Tender For Construction Work Of Pump House, Oht, D/S, Rising Main Work, Boundary Wall, Sq, In Sadhopur Urf R Ur Gram Panchayat Water Supply Scheme Block- Reotipur World Bank Batch-2 In District Ghazipur Of Uttar Pradesh.
Tender Value
1.32 Crore
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
2.63 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghazipur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Pump House, Oht, D/S, Rising Main Work, Boundary Wall, Sq, In Sadhopur Urf R Ur Gram Panchayat Water Supply Scheme Block- Reotipur World Bank Batch-2 In District Ghazipur Of Uttar Pradesh.
BOQ
| Sl. No. | Item Description |
| 1 | Sadhopur Urf Rampur Single Village Piped Water Supply Scheme |
| 2 | BUILD PHASE (SL. NO. - 5.02 TO SL. NO. - 5.62) |
| 3 | Construction of 1.3 m high and 115mm thick boundary wall with 230 mmx230 mm thick pillar made in Brick masonry in 1 cement and 4 sand mortar, the spacing between two pillar should not be more than 3.0 m c/c and the depth of foundation should not be less than 0.60m, at the site of water works as per departmental type design and drawing, and, as per specifications given in the bid document including supply of all materials, labour T&P etc.for proper completion of work as per instructions of Engineer -in -charge. (Drawing No.D-1) |
| 4 | Supply and fixing of 3.6 m x 1.20 m MS gate including fabrication and supply of steel and construction of bounary wall pillars of size 1.35mx0.23mx0.23m with ornamental brick work 115mm th. around RCC, as per departmental type design and drawing (Drawing No. D-1) and as per specifications laid down in the bid document, including supply of all material, labour,T&P etc.required for proper completion of work as per instructions of Engineer-in-charge. |
| 5 | Supply and fixing of 1.2m wide MS wicket gate including fabrication and supply of steel and construction of boundary wall pillars etc. as per specifications laid down in the bid document, including supply of all material, labour,T&P etc.required for proper completion of work as per instructions of Engineer-in-charge. |
| 6 | Construction of Brick on edge pavement for approach to water works, as per departmental type design and drawing and as per specifications laid down in the bid document, including supply of all materials , labour, T&P etc.required for proper completion of work as per instructions of Engineer -in -charge. |
| 7 | Earth filling work for proper leveling of water work site, in accordance with the contour map and Grid map of existing site enclosed (Drawing no.D-1), including leveling, dressing, excavation and filling of earth where necessary and also including all labour, materials, T&P etc.required for proper completion of works and also including carriage of earth from within a distance of about 8 km. from the site of works as per instructions of Engineer -in -charge. |
| 8 | Construction of Tube Well Boring Done Testing & Commisaning Should be done Work in only 20% |
| 9 | Supply and installation of 1000 LPM, 48 meter head 20 H.P. submersible clear water Pump set (As per IS 8034:1989) including switch gear (cubical panel board, starter, cable, power wiring & earthing etc) necessary tools, main piping & valves, pressure gauge, depth gauge with their fittings, double earthing. Supply and fixing of suitable size chlorinating plant. Supply and fixing of 2 ton capacity 4.5 m lift chainpully block, Electric resistance rubber sheet of 1x2 m size 12.5 mm thick, complete in all respect as per detailed specifications. (All supply will be done after the approval of Engineer-in-charge. |
| 10 | Supply of one number Spare Pump set of 1000 LPM, 48 meter head 20 H.P. submersible clear water (As per IS 8034 : 1989) after approval of Engineer-in-charge. |
| 11 | 6 point wiring of Pump house for light with 2.00 sq.mm PVC insulated multi strand copper conductor cable in rigid PVC condult pipe on surface complete 14 S.W.G. copper earth continuously wire piano type switch and celling rose/angle/baton holder on 3mm thick phenolic laminated back light sheet etc complete in all respect including luminaries with IS amp. switch fuse unit as per instruction of Engineer-in-charge after approval of drawing. |
| 12 | Provision for LED Light in water work campus with all accessories and fitting. |
| 13 | Supply, installation & commissioning of suitable capacity Automatic Voltage stabilizer input voltage 200-480±6% or suitable range as per site condition and output voltage 415 ±1%, 3 phase 50 C/S AC for satisfactorily run the above pump set, complete in all respect as per detailed specifications. |
| 14 | Erection & commissioning of Transmission line of ACSR weasel conductor including all materials i.e. poles, conductors , insulators, required cable, etc from the nearest existing H.T. line Supply & fixing of 11KV/0.4kV, 63 KVA Transformer with Double Pole Sub Station including security charges , Energy Meter, System loading charges , Fixed charges, processing fees etc completed in all respect. |
| 15 | Provide all materials, labour, T&P etc. complete and construct Pump house size (3.6x3.0x3.0)m Chlorinating room size (2.5x1.8x3.0)m as per departmental type design and drawing (drawing no-D-2) and as per the specifications for civil work given in the bid document, including supply of all material, labour and T&P etc complete as per instructions of Engineer -in -charge. (Remaining 35% Work should be done) |
| 16 | Provide all materials, labour, T&P etc. complete and constructed Bye-pass chamber for pump house as per departmental type design and drawing (drawing no.D-3) and as per the specifications for civil work given in the bid document, including supply of all material, labour and T&P etc complete as per instructions of Engineer -in -charge. |
| 17 | Supply of all materials labour T&P etc. for complete construction of R.C.C. Over Head Tank of 300 KL capacity with 18 Meter staging above ground level with main components, including cost of soil testing and assuming bearing capacity of soil as 8 MT, with supply of design and drawings. ( Remaining 60% work should be done) |
| 18 | Excavation of earth in ordinary soil (loam, clay or sand) for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering, ramming of the excavated earth into the trench and also disposal of surplus earth upto 50m from the center of the trenches including supply of all material labour, T&P etc complete as per instructions of Engineer -in -charge. |
| 19 | Supply of following sizes (D.I. K-7) pipes for rising main conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials such as CIS/S or D.F specials conforming to latest /relevant I.S. specifications, suitable for D.I pipes, as per IS-1239 /2000 and IS 8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches).all complete as per instructions of Engineer -in -charge. |
| 20 | 150 mm dia |
| 21 | Supply of following sizes pipes for distribution system conforming to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest /relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer -in -charge. |
| 22 | 200 mm dia AC Pressure pipe Class -15 (Maza Process) |
| 23 | 160 mm dia HDPE, PE100, 6Kg/cm2 |
| 24 | 140 mm dia HDPE, PE100, 6Kg/cm2 |
| 25 | 110 mm dia HDPE, PE100, 6Kg/cm2 |
| 26 | 110 mm dia HDPE, PE100, 6Kg/cm2 (Only Testing & Commisning to be Done) |
| 27 | 90 mm dia HDPE, PE100, 6Kg/cm2 |
| 28 | 90 mm dia HDPE, PE100, 6Kg/cm2 (Only Testing & Commisning to be Done) |
| 29 | Supply and carting up to site of work of the following dia C.I. butterfly /sluice valves, class I, working pressure 10 Kg/cm2 confirming to IS: 780/1969 or its latest amendments, F.O.R. destination, and lowering them into the already prepared trenches, fixing in position and jointing them with pipelines and testing etc. complete and also including supply of jointing materials etc. complete .including all taxes and insurance, as per instructions of Engineer -in -charge. |
| 30 | Sluice valve - 200 mm dia |
| 31 | Sluice valve - 150 mm dia |
| 32 | Sluice valve - 125 mm dia |
| 33 | Sluice valve - 100 mm dia |
| 34 | Sluice valve - 80 mm dia |
| 35 | Scour valve - 80 mm dia |
| 36 | Supply of 50 mm dia screwed down type air valve with gun metal seat conforming to latest/relevent I.S. specifications including all taxes and insurance, carting up to site of work and lowering them into the trenches, fixing in position and jointing them with pipelines and testing etc. complete (including supply of jointing materials etc complete) as per instructions of Engineer -in -charge. |
| 37 | Supply of under ground sluice value type fire hydrant consisting of 80 mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete conforming to latest/relevent I.S.specifications including all taxes and insurance up to site of work and lowering them into the trenches, fixing in position and jointing them with pipelines and testing etc. complete (including supply of jointing materials etc. complete as per instructions of Engineer -in -charge. |
| 38 | Supply and fixing of the following size of Digital Bulk Water Meter Enclosed Type Metallic gears (IS: 2373/1981) for measurement of bulk flow at different Locations (at the entry of gram panchayat) F.O.R. destination including all taxes and 5 year insurance etc. complete as per instructions of Engineer -in -charge. |
| 39 | 150 mm dia |
| 40 | Supply of all materials, labour, T&P. required and construct masonary type Bulk Water meter / Butterfly valves chamber including supply of M.S. Manhole cover as per departmental type design and drawing (Drawing no.D-4) including all material labour, T& P etc. complete as per instructions of Engineer -in -charge. |
| 41 | 150 mm dia |
| 42 | Construction of following type chambers as per department type design and drawing including Heavy duty M.S. Manhole Cover and all materials, labour, T&P etc complete for proper completion of work as per instructions of Engineer -in -charge. |
| 43 | Sluice valve chamber (masonry Type) (drawing no.D-4) |
| 44 | Sluice valve chamber (surface box Type) (D-13) |
| 45 | Fire Hydrant(drawing no.D-5) chamber |
| 46 | Air Valve Chamber (drawing no.D-6) |
| 47 | Scour Valve Chamber (drawing no.D-4) |
| 48 | Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3, for pipe line, including supply of MS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of Engineer -in -charge. (drawing no. D-14) |
| 49 | Mild Steel or Iron work In RCC wrought to required shape as necessary including bending for proper completion of the work including supply of steel and wastage etc. |
| 50 | Provide all materials labour, T&P etc. and construct sigle room staff quarter / office room at water works site identified by the Engineer-in-charge as per department type design and drawing and specifications of civil works laid down in the bid document, including all material labour, T&P etc complete for proper completion of work as per instructions of Engineer -in -charge. (Drawing No.D-7) (Remaining 65% Work to be done) |
| 51 | Installation of suitable capacity simple T.W. automation system to control operation of the pumping plant with respect to high/low water level in OHT and electromagnetic online flowmeter in delivery line of TW inside the pump house with arrangement for communication of data with GSM and GPRS system to show required parameters including all accessories etc. complete in all respect as per instructions of Engineer -in –charge. |
| 52 | Dismantling of Following type of surfaces including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto a distance of 50m as per instructions of Engineer -in -charge. |
| 53 | B.O.E. surface |
| 54 | Bituminous surface |
| 55 | C.C. Road |
| 56 | Reinstatement of the following type of road surface with old and new materials including supply of all materials, labour, T&P etc. required for proper completion of the work as per instructions of Engineer -in -charge. |
| 57 | B.O.E. Surface (Assuming 50% new brick and 50% old bricks used) |
| 58 | Bituminous surface |
| 59 | C.C. Road |
| 60 | Provision for following types of Culvert crossing (drawing no.D-9) as per departmental type design and drawing including shifting of telephone cables etc. along the alignment of pipe line including supply of D.I. pipes and specials, and their laying and jointing testing etc. complete as per instructions of Engineer -in -charge. |
| 61 | Culvert Crossing |
| 62 | Making house connection from distribution line to outer wall of house, with supply of G.I. pipe (Average 10.0 mtr.) including specials, Brass ferrule, Saddle clamp etc. of suitable size, T&P etc. including excavation, laying and jointing for proper completion of work as per instructions of Engineer-in-charge. (drawing no.D-12). |
| 63 | Making house connection from distribution line to outer wall of house, with supply of G.I. pipe (Average 10.0 mtr.) including specials, Brass ferrule, Saddle clamp etc. of suitable size, T&P etc. including excavation, laying and jointing for proper completion of work as per instructions of Engineer-in-charge. (drawing no.D-12). (Remaining 30% work to be done.) |
| 64 | Provision for trial and run of the scheme for 3 months. |
| 65 | Construction of single tap pillar type stand post as per type design as per instructions of Engineer -in -charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender