Tender For Provision Of Chain Link Fencing And Gates At Ssp Jetty, Demolition Of Paintex Store (T-156) Near Flotilla Sports Ground And Provision Of Plain Cement Concrete Hard Standing At Cross Lane 3-4 At At Naval Dockyard, Visakhapatnam Under Ge (I)
Tender Value
52.90 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
1.04 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Chain Link Fencing And Gates At Ssp Jetty, Demolition Of Paintex Store (T-156) Near Flotilla Sports Ground And Provision Of Plain Cement Concrete Hard Standing At Cross Lane 3-4 At At Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | [SCHEDULE 'A' PART-I [B/R WORKS] |
| 2 | Excavating over areas, not exc 1.5M deep and getting out hard/dense soil complete all as specified and directed. |
| 3 | Excavating over areas, exc 1.5M but in exc 3M deep and getting out hard/dense soil all as specified and directed. |
| 4 | M&L for PCC in foundations, plinth beams, filling and mass concrete type D2, 1:4:8 (40mm graded aggregate) all as specified and directed. |
| 5 | M&L for formwork flat or curved to sides of concrete foundations, footings, based of columns and plinth beams and similar work vertical or to batter complete all as specified and directed. |
| 6 | M&L for formwork to sides of square pillars, posts, struts, piers, columns and stanchions fiar finished complete all as specified and directed. |
| 7 | M&L for reinforced cement concrete M-30 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, lintel beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 8 | M&L for reinforced cement concrete M-30 (20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 10mm dia and over cut to legth, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L for mild steel TMT bars 5mm dia upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | Excavating in post holes (or similar holes) each not exc. 05 CuM getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm in hard dense soil complete all as specified and directed. |
| 13 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489.:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silcon additives @ 1.43 litre/10 SqM over and including priming coat of exterior primer applied @ 0.90 litre/10 SqM over new surfaces complete all as specified and directed. |
| 14 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation and mass concrete all as specified and directed. |
| 15 | Supply and fix rails, half round or other steel secrtion or core for wooden hard rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc wind ties or roof including sevuring bolts posts and struts in fencing including cutting top to shape as directed, drilling holes, notching for wire etc., flat iron fillets ( for securing wire mesh etc) including all complete all as specified and directed, |
| 16 | Supply and fix mild steel screw bolts of 5 to 10mm dia shank (machine made) with hexagonal or square heads at one end screwed the toher each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and not exc 15cm long all as specified and directed. |
| 17 | S&F for chain linke PVC coated MS galvanised iron fencing of made out of 4mm dia, wire mesh size 100mm x 100mm made into mattress or cages straining and fixing to RCC/MS fencing post complete all as specified and directed. |
| 18 | Fixing only chain link fencing including line wires, any mesh size and type to any type or strands rails straining bolts etc including provision of binding wire all as specified and directed. |
| 19 | M&L for framed work such as grills, gratings etc., with ends of bars shoulders and/or reivetted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed. |
| 20 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome complete all as specified and directed. |
| 21 | M&L for granite (any type) work (table rubbed and polished) 18 to 20mm thick in steps, jambs, pillars, window cills, cooking platform and like in floor etc., in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutter exc. 1.5 SqM but not exc. 4 SqM each (Without taking off shutters from the frame) all as specified and directed. |
| 23 | All as per item No. 1.21 above, but not exc. 1.5 SqM each all as specified and directed. |
| 24 | Dismantling timber scantlings 40 Sqcm and less in section, in fillets, rails, posts, rafters, purlins, etc., under 40 Sqcm in section complete all as specified and dircted. |
| 25 | Dismantling timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed. |
| 26 | Dismantling asbestos cement (corrugated, semi corrugated etc.,) sheets in roof coverings in any position complete all as specified and directed. |
| 27 | Demolition brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc and removing the debris to a distance 5 KM away from the Dockyard premises all as specified and directed. |
| 28 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 29 | Demolition of cement concrete of any description and in any position and removing the material away from Dockyard premises complete all as specified and directed. |
| 30 | Removing building materials etc., (other than spoil payble under items 03028 to 03031 in section-3- Earth work) to a distance of 10 KM or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and directed. |
| 31 | Surface excavation not exc 30 cm deep and averaging 15cm deep (hard/dence soil) and getting out disposing off side MD land complete all as specified and directed. |
| 32 | M&L for hard core of broken stone or boulder cfv guage not exc 63mm deposited spread and leveled in layers not exc 15cm thick watered rammed to true surface complete all as specified and directed. |
| 33 | M&L for 100mm thick cement concrete type B-2,1:2:4 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed. |
| 34 | M&L for forming 12mm thick expansion joints for thickness of slab 150mm filed with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'B' complete all as specified and directed. |
| 35 | M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound and sealed with sealing compound, Grade 'B' complete all as specified and directed. |
| 36 | Finishing surface of convrete roads, pavements, by brooming complete all as specified and directed. |
| 37 | [SCHEDULE 'A' PART-II [E/M WORKS] |
| 38 | Taking down old unserviceable copper/ aluminium point wiring (Light, fan, socket or power socket) complete including fixture and fittings such as switches, celing roses, pendants, regulators, sockets, light fittings etc all as specified and directed. |
| 39 | Taking down old unserviceable DBs and main switches alongwith MCBs and MCCBs complete all as specified and directed. |
| 40 | Taking down LT UG cable off sizes for keeping in safe custody or for taking credit and making good disturbed surface of wall, floors etc., all as specified and directed. |
| 41 | Excavation in trenches not exc 1.5M wide and not exc 1.5M in depth and getting out in soft loose soil all as specified and directed. |
| 42 | Excavation in trenches not exc 1.5M wide and not exc 1.5M in depth and getting out in soft disintegrated rock (considered for road cutting) all as specified and directed. |
| 43 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick all as specified and directed. |
| 44 | Removing of excavated material not exc 50M and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed. |
| 45 | Supply and fixing HDPE double wall pipe corugated pipe of size 40 mm dia for cable protection laid in trenches in lieu of sand/brick protection all as specified and directed. |
| 46 | Supply and laying in trenches XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade cross section area 16 Sqmm 4 core and connection complete with aluminium cable lugs all as specified and directed. Please Enable Macros to View BoQ information |
| 47 | Supply and laying in trenches XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade cross section area 16 Sqmm 4 core and connection complete with aluminium cable lugs all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender