And Certain Misc Works Inside Technical Area In Drdl ,Asl And Dsc Complex Inside Drdl C Us Under Age B/R-I, Kanchanbagh, Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting of bushes, plants,shurbs n exc 30 cm girth incl all vegetation etc and cleaning complete all as specified and directed by Engineer-in-Charge. |
| 2 | Surface excavation n. exc 30 cm deep and averaging 15 cm deep in hard/dense soil and getting out, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Excavation in post holes ( or similar holes) each n.exc 0.5 CUM and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Removing of excavated surplus soils n.exc 50 m and depositing where directed at a level n.exc 1.5 m from above the starting point, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of Cement Concrete (un-reinforced) of any description and in any Position not otherwise specifically provided for and removing the same from Site(s), complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L Cement Concrete (1:3:6) Type C2 (20mm Graded Stone Aggregate) as in Surface Channels and Drains, etc., including Use and Waste of necessary Form Work, complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in coping including form work, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Demolition of Brick Work built in Cement Mortar including all quoin, Arches, Pillars, etc. of any descriptions, complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L brick work with sub class 'B' bricks (with old size bricks) straight or curved on plan exc 6.00m mean radious, built in CM (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick built in CM 1:6. |
| 11 | Demolition of stone masonary built in cement mortar including all quoins, arches, pillars, copings etc, complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for walling of random rubble masonary Secunderabad type, well bedded, bonded and solidly hearted built in CM (1:4) ,complete all as specified and directed by Engineer-in-Charge. |
| 13 | -Ditto- but except stone. |
| 14 | M&L for broken glass coping on top of wall in CM (1:3), complete all as specified and directed by Engineer-in-Charge. |
| 15 | Raking out cement mortar joints on Random Rubble masonary wall, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Providing flush pointing to Random rubble masonary in CM (1:4), complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for raised pointing to Random Rubble Masonry brought upto courses in Cement Mortar (1:4), complete all as specified and directed by Engineer-in-Charge. |
| 18 | Demolition of plain cement concrete in ground floors/pavings n.exc 15cm thick below or above ground level, complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for 100 mm thick Cement Concrete (1:3:6) Type C2 (40mm Graded Stone Aggregate) as in Plinth protection , etc., finishing the cement concrete surface even and smooth without using extra cement, including Use and Waste of necessary Form Work, complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 100mm thick finished even & smooth w/out using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Demolition of Cement Concrete (reinforced) of any description and in any Position not otherwise specifically provided for and removing the same from Site(s), complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L Pre-Cast RCC (1:2:4) Type B1 (20mm Graded Stone Aggregate) as in Cover Slab of Manholes, Septic Tanks or Similar Articles with Plain Faces and Set in Cement Mortar (1:4) complete all as specified and as directed.Note : Reinforcement shall be Measured and paid seperataly under relevant items. |
| 23 | M&L for providing pre cast RCC type B-1, 1:2:4 (using 20mm graded stone agg) as in posts, struts etc area exc 100 and n exc 250 Sqcm with or without chamfered angles complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L PCC 1:2:4 type B-0 (using 12.5mm grade stone agg) as in benching, roof kurbs,etc with form work incl demolition of old concrete. |
| 25 | Dismantling of floor, hearth or wall tiling, incl cement mortar beeding but, not backing and removing the rubbish off the premises at any position, complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for 30mm thick Paving tiles using white cement and pigments of size 380mm x 380mm with wear resistant coating of approved design laid with cement slurry @ 3Kg/ Sqm over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 27 | M/L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair, complete, all as specified and as directed. |
| 28 | M & L for 18 to 20 mm thick granite (of any type) tile machine cut in floor/platform/tread, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 29 | M & L for 18 to 20 mm thick granite Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteand 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 30 | M & L Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed |
| 31 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 32 | M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match with shade including 15mm thick screed bed in CM(1:4), complete all as specified. |
| 33 | S & F Machine pressed precast concrete interlocking paver block any shape and size with gray cement and pigment (approved by GE) confirming to IS 15658-2006 of 60 mm thickness, M-35 grade including laid over , sand cushion bed and preparing the surface to uniform level to receive tiles and the corners shall be finished with 1:2:4 PCC (using 20 mm graded stone aggregate) finished the surface even and smooth including taking down old unserviceable tiles and depositing debries in low laying areas upto a lead of 500 mtrs complete all as specified and as directed by Engr-in-Charge. |
| 34 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s),complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L 15 mm thick rendering in cm 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement. |
| 37 | Removing/demolition of rusted and unserviceable barbed wire fencing of any size (each line) and any position, complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straing and fixing to nay type of standard rails, straining bolts incl securing or tying at crossings with and provision of galvanised mild steel wire, staples and pins etc, complete all as specified and directed by Engineer-in-Charge. |
| 39 | Ditto all as above but fixing only ( material obtained from item No.30 to be used ) |
| 40 | Restraining resucuring including making good staples etc, steel barbed wire any dia barbed with barbs spacings, complete all as specified and directed by Engineer-in-Charge. |
| 41 | Dismantling of old damaged chain link fencing wiremesh any type and size, complete all as specified and directed by Engineer-in-Charge. |
| 42 | Fixing only chain link fencing incl line wires any mesh size and type to any type of standards and incl provn of binding wire, complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply only chain link galvanised fencing any type or size, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Dismantling of (steel, wood, or RCC) posts or struts embedded in ground, any section incl taking out embedded portion and making good disturbed ground, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F MS work as in Post and strurts in fencing incl cutting tops to make shape as directed, drilling holes, notching for wire etc, flate iron fillet ( for securing wire mesh etc) incl all necessary drilling, bolting, riveting etc and similar work, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Welded steel wire fabric supplied and fixed complete to wood or steel members, weight per square metre n.exc 4 Kg, complete all as specified and directed by Engineer-in-Charge. |
| 48 | All as above but fixing only |
| 49 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation/mass filling all as complete all as specified and directed by Engineer-in-Charge. |
| 50 | Forming 12mm thick Expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'B' 100mm deep, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Preparing plastered or unplastered new surfaces of walls and applying two coats of cement base paint, white or tinted on plastered surface walls , complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F mild steel TMT bars 10mm dia and over cut to length bent to shape reqd including cranking bending spirally for hoping columns hookings ends binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F mild steel TMT 5mm dia and over upto and including 10mm dia in stirrups spaces and binder, complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F 2mm thick PVC tiles/sheets laminated plain coloured marbled mosaic or mottled finish laid with approved rubbed based adhesive in floors, including dismantling of existing floor, complete all as specified and directed by Engineer-in-Charge. |
| 55 | M&L for Preparation of new Steel and iron surfaces exc 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L for Preparation of old treated steel and iron surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F for MS work in Bands, straps, supports or stays for RWP, ventilating pipes, gutters including bolts, if reqd hooks (stay), clamps, holdfasts, wall ties, nosing angles, hooks for hanging fans and similar small articles conforming to Fe-290 gde E-165 |
| 58 | Complete removal of exisitng treatment on wall surfaces and applying of two coats of oil bound distemper over one coat of primer with white cement based putty finish. |
| 59 | All as per above but on new plaster surfaces. |
| 60 | M&L for Preperation of new surfaces of walls and applying Two Coats of Cement base paint over primer |
| 61 | M & L for Preparation of new plastered surfaces and applying two coats of weather proof antifungal Acrylic Exterior emulsion paint of Apex Ultima and shade over a coat of approved primer as recommended by the manufacturer over a coat of putty to make surfaces smooth all as required and as directed. |
| 62 | S&F framed work such as grills, framed guards bars and similar work conforming to 290 Gde F-165 complete all as specified & directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender