Tender For Day To Day Maintenance To Bsnl Staff Quarters In Sector-43A, Sector-44A, Sector 36A, Sector 36B, Sector 39B, Te Sector-4, Te Sector-7, Te Building Manimajra, Te Sector-37D, Te Sector-34A & Admn Building Sector 34A, Chandigarh For The Year
Tender Value
9.52 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
3 days left
EMD
19050
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance To Bsnl Staff Quarters In Sector-43A, Sector-44A, Sector 36A, Sector 36B, Sector 39B, Te Sector-4, Te Sector-7, Te Building Manimajra, Te Sector-37D, Te Sector-34A & Admn Building Sector 34A, Chandigarh For The Year 2026-27-4Th Call.
BOQ
| Sl. No. | Item Description |
| 1 | SH : Finishing |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 3 | a) One or more coats on old work. |
| 4 | SH : Repairs To Building |
| 5 | Providing water proofing compound Dr. Fixit 101 LW+ or equivalent as per the direction of Engineer-in-Charge. |
| 6 | Re-setting of tougned glass door / aluminum door, tightening of cleats etc. replacing of pivots or aluminium hinges or rubber gasket wherever required including steel screws etc. all complete. |
| 7 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 8 | a) With stainless steel cover plate |
| 9 | SH: - MISCELLANEOUS |
| 10 | Provision of Carpenter services for carrying out Day to day maintenance to BSNL staff quarters in sector 43 A, sector 44 A, sector 36 A, sector 36 B, sector 39 and TE sector 37 D, TE sector 34 A & Admn Building sector 34 A Chandigarh, complete as per the direction of Engineer-in-Charge (One carpenter to be provided per month with conveyance). |
| 11 | Provision of Mason services for carrying out Day to day maintenance to BSNL staff quarters in sector 43 A, sector 44 A, sector 36 A, sector 36 B, sector 39 and TE sector 37 D, TE sector 34 A & Admn Building sector 34 A Chandigarh, complete as per the direction of Engineer-in-Charge (One mason to be provided per day with conveyance). |
| 12 | Provision of plumber services for carrying out Day to day maintenance to BSNL staff quarters in sector 43 A, sector 44 A, sector 36 A, sector 36 B, sector 39 and TE sector 37 D, TE sector 34 A & Admn Building sector 34 A Chandigarh, complete as per the direction of Engineer-in-Charge (One plumber to be provided per month with conveyance). |
| 13 | Provision of sewerman services for carrying out day to day maintenance jobs (i.e Cleaning the chowked manhole to manhole sewer lines including manhole complete with rodding set etc) in sector 43 A, sector 44 A, sector 36 A, sector 36 B, sector 39 and TE sector 37 D, TE sector 34 A & Admn Building sector 34 A Chandigarh, complete as per the direction of Engineer-in-Charge (One Sewerman with rodding set and other required tools to be provided for 04 Hours daily per month with conveyance). |
| 14 | Provision of beldar services for carrying out day to day maintenance jobs (i.e Cleaning the terraces of buildings and staff quarters in routine maintenance, assisting with plumber / mason / carpenter in various jobs wherever required in sector 43 A, sector 44 A, sector 36 A, sector 36 B, sector 39 and TE sector 37 D, TE sector 34 A & Admn Building sector 34 A Chandigarh, complete as per the direction of Engineer-in-Charge (One beldar to be provided per month with conveyance). |
| 15 | Providing ISI marked following items at BSNL Civil Inquiry at #80, Sector-43A, Chandigarh. |
| 16 | Orissa pan white WC seat 580mm |
| 17 | European WC seat white |
| 18 | Low level PVC cistern white 10litre |
| 19 | Wash basin 550x440 |
| 20 | C.I./MS brackets for Sink and wash basin |
| 21 | Brass bib cock 15mm dia.(weighing400gm) |
| 22 | Brass stop cock 15mm dia. ( weighing 400gm ) |
| 23 | PTMT bib cock 15mm dia |
| 24 | PTMT pillar cock 15mm dia |
| 25 | PTMT stop cock 15mm dia |
| 26 | PTMT angle stop cock 15mm dia |
| 27 | Providing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 28 | 15 mm nominal bore |
| 29 | 20 mm nominal bore |
| 30 | 25 mm nominal bore |
| 31 | 50 mm nominal bore. |
| 32 | Ball Cock (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 33 | 15 mm nominal bore |
| 34 | 20 mm nominal bore |
| 35 | 25 mm nominal bore |
| 36 | Pastic ball Cock 15mm with gola & rod (prayag) |
| 37 | Pastic ball Cock 20mm with gola & rod (prayag) |
| 38 | CP brass bib cock 15mm |
| 39 | CP brass bib cock 15mm( with nozzle) |
| 40 | PVC long flush Bend |
| 41 | CP brass long nose bib cock 15mm |
| 42 | CP brass shower rose with arm ( Square or round shape 150 mm ) |
| 43 | CP brass angle valve 15mm |
| 44 | CP brass pillar cock |
| 45 | Stainless steel jet washer with hose pipe for EWC of approved make . |
| 46 | White plastic seat with lid, CP brass hinges and rubber buffers |
| 47 | PVC connection pipe ( prayag or equivalent) 450cm long, 15mm bore |
| 48 | Semi rigid PVC waste pipe 32mm dia. |
| 49 | Semi rigid PVC waste pipe 40mm dia. |
| 50 | Semi rigid PVC waste pipe 50mm dia. |
| 51 | CP brass waste 32mm |
| 52 | CP brass waste 50mm |
| 53 | CP brass bottle trap 32mm( ESS ESS or equivalent) |
| 54 | CI Gully trap cover 300x300mm, 4.50kg weight |
| 55 | Rectangular 455x610mm SCI Manhole cover (low duty) 23kg weight |
| 56 | CI Grating for RWP/Gully trap 150x150 mm |
| 57 | PVC cistern handles |
| 58 | PVC cistern washers |
| 59 | PVC cistern ball cock |
| 60 | PVC washers for taps |
| 61 | Duracell battery 9 V |
| 62 | PVC overhead tank with suitable locking arrangement |
| 63 | GI tank nipple 15mm |
| 64 | Drip seal |
| 65 | Portland cement |
| 66 | White cement (1kg pack) |
| 67 | CP brass floor trap grating with frame 100mm( with hole or without hole) |
| 68 | GI pipe 15mm nominal bore |
| 69 | GI pipe 20mm nominal bore |
| 70 | GI pipe 25 mm nominal bore |
| 71 | GI pipe 40 mm nominal bore |
| 72 | GI union 15mm dia |
| 73 | GI union 20mm dia |
| 74 | GI union 25mm dia |
| 75 | GI union 50 mm dia |
| 76 | GI tee 15mm dia |
| 77 | GI tee 20mm dia |
| 78 | GI tee 25mm dia |
| 79 | GI socket 15mm dia |
| 80 | GI socket 20mm dia |
| 81 | GI elbow 15mm dia |
| 82 | GI elbow 20mm dia |
| 83 | GI elbow 25mm dia |
| 84 | CP brass extension nipple (1/2\\" x 2\\") |
| 85 | Mild steel hexa nipple / plug 15mm. |
| 86 | Mild steel hexa nipple / plug 20mm. |
| 87 | GI nipple 15mm dia 150 mm long |
| 88 | GI nipple 15mm dia 100 mm long |
| 89 | GI nipple 15mm dia 50 mm long |
| 90 | GI nipple 20mm dia 230 mm long |
| 91 | GI nipple 20mm dia 150 mm long |
| 92 | GI nipple 20mm dia 50 mm long |
| 93 | Supplying SCI soilwaste and vent single socketed pipe 1.8 m long 100 mm dia |
| 94 | Coarse sand (Zone-III) |
| 95 | Crushed Stone Aggregate 10 mm nominal size |
| 96 | 75 x 22mm soft wood (partal) sections |
| 97 | 19mm thick commercial block board |
| 98 | 6mm thick commercial ply |
| 99 | Float Glass sheet of nominal thickness 4mm thick(weight not less than 10kg per sqm, Cutting/wastage included as per size requirement at site) |
| 100 | Glass sheet 5mm thick(Cutting/wastage included as per size requirement at site) |
| 101 | Hydraulic door closer bottle type MS body |
| 102 | Glass putty |
| 103 | M-seal (pack of 100gms) |
| 104 | Door spring |
| 105 | Magnetic catcher double strip horizontal type. |
| 106 | Aluminium floor door stopper with twin rubber. |
| 107 | Providing metallic decorative 50 mm cupboard or wardrobe knobs with nuts complete |
| 108 | Providing metallic decorative 75 mm cupboard or wardrobe handles with nuts complete |
| 109 | Providing PVC tank cover for over head tank 500 litre capacity |
| 110 | Providing CP brass health faucet ( hand shower plus connection pipe) for European seat of Jaiquar or equivalent i/c extension nipple and CP tee as required to execute the connection all complete as per direction of Engineer-in-charge. |
| 111 | Providing CP brass Towel rod 600 mm |
| 112 | Bevelled edge looking mirror of superior glass 60x45 cm |
| 113 | 6mm thick hard board backing |
| 114 | Galvanised wire mesh of average width of aperture 1.4mm and nominal dia. of wire 0.63mm |
| 115 | Glass/acrylic shelf 450x120x5mm with anodised acrylic frame and screws complete. |
| 116 | Aluminium door seal 900mm |
| 117 | Oxidised MS sliding door bolt 250 x 16mm |
| 118 | Oxidised MS tower bolt 250x10mm |
| 119 | Oxidised MS tower bolt 150x10mm |
| 120 | Oxidised MS handle 125mm |
| 121 | Oxidised MS handle 75mm |
| 122 | Anodised aluminium sliding door bolt 250 x 16mm |
| 123 | Anodised aluminium tower bolt 200x10mm |
| 124 | Anodised aluminium tower bolt 150x10mm |
| 125 | Anodised aluminium handle 125mm with plate 175x32mm |
| 126 | Anodised aluminium handle 75mm with plate 125x32mm |
| 127 | PVC rawl plug 40mm long |
| 128 | MS wooden screws 40mm |
| 129 | MS wooden screws 35mm |
| 130 | MS wooden screws 20mm |
| 131 | MS nails all sizes |
| 132 | Nickel plated MS pipe 20mm dia (curtain rods) |
| 133 | Nickel plated MS curtain brackets 20mm |
| 134 | Stainless steel Curtain pipe 25 mm dia |
| 135 | SS curtain brakets 25 mm dia |
| 136 | Fevicol /araldite adhesive |
| 137 | Providing acrylic name plates of size 300x300 mm with writing the required matter with tape of approved colour complete as per the direction of Engineer in Charge. |
| 138 | Providing PTMT liquid soap container of 400 ml capacity |
| 139 | Providing CP brass soap dish of approved make and quality like ESS ESS, ESSCO or equivalent including necessary screws etc. complete as per the direction of Engineer in Charge. |
| 140 | Providing C.P. wall mixer ( of Jaquar or equivalent ) approved quality conforming to IS standards a)15 mm nominal bore. |
| 141 | Providing brass phase (Spindle) for pillar tap /CP taps of Excel or eqivalent a)15 mm nominal bore. |
| 142 | Providing CP brass Towel ring |
| 143 | Providing interal fittings/Siphon for PVC Cistern of CERA or equivalent quality |
| 144 | Providing C.P. Wash basin mixer (of Excel or equivalent)approved quality conforming to IS standards a)15 mm nominal bore. |
| 145 | Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 32 mm dia |
| 146 | Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 75 mm dia |
| 147 | Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 110 mm dia |
| 148 | Providing uPVC pipe(working pressure 4 kg/cm2) single socketed pipe 150 mm dia |
| 149 | Providing powder coated / Stainless steel drawer channels 450 mm long |
| 150 | Brass cupboard lock 6 levers of approved quality, |
| 151 | a) 50 mm Size |
| 152 | Providing brass metre coupling of 15mm nominal dia. |
| 153 | Providing clear silicon tubes of approved brand and manufacture & as per the direction of engineer-in-Charge |
| 154 | Providing PVC plain bend (a) 100 mm dia |
| 155 | Providing PVC plain Tee (a) 100 mm dia |
| 156 | Providing PVC Nahani Trap (a) 100 mm dia |
| 157 | Providing Reinforced Cement concrete cover for manhole without frame of size 450x600mm |
| 158 | Providing synthetic enamel paint of approved brand and manufacture |
| 159 | Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water (a) 25mm |
| 160 | Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water (a) 20mm |
| 161 | Providing Chlorinated Polyvinyl Chloride (CPVC) ball valve (a) 25mm |
| 162 | Providing Chlorinated Polyvinyl Chloride (CPVC) union (a) 25mm |
| 163 | Providing Chlorinated Polyvinyl Chloride (CPVC) union (a) 20mm |
| 164 | Providing Chlorinated Polyvinyl Chloride (CPVC) tank nipple (a) 25mm |
| 165 | Providing Chlorinated Polyvinyl Chloride (CPVC) Tee (Brass) (a) 3/4\\"x 1/2\\" |
| 166 | Providing Chlorinated Polyvinyl Chloride (CPVC) Elbow (Brass) (a) 3/4\\"x 1/2\\" |
| 167 | Providing Chlorinated Polyvinyl Chloride (CPVC) Male threaded Adapter (MTA)/ Female threaded Adapter (FTA) brass (a) 3/4\\"x1/2\\" |
| 168 | Providing Brass Ferrule-15mm dia |
| 169 | Providing Brass Ferrule-25mm dia |
| 170 | Providing auto close hinges of Hettich or equivalent make for kitchen cabinets. |
| 171 | Providing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms. |
| 172 | Providing CP brass Swan Neck Pillar cock of approved make and manufacture all complete and as per direction of Engineer-in-Charge. |
| 173 | Providing SS cylindrical knob lock set with one side key and other side knob for flush door |
| 174 | SH: - Credit Items |
| 175 | Credit for old dismantled/unserviceable material: - |
| 176 | a) Brass bib cock/stop cock/ball valves/CP bibcock/CP stopcock/C.P angle cock/ brass gate valves/CP pillar cock. |
| 177 | b) Hydraulic Door Closer/door floor spring :- |
| 178 | c) Unserviceable door/window shutter with or without chowkhats(steel) i/c fittings |
| 179 | d) PVC Bib cock/stop cock/ball cock/WC seat cover/ internal fitting of low level PVC cistern, PVC Connection/PVC waste pipes etc. |
| 180 | e) PVC water storage tanks upto 1000 litres |
| 181 | f) Old M.S fittings of all sizes like handle, tower bolts, sliding door bolt, door stoppers,window fasteners, window stay, helical door spring , hinges etc. |
| 182 | g) GI pipes and fittings |
| 183 | All dia |
| 184 | h) Old Aluminium section/old aluminium scrap etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender