Tender For Supplying And Fixing Hdpe Freshwater Pipeline From Blue Gate To Cj-Ii At V.O. Chidambaranar Port Authority
Tender Value
50.45 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
16 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supplying And Fixing Hdpe Freshwater Pipeline From Blue Gate To Cj-Ii At V.O. Chidambaranar Port Authority
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removal of Reinforced Cement Concrete (RCC) above ground level (G.L.) up to floor two level, including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m, including all labour, tools, equipment, transport, fuel, etc., complete, complying with AISS and as directed by the departmental officers. |
| 2 | Earthwork excavation in trenches for foundation in sand and other loose soils, not exceeding 1.50 m in width, including dressing of sides and ramming of bottom for lifts up to 1.50 m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m and lift of 1.50 m. Cost includes shuttering, strutting, bailing out seepage water wherever necessary, etc., complete, complying with AISS and as directed by the departmental officers. |
| 3 | Supplying, fabricating and fixing in position of 350 mm GI clamp to existing pipeline using 8 mm GI plate, cutting, bending, welding and providing required holes, etc. The rate includes cost of 8 mm dia. GI plate, bolt and nut, washer, rubber sheet and transportation charges, fabrication charges, fixing charges, labour, tools, equipments, etc., complete and as directed by the departmental officers. |
| 4 | Supply and Delivery of 200mm dia HDPE-PE100 (PN6) Pipe as per IS 4984:2016 at site of work including loading, unloading, transportation, etc., complete and as directed by the departmental officers. |
| 5 | Supply and delivery of 200mm dia. HDPE (PN6) 90 degree Bend as per IS 8360:1977 / Part I (Reaffirmed 1992), Part II and III (Reaffirmed 2002) and other specifications at site of work including loading, unloading, freight, stacking, transit and insurance, etc., complete and as directed by the departmental officers. |
| 6 | Supply and delivery of 200 mm dia. HDPE (PN6) Equal Tee as per IS 8360:1977 / Part I (Reaffirmed 1992), Part II and III (Reaffirmed 2002) and other specifications at site of work including loading, unloading, freight, stacking, transit and insurance, etc., complete and as directed by the departmental officers. |
| 7 | Lowering of 200mm HDPE pipe and specials in to trench and laying to proper grade and alignment including all labour, tools&plants, etc., complete and as directed by departmental officers. |
| 8 | Jointing 200mm dia. HDPE Pipes and Specials by butt fusion welding/electro fusion welding joints using fusion equipment as per ISO21307-2011and as per IS7634(Part-2):2012 including cost of hire charges for butt fusion equipment, power supply arrangements, all labour, etc., complete and as directed by the departmental officers. |
| 9 | Testing of 200 mm dia HDPE pipes with hydraulic testing equipment by filling with water (including cost of water @ Rs.70/KL) and testing to the recommended pressure in convenient stretches and attending the bursts, if any occurred during the test, excluding the cost of pipes, including other incidental and operational charges etc., complete as directed by the departmental officers. |
| 10 | Supply and Delivery of 160mm dia HDPE-PE100 (PN6) Pipe as per IS 4984:2016 at site of work including loading, unloading, transportation, etc., complete and as directed by the departmental officers. |
| 11 | Supply and delivery of 160mm dia. HDPE (PN6) 90 degree Bend as per IS 8360:1977 / Part I (Reaffirmed 1992), Part II and III (Reaffirmed 2002) and other specifications at site of work including loading, unloading, freight, stacking, transit and insurance, etc., complete and as directed by the departmental officers. |
| 12 | Supply and delivery of 160 mm dia. HDPE (PN6) Equal Tee as per IS 8360:1977 / Part I (Reaffirmed 1992), Part II and III (Reaffirmed 2002) and other specifications at site of work including loading, unloading, freight, stacking, transit and insurance, etc., complete and as directed by the departmental officers. |
| 13 | Lowering of 160mm HDPE pipe and specials in to trench and laying to proper grade and alignment including all labour, tools&plants, etc., complete and as directed by departmental officers. |
| 14 | Jointing 160mm dia. HDPE Pipes and Specials by butt fusion welding/electro fusion welding joints using fusion equipment as per ISO21307-2011and as per IS7634(Part-2):2012 including cost of hire charges for butt fusion equipment, power supply arrangements, all labour, etc., complete and as directed by the departmental officers. |
| 15 | Testing of 160 mm dia HDPE pipes with hydraulic testing equipment by filling with water (including cost of water @ Rs.70/KL) and testing to recommended pressure in convenient stretches and attending the bursts, if any occurred during the test, excluding the cost of pipes including other incidental and operational charges etc., complete as directed by the departmental officers. |
| 16 | Supply and Delivery of 110mm dia HDPE-PE100 (PN6) Pipe as per IS 4984:2016 at site of work including loading, unloading, transportation, etc., complete and as directed by the departmental officers. |
| 17 | Supply and delivery of 110mm dia. HDPE (PN6) 90 degree Bend as per IS 8360:1977 / Part I (Reaffirmed 1992), Part II and III (Reaffirmed 2002) and other specifications at site of work including loading, unloading, freight, stacking, transit and insurance, etc., complete and as directed by the departmental officers. |
| 18 | Supply and delivery of 110 mm dia. HDPE (PN6) Equal Tee as per IS 8360:1977 / Part I (Reaffirmed 1992), Part II and III (Reaffirmed 2002) and other specifications at site of work including loading, unloading, freight, stacking, transit and insurance, etc., complete and as directed by the departmental officers. |
| 19 | Lowering of 110mm HDPE pipe and specials in to trench and laying to proper grade and alignment including all labour, tools&plants, etc., complete and as directed by departmental officers. |
| 20 | Jointing 110mm dia. HDPE Pipes and Specials by butt fusion welding/electro fusion welding joints using fusion equipment as per ISO21307-2011and as per IS7634(Part-2):2012 including cost of hire charges for butt fusion equipment, power supply arrangements, all labour, etc., complete and as directed by the departmental officers. |
| 21 | Testing of 110 mm dia. HDPE pipes with hydraulic testing equipment by filling with water (including cost of water @ Rs.70/KL) and testing to recommended pressure in convenient stretches and attending the bursts, if any occurred during the test, excluding the cost of pipes, including other incidental and operational charges, etc., complete as directed by the departmental officers. |
| 22 | Providing suitable 20 mm / 25 mm / 32 mm dia. HSC connection in HDPE mains for Water Supply Scheme using Electrofusion Tapping Saddle PE80 blue, PN 12.5 with female threaded metal insert of SS 304 as per standards BS EN 12201 tested as per BS 6920 for drinking water in WRC-NSF Ltd., UK (Non-wrap with top loading type), for sizes 63 mm to 315 mm dia. distribution HDPE pipes, including cost of materials, fixing, labour charges, etc., complete and as directed by the departmental officers. |
| 23 | Providing and laying Plain Cement Concrete1:4:8 (One part of cement, 4 parts of M.Sand (CrushedStoneSand) & 8Parts of 40mm nominal size metal)for foundation using 40mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 24 | Brick work in Cement Mortar1:5 (M.Sand (Crushed Stone Sand))(One cement, five M.Sand (Crushed Stone Sand))using chamber burnt bricks for walls in Ground Floor of the building including cost of allmaterials,l abour, curing etc.,complete complying with AISS and as directed by the departmental officers. |
| 25 | Plastering the Brick work 15mm thick in Cement Mortar1:5 (Plastering Sand(P-Sand))(One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven)in all floors up to full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 26 | Supplying and fixing of Cast Iron Double Flanged Non-Rising Type Sluice Valve of 8\\" dia. conforming to IS:14846 PN 1.0 pattern with high tensile brass spindle and gunmetal working parts. The rate includes cost of Cast Iron Double Flanged Non-Rising Type Sluice Valve of 8\\" dia., removing the existing valve and refixing the new valve with accessories, installation, transportation and labour charges, etc., complete and as directed by the departmental officers. |
| 27 | Supplying and fixing of Cast Iron Double Flanged Non-Rising Type Sluice Valve of 4\\" dia. conforming to IS:14846 PN 1.0 pattern with high tensile brass spindle and gunmetal working parts. The rate includes cost of Cast Iron Double Flanged Non-Rising Type Sluice Valve of 4\\" dia., removing the existing valve and refixing the new valve with accessories, installation, transportation and labour charges, etc., complete and as directed by the departmental officers. |
| 28 | Applying One coat of Alkali Resistant Primer and Two coats of ACE-Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 29 | Filling basement with available excavated earth in trenches, plinth, sides of foundation, etc., in layers not exceeding 20 cm in depth, consolidating and watering, etc., complete complying with AISS and as directed by the departmental officers. |
| 30 | Providing and fixing R.C.C. precast slabs of 100 mm thickness in various sizes, made with cement concrete in the proportion of 1:1.5:3, including all labour, materials, formwork, reinforcement, conveyance, and installation of slabs, complete in all respects, complying with AISS specifications and as directed by the departmental officers. |
| 31 | Supply and delivery of 80 mm Tamper Proof DI Single Chamber Air Release Valves with pressure range from PN 1.0 to 2.5 with body and cover made of Ductile Iron of Grade GGG40 or equivalent grade conforming to IS 1865 with Food Grade Epoxy Powder Coating (EP-P) inside and outside of colour Blue RAL 5005. All internal parts such as float, shell, etc., cover bolts made of Austenitic Alloy Steel of SS AISI 304/316. The float shall be made of Polytetrafluoroethylene (PTFE) / Austenitic Alloy Steel of AISI 304/316, etc., complete and as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender