Tender For annual repair & maintenance of To Satellite Office Nalagarh.
Tender Value
14.53 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
29100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To Satellite Office Nalagarh.
BOQ
| Sl. No. | Item Description |
| 1 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 2 | 15mm cement plaster in single coat on fair side of brick/ concrete/ stone walls for exterior plastering i/c bends at corner ( as shown in arch drawing) upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including carriage of materials within allleads and lifts. |
| 3 | Painting two coats on concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required interior |
| 4 | Painting two coats on concrete masonry/plaster Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture exterior paint |
| 5 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 6 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 7 | Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 8 | Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. |
| 9 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (midium grade) tube fitting and clamps including making good the wall ceiling and floor. 15 mm nominal bore. |
| 10 | Providing and fixing in treanches galvanised mild steel tubes (midium grade) tube fitting (earth work in treanches to be measured and paid for separately). 20 mm nominal bore. |
| 11 | Providing and fixing C.P brass bib taps with capstan head weigth 400 gms . |
| 12 | Providing and fixing vitreous china padestal for wash basin complete recessed at the back for the reception of pipes and fittings: |
| 13 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
| 14 | Providing and fixing vitreous china wash down water closet (Indian type W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1( 1 cement : 1 sand) (seat and cover to be measured and paid for separately) |
| 15 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. Or M.S brackets painted white including cutting holes and making good the same but excluding fittings : |
| 16 | Providing and fixing C.P Brass pillar tap with capstan head |
| 17 | Providing and fixing uplasticised PVC connection pipe with brass unions |
| 18 | Providing and fixing particle board lining with butt jointing and nails(frame work and cover fillets to be measured and paid separtely).19 mm thick |
| 19 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges with necessary screws. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 21 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, framed, guards, bars ladders and railing, brackets and similar works |
| 22 | Providing & fixing glazing in doors, windows, ventilators shutters & partitions, CBoared etc. with necessary fittings etc. complete as per the Architectural drawing & the direction of Engineer-in-Charge glazing glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 23 | Applying priming coat over concrete based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering |
| 24 | Painting Three or more Coats on Concrete Surfaces including fiber jali Painting two coats with synthetic enamel paint in all shades on concrete surfaces as per drawing and Technical Specification Clause 1701 |
| 25 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group-C |
| 26 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 27 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (27.1) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 28 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 29 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 30 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 31 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 32 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (28.1) 3x1.5 Sq. mm. |
| 33 | 3x 4 Sq. mm. |
| 34 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm dia. |
| 35 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 36 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 37 | Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make (32.1) LED Batten Light 10W |
| 38 | LED Batten Light 20W |
| 39 | S/E of LED Downlighter(recess)round type with CRCA/PDC body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings. (33.1) Square/round LED Panel Light 10/12W Surface |
| 40 | Square/round LED Panel Light 15W Surface |
| 41 | Square/round LED Panel Light 24W Surface |
| 42 | S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. LED bulk head 10/12W |
| 43 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 44 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 45 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (37.1) Ceiling Fan 900 mm sweep |
| 46 | Ceiling Fan 1200 mm sweep |
| 47 | Ceiling Fan 1400 mm sweep |
| 48 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 49 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (39.1) 12 way , Double door |
| 50 | 16 way Double Door |
| 51 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 52 | Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.(41.1) 63 A DP |
| 53 | 40/63 A FP |
| 54 | Supplying and fixing following rating, follwing pole, 240/415 V( four pole ), residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (42.1) 63 A Four Pole |
| 55 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 56 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 57 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. (45.1) Armoured cable 25 sq. mm (3.5 core) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender