Tender For Special Repair To Office Building.
Tender Value
9.79 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
19600
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Office Building.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 2 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 3 | 15mm cement plaster in single coat on fair side of brick/ concrete/ stone walls for exterior plastering i/c bends at corner ( as shown in arch drawing) upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including carriage of materials within allleads and lifts. |
| 4 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 5 | Finishing wall with Acrylic smooth exterior paint of required shade new work two or more coats @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm including carriage of material in all leads and lifts.over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. and including water thinnable priming coat with cement primer (interior paint) |
| 7 | Providing and fixing C.P Brass pillar tap with capstan head C.P Brass pillar tap with capstan head |
| 8 | Providing and fixing C.P brass bib taps with capstan head weigth 400 gms . 15mm dia |
| 9 | Providing and fixing PTMT Coloured / white flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately 10 litres net capacity. |
| 10 | Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover |
| 11 | Poviding and fixing CP brass toilet paper holders. |
| 12 | Providing and fixing Brass full way valve with wheel. i) 15mm dia |
| 13 | Providing and fixing Brass angle valve 15mm dia without nuts and pipes |
| 14 | Supplying and fixing C.I. Cover 300mmx300mm with frame for gully trap standard pattern. The weight of cover to be not less than 4.53 kg. |
| 15 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore |
| 16 | Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings: Flat back 600mmx480mm |
| 17 | Plain/reinforced cement concrete in sub structure as per drawings and technical specification clauses 802, 804, 805, 806, 807, 1202 and 1204. P.C.C. grade M 20 (i) Nominal mix (1:2:4) including cost of form work, centering, shuttering etc. |
| 18 | Providing & fixing powder coated anodized aluminium work for frames of doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868 ( Minimum anodic coating of grade AC 15 ) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, stright, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/ panelling C.P. brass/ Stainless steel screws. All complete as per Architectural drawing & the direction of Engineer-in-Charge.For doors, windows & ventilators & glazing partitions frames as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 19 | For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. |
| 21 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc |
| 22 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 2nd class deodar wood.40mm thick. |
| 23 | Painting two coats (excluding priming coat) on new steel and other metal surfaces, with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with enamel paint other than white |
| 24 | Second class brick work using common brunt clay building bricks in super structure above plinth level upto all floor height in cement mortar 1:4 (1 Cement : 4 Sand) |
| 25 | Providing and fixing PVC Wall pannel of approved colour and shade complete in all respects and to the entire satisfaction of the Engineer in Charge. |
| 26 | Providing and fixing WPC (Wood Plastic Composite) decorative wall panels of approved design, size and shade, directly pasted on prepared wall surface using approved construction adhesive, including necessary cutting, finishing, edge trims and accessories, complete as directed by the Engineer-in-Charge. |
| 27 | S/E of LED Downlighter(recess)round type with CRCA/PDC body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings.Square/round LED Panel Light 10/12W Surface |
| 28 | Installation of ventilatinmg /exhaust fan in the existing opening, including making good BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor the damage, connection, testing, commissioning etc. as required.Supply & Erection of Ventilating Fan ) following size complete with motor,, with minimum power consumption, rigid frame with rubber mounting for silent operation, in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC.Exhaust Fan, 250 mm sweep |
| 29 | S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. LED bulk head 10/12W |
| 30 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 31 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.Ceiling Fan 1200 mm sweep |
| 32 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 33 | Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.63 A DP |
| 34 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15 mm nominal outer dia Pipes |
| 35 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 20 mm nominal outer dia Pipes |
| 36 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling, brackets and similar works. |
| 37 | Providing and fixing PVC water storage tank, IS : 12701 marked,GI inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to a height of 10.00metres above ground level 1000 litres Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender